Soundarya Mary, A and Bhojanaa, K.B and Murugan, P and Pandikumar, A (2021) Experimental and theoretical study on optimizing caxBa1-xSnO3 perovskite materials as photoanode of dye-sensitized solar cells. Journal of alloys and compounds, 888.

Radhakrishnan, S and Sekar, R and Rajasekar, B and Mathiyarasu, J and Ragupathi, P and Ulaganathan, M (2021) Electrodeposited partially oxidized Bi & NiCo alloy based thin films for aqueous hybrid high energy microcapacitor. Journal of alloys and compounds, 888.

Velmurugan Adith, R and Madasamy, K and Ebenezer, J and Mohanapriya, N and Kosame, S and Ramesh, B.K. and Kathiresan, M and Senthilkumar, S and Naveen , Chandrasekaran (2021) Molecularly engineered oxygen deficient magnetite decorated carbon as electrocatalysts for oxygen reduction reaction. Molecular catalysis, 514.

Arun, S and Uday Venkat Kiran, K and Mithin Kumar, S and karnan, M and Sathish, M and Sundar Mayavan, M (2021) Effect of orange peel derived activated carbon as a negative additive for lead-acid battery under high rate discharge condition. Journal of Energy Storage, 34.

Jayachitra, S and Ravi, P and Murugan , P and Sathish, M (2021) Supercritically exfoliated Bi2Se3 nanosheets for enhanced photocatalytic hydrogen production by topological surface states over TiO2. Journal of Colloid and Interface Science, 605.

Parthiban, V. and Panda, S.K. and Sahu, A.K. (2018) Highly fluorescent carbon quantum dots-Nafion as proton selective hybrid membrane for direct methanol fuel cells. Electrochimica Acta, 292. pp. 855-864. ISSN 0013-4686

Marimuthu, M. and Praveen Kumar, B. and Mariya Salomi, L. and Veerapandian, M. and Balamurugan, K. (2018) Methylene Blue-Fortified Molybdenum Trioxide Nanoparticles: Harnessing Radical Scavenging Property. ACS Applied Materials & Interfaces, 10 (50). pp. 43429-43438. ISSN 1944-8244

Steffy, N.J. and Vinod Selvaganesh, S. and Madan Kumar, L. and Sahu, A.K. (2018) Online monitoring of fuel starvation and water management in an operating polymer electrolyte membrane fuel cell by a novel diagnostic tool based on total harmonic distortion analysis. Journal of Power Sources, 404. pp. 81-88. ISSN 0378-7753

Ette, P.M. and Selvakumar, K. and Senthil Kumar, S.M. and Ramesha, K. (2018) Silica template assisted synthesis of ordered mesoporous be MnO2 nanostructures and their performance evaluation as negative electrode in Li-ion batteries. Electrochimica Acta, 282. pp. 532-539. ISSN 0013-4686

Padmini, M. and Elumalai, P. and Thomas, T. (2018) Symmetric supercapacitor performances of CaCu3Ti4O12 decorated polyaniline nanocomposite. Electrochimica Acta, 292. pp. 558-567. ISSN 0013-4686

Mohammed-Ibrahim, J. and Sun, X. (2018) Recent progress on earth abundant electrocatalysts for oxygen evolution reaction (OER) in alkaline medium to achieve efficient water splitting – A review. Journal of Power Sources, 400. pp. 31-68. ISSN 0378-7753

Suriyakumar, S. and Gopi, S. and Kathiresan, M. and Bose, S. and Gowd, E.B. and Nair, J.R. and Angulakshmi, N. and Meligrana, G. and Bella, F. and Gerbaldi, C. and Manuel Stephan, A. (2018) Metal organic framework laden poly(ethylene oxide) based composite electrolytes for all-solid-state Li-S and Li-metal polymer batteries. Electrochimica Acta, 285. pp. 355-364. ISSN 0013-4686

Sankararao, M. and Josephine, K. and Sharma, G.V.R. and Suresh, C. and Mathiyarasu, J. (2018) Non-enzymatic electrochemical hydrogen peroxide detection using MoS2- Interconnected porous carbon heterostructure. Journal of Electroanalytical Chemistry, 823. pp. 429-436. ISSN 1572-6657

Pandia Rajathi, M. and Sivakumar, C. and Sheela , B. (2018) Methanol electro-oxidation by nanostructured Pt/Cu bimetallic on poly 3,4 ethylenedioxythiophene (PEDOT). Electrochimica Acta, 282. pp. 163-170. ISSN 0013-4686

Thamilselvan, A. and Govindan, K. and Nesaraj, S. and Uma Maheswari, S. and Oren, Yoram and Noel, M. and James, E.J. (2018) Investigation on the effect of organic dye molecules on capacitive deionization of sodium sulfate salt solution using activated carbon cloth electrodes. Electrochimica Acta, 279. pp. 24-33. ISSN 0013-4686

Mani, V. and Suresh babu, G.N. and Kalaiselvi, N. (2018) Sn-Fe5(PO4)4(OH)3.2H2O/graphene: A new electrode for superior rate applications in Li/Na ion batteries. Journal of Power Sources, 395. pp. 31-40. ISSN 0378-7753

Premlatha, S. and Ramesh Bapu, G.N.K. (2018) Fabrication of Co-Ni alloy nanostructures on copper foam for highly sensitive amperometric sensing of acetaminophen. Journal of Electroanalytical Chemistry, 822. pp. 33-42. ISSN 1572-6657

Muneeswaran, G. and Pandiaraj, M. and Kartheeswaran, S. and Sankaralingam, M. and Muthukumar, K. and Karunakaran, C. (2018) Molecular dynamics simulation approach to explore atomistic molecular mechanism of peroxidase activity of apoptotic cytochrome c mutants. Informatics in Medicine Unlocked, 11. pp. 51-60. ISSN 2352-9148

Sathiyaseelan, D. and Manju Bhargavi, G. and Noel, N. and Balaguru Rayappan, J.B. and Hariharan, G. (2018) Wavelet based spectral approach for solving surface coverage model in an electrochemical arsenic sensor - An operational matrix approach. Electrochimica Acta, 266. pp. 27-33. ISSN 0013-4686

Narayanaru, S. and Chinnaiah, J. and Phani, K.L.N. and Scholz, F. (2018) pH dependent CO adsorption and roughness-induced selectivity of CO2 electroreduction on gold surfaces. Electrochimica Acta, 264. pp. 269-274. ISSN 0013-4686

Suriyakumar, S. and Kanagaraj, M. and Kathiresan, M. and Angulakshmi, N. and Thomas, S. and Manuel Stephan, A. (2018) Metal-organic frameworks based membrane as a permselective separator for lithium-sulfur batteries. Electrochimica Acta, 265. pp. 151-159. ISSN 0013-4686

Dhanasekaran, P. and Selvaganesh, S.V. and Shukla, A. and Nagaraju, N. and Bhat, S.D. (2018) Boosting Pt oxygen reduction reaction activity and durability by carbon semi-coated titania nanorods for proton exchange membrane fuel cells. Electrochimica Acta, 263. pp. 596-609. ISSN 0013-4686

Mohammed Ibrahim , J. and Prakash, A.S. (2018) Advancement of technology towards developing Na-ion batteries. Journal of Power Sources, 378. pp. 268-300. ISSN 0378-7753

Anandha ganesh, P. and Jeyakumar, D. (2018) Hierarchical approach of mitigating carbon influence in nano-porous electro-catalyst with unique surface islands for efficient methanol resistive oxygen reduction. Electrochimica Acta, 262. pp. 306-318. ISSN 0013-4696

Karthick, S. and Saraswathy, V. and Seung-Jun, K. and Han-Seung, L. and Natarajan, R. and Dong-Jin, P. (2018) A novel in-situ corrosion monitoring electrode for reinforced concrete structures. Electrochimica Acta, 259. pp. 1129-1144. ISSN 0013-4686

Kannan, P. and Jithinraj, P. and Natesan, M. (2018) Multiphasic inhibition of mild steel corrosion in H2S gas environment. Arabian Journal of Chemistry, 11. pp. 388-404.

Sharma, P. and Radhakrishnan, S. and Khilb, Myung-Seo and Kim, Hak-Yong and Kim, Byoung-Suhk (2018) Simple room temperature synthesis of porous nickel phosphate foams for electrocatalytic ethanol oxidation. Journal of Electroanalytical Chemistry, 808. pp. 236-244. ISSN 1572-6657

Dhelipan, M. and Arunchander, A. and Sahu, A.K. and Kalpana, D. (2017) Activated carbon from orange peels as supercapacitor electrode and catalyst support for oxygen reduction reaction in proton exchange membrane fuel cell. Journal of Saudi Chemical Society, 21 (4). pp. 487-494. ISSN 1319-6103

Mullaivananathan, V. and Sathish, R. and Kalaiselvi, N. (2017) Coir Pith Derived Bio-carbon: Demonstration of Potential Anode Behavior in Lithium-ion Batteries. Electrochimica Acta, 225. pp. 143-150. ISSN 0013-4686

Veluchamy, A. and Sherwood, D. and Emmanuel, B. and Cole, I.S. (2017) Critical review on the passive film formation and breakdown on iron electrode and the models for the mechanisms underlying passivity. Journal of Electroanalytical Chemistry, 785. pp. 196-215. ISSN 1572-6657

Murugadoss, G. and Thangamuthu, R. and Saranyan, V. and Kanda, H. and Ito, S. (2017) Caesium �Methyl Ammonium Mixed-Cation Lead Iodide Perovskite Crystals: Analysis and Application for Perovskite Solar Cells. Electrochimica Acta, 257. pp. 267-280. ISSN 0013-4686

Kiruthiga, R. and Nithya, C. and Karvembu, R. and Venkata Rami Reddy, B. (2017) Reduced Graphene Oxide Embedded V2O5 Nanorods and Porous Honey Carbon as High Performance Electrodes for Hybrid Sodium-ion Supercapacitors. Electrochimica Acta, 256. pp. 221-231. ISSN 0013-4686

Laisa, C.P. and Ramesha, R.N. and Ramesha, K. (2017) Enhanced electrochemical performance of lithium rich layered cathode materials by Ca2+ substitution. Electrochimica Acta, 256. pp. 10-18. ISSN 0013-4686

Saravanan, K. and Kalaiselvi, N. (2017) Reaping the redox switching capability of vanadium in Li3V2(PO4)3/ HHC composite to demonstrate the rocking chair electrode performance. Journal of Power Sources, 366. pp. 207-217. ISSN 0378-7753

Karuppusamy, S. and Babu, D. and Venkatesh, V.K. and Marken, F. and Anbu Kulandainathan, M. (2017) Highly conductive nano-silver textile for sensing hydrogen peroxide. Journal of Electroanalytical Chemistry, 799. pp. 473-480. ISSN 1572-6657

Ramesha, R.N. and Laisa, C.P. and Ramesha, K. (2017) Improving Electrochemical Stability by Transition Metal Cation Doping for Manganese in Lithium-rich Layered Cathode, Li1.2Ni0.13Co0.13Mn0.54-xMxO2 (M = Co, Cr and Fe). Electrochimica Acta, 249. pp. 377-386. ISSN 0013-4686

Kanagavalli, P. and Sudha, R. and Boopathi, S. and Senthil Kumar, S. (2017) Electrochemical synthesis of Au-Ni(OH)2-nanocomposite on glassy carbon electrode as highly active bifunctional electrocatalyst for oxygen evolution and oxygen reduction reactions. Electrochemistry Communications, 82. pp. 61-65. ISSN 1388-2481

Lee, H. and Kwon, S. and Karthick, S. and Saraswathy, V. and Muralidharan, S. (2017) Studies on the development of activated binary clay and corrosion monitoring using embedded sensor. Arabian Journal of Chemistry. ISSN 1878-5352

Chiama, S.L. and Lim, H.N. and Foo, C.Y. and Pandikumar, A. and Huang, N.M. (2017) How Did Nickel Cobaltite Reinforced Carbon Microfibre Symmetrical Supercapacitor Fare Against A Commercial Supercapacitor? Electrochimica Acta, 246. pp. 1141-1146. ISSN 0013-4686

Ranjith Kumar, D. and Kesavan, S. and Lara Baynosa, M. and Shim, J. (2017) 3,5-Diamino-1,2,4-triazole@electrochemically reduced graphene oxide film modified electrode for the electrochemical determination of 4-nitrophenol Deivasigamani Ranjith. Electrochimica Acta, 246. pp. 1131-1140.

Venkadesh, A. and Radhakrishnan, S. and Mathiyarasu, J. (2017) Eco-friendly synthesis and morphology-dependent superior electrocatalytic properties of CuS nanostructures. Electrochimica Acta, 246. pp. 544-552. ISSN 0013-4686

Abdul Ahada, S. and Ramesh Kumara, P. and Kim, Joo-Hyung and Kim, Dong Jun and Ragupathy, P. (2017) Catecholamine-Functionalized Reduced Graphene Oxide: A Scalable Carbon Host for Stable Cycling in Lithium–Sulfur Batteries. Electrochimica Acta, 246. pp. 451-458. ISSN 0013-4686

Mohamed Jaffer Sadiq, M. and Mutyala, S. and Mathiyarasu, J. and Bhat, D.K. (2017) RGO/ZnWO4/Fe3O4 nanocomposite as an efficient electrocatalyst for oxygen reduction reaction. Journal of Electroanalytical Chemistry, 709. pp. 102-110. ISSN 1572-6657

Kundu, S. and Sarojinijeeva, P. and Karthick, R. and Anantharaj, G. and Bera, R. and Anandan, S. and Patra, A. and Ragupathy, P. and Selvaraj, M. and Jeyakumar, D. and Vijayamohanan, K. Pillai (2017) Enhancing the Efficiency of DSSCs by the Modification of TiO2 Photoanodes using N, F and S, co-doped Graphene Quantum Dots. Electrochim Acta, 242. pp. 337-343. ISSN 0013-4686

Pavithra, N. and Velayutham, D. and Sorrentino, A. and Anandan, S. (2017) Thiourea incorporated poly(ethylene oxide) as transparent gel polymer electrolyte for dye sensitized solar cell applications. Journal of Power Sources, 353. pp. 245-253. ISSN 0378-7753

Arunchander, A. and Gouse Peera, S. and Sahu, A.K. (2017) Synthesis of flower-like molybdenum sulfide/graphene hybrid as an efficient oxygen reduction electrocatalyst for anion exchange membrane fuel cells. Journal of Power Sources, 353. pp. 104-114. ISSN 0378-7753

Padmini, M. and Karthik Kiran, S. and Lakshminarasimhan, N. and Sathish, M. and Elumalai, P. (2017) High-performance Solid-state Hybrid Energy-storage Device Consisting of Reduced Graphene-Oxide Anchored with NiMn-Layered Double Hydroxide. Electrochimica Acta, 236. pp. 359-370. ISSN 0013-4686

Akula, S. and Parthiban, V. and Peera, G. and Singh, B.P. and Dhakate, S.R. and Sahu, A.K. (2017) Simultaneous Co-Doping of Nitrogen and Fluorine into MWCNTs: An In-Situ Conversion to Graphene Like Sheets and Its Electro-Catalytic Activity toward Oxygen Reduction Reaction. Journal of the Electrochemical Society. ISSN 0013-4651

Madhan, M. and Kimidi, S.S. and Gunasekaran, S. and Arunachalam, S. (2017) Should Indian researchers pay to get their work published? Current Science, 112 (4). pp. 703-713. ISSN 0011-3891

Elizabeth, I. and Singh, B.P. and Bijoy, T.K. and Reddy, V.R. and Karthikeyan, G. and Singh, V.N. and Dhakate, S.R. and Murugan, P. and Gopukumar, S. (2017) In-situ Conversion of Multiwalled Carbon Nanotubes to GrapheneNanosheets: An Increasing Capacity Anode for Li Ion Batteries. Electrochim Acta, 231. pp. 255-263. ISSN 0013-4686

Duraisamy, E. and Gurunathan, P. and Das, Himadri T. and Ramesha, K. and Elumalai, P. (2017) [Co(salen)] derived Co/Co3O4 nanoparticle@carbon matrix as highperformance electrode for energy storage applications. Journal of Power Sources, 344. pp. 103-110. ISSN 0378-7753

Premlatha, S. and Sivasakthi, P. and Ramesh Bapu, G.N.K. (2017) Synthesis of Co-CeO2 nanoflake arrays and their application to highlysensitive and selective electrochemical sensing of hydrazine. Journal of Electroanalytical Chemistry, 788. pp. 107-117. ISSN 1572-6657

Elizabeth, I. and Nair, A.K. and Singh, B.P. and Gopukumar, S. (2017) Multifunctional Ni-NiO-CNT Composite as High Performing FreeS tanding Anode for Li Ion Batteries and Advanced Electro Catalyst for Oxygen Evolution Reaction. Electrochimica Acta, 230. pp. 98-105. ISSN 0013-4686

Karnan, M. and Subramani, K. and Srividhya, P.K. and Sathish, M. (2017) Electrochemical Studies on Corncob Derived Activated Porous Carbon for Supercapacitors Application in Aqueous and Non-aqueous Electrolytes. Electrochim Acta, 228. pp. 586-596. ISSN 0013-4686

Christy, M. and Anupriya, A. and Zahoor, A. and Moon, K.U. and Oh, M.Y. and Manuel Stephan, A. and Nahm, K.S. (2017) Role of solvents on the oxygen reduction and evolution of rechargeable Li-O2 battery. Journal of Power Sources, 342. pp. 825-835. ISSN 0378-7753

Manovah David, T. and Wilson, P. and Manju, V. and Palaniappan, A. and Sagayaraj, P. and Ramesh, C. (2017) Electrocatalytic Investigation of Group X Metal Nanoparticles Loaded TiO2 Nanotubes Powder Prepared by Rapid Breakdown Anodization for Selective H2O2 Sensing. Journal of The Electrochemical Society, 164 (7). B356-B365. ISSN 0013-4651

Vineesh, T.V. and Archana, S. and Rajappa, S. and Pal, S. and Alwarappan, S. and Narayanan, TN. (2017) Non-Precious Metal/Metal Oxides & Nitrogen Doped Reduced Graphene Oxide based Alkaline Water Electrolysis Cell. CHEMCATCHEM. ISSN 1867-3880 (In Press)

Maharjan, M. and Bhattarai, A. and Ulaganathan, M. and Wai, N. and Oo, M.O. and Wang, J.Y. and Lim, T.M. (2017) High surface area bio-waste based carbon as a superior electrode for vanadium redox flow battery. Journal of Power Sources, 362. pp. 50-56. ISSN 0378-7753

Arunachalam, S. and Madhan, M. and Gunasekaran, S. (2017) Chemistry research in India: making progress, but not rapidly. Current Science, 112 (7). pp. 1330-1339. ISSN 0011-3891

Saravanan, K. and Suganya, V. and Kalaiselvi, N. (2016) Newer polyanionic bio-composite anode for sodium ion batteries. Journal of Power Sources, 340. pp. 401-410. ISSN 0378-7753

Rajiv Gandhi, M and Vasudevan, S and Shibayama, A and Yamada, M (2016) Graphene and Graphene-Based Composites: A Rising Star in Water Purification - A Comprehensive Overview. ChemistrySelect (1). pp. 4358-4385.

Ba-Ying, Wen and Jun, Yi and Ya-Hao, Wang and Kanagaraj, M and Hua, Zhang and Kathiresan, M and Jian-Feng, Li and Zhong-Qun, Tian (2016) In-situ monitoring of redox processes of viologen at Au(hkl)single-crystal electrodes using electrochemical shell-isolated nanoparticle-enhanced Raman spectroscopy. Electrochemistry Communications, 72. pp. 131-134. ISSN 1388-2481

Mutyala, Sankararao and Mathiyarasu, J (2016) A highly sensitive NADH biosensor using nitrogen doped graphene modified electrodes. Journal of Electroanalytical Chemistry, 775. pp. 329-336. ISSN 1572-6657

Thirunakaran, R and Lew, Gil Hwan and Yoon, Won-Sub (2016) Novel chelating agent assisted dual doped spinel via sol–gel method for lithium rechargeable batteries. Journal of Electroanalytical Chemistry, 767. pp. 141-152. ISSN 1572-6657

Ananthi, Arjunan and Phani, KLN (2016) Self-assembly of gold nanoparticles on sulphide functionalized polydopamine in application to electrocatalytic oxidation of nitric oxide. Journal of Electroanalytical Chemistry, 764. pp. 7-14. ISSN 1572-6657

Rajesh, Rajagopal and Senthil Kumar, S.M. and Abirami, R and Rajasekar, K and Balkis, Ameen Kamaludeen (2016) Synthesis and electrochemical studies of Ta – Graphene nanocomposite film modified platinum electrode. Journal of Electroanalytical Chemistry, 780. pp. 53-59. ISSN 1572-6657

Shukla, A and Bhat, SD and Vijayamohanan, Pillai K (2016) Simultaneous unzippingandsulfonationofmulti-walledcarbon nanotubestosulfonatedgraphenenanoribbonsfornanocomposite membranesinpolymerelectrolytefuelcells. Journal of MembraneScience, 520. pp. 657-670. ISSN 0376-7388

Laisa, C.P and Nanda Kumar, A.K and Selva Chandrasekaran, S and Murugan, P and Lakshminarasimhan, N and Govindaraj, R and Ramesha, K (2016) A comparative study on electrochemical cycling stability of lithium rich layered cathode materials Li1.2Ni0.13M0.13Mn0.54O2 where M ¼ Feor Co. Journal of Power Sources, 324. pp. 462-474. ISSN 0378-7753

Murugadoss, G and Kanda, H and Tanaka, S and Nishino, H and Ito, S and Imahori, H and Umeyama, T (2016) An efficient electron transport material of tin oxide for planar structure perovskite solar cells. Journal of Power Sources, 307. pp. 891-897. ISSN 0378-7753

Elizabeth, I and Singh, BP and Trikha, S and Gopukumar, S (2016) Bio-derived hierarchically macro-meso-micro porous carbon anode for lithium/sodium ion batteries. Journal of Power Sources, 329. pp. 412-421. ISSN 0378-7753

Venugopal, NKA and Joseph, J (2016) Electrochemically formed 3D hierarchical thin films of cobaltemanganese (CoeMn) hexacyanoferrate hybrids for electrochemical applications. Journal of Power Sources, 305. pp. 249-258. ISSN 0378-7753

Dhanasekaran, P and Selvaganesh, SV and Vinod, S and Bhat, SD (2016) Nitrogen and carbon doped titanium oxide as an alternative and durable electrocatalyst support in polymer electrolyte fuel cells. Journal of Power Sources, 304. pp. 360-372. ISSN 0378-7753

Lin, HH and Peng, JD and Suryanarayanan, V and Velayutham, D and Ho, KC (2016) Perfluoro anion based binary and ternary ionic liquids as electrolytes for dye-sensitized solar cells. Journal of Power Sources, 311. pp. 167-174. ISSN 0378-7753

Paul Raj, R. and Mohan, S. and Jha, S.K. (2016) Controlled reverse pulse electrosynthesized spikepiece-structured Ni/Ni(OH)2 interlayer nanoplates for electrochemical pseudocapacitor applications. Chemical Communications, 50. pp. 1930-1933. ISSN 1359-7345

Kaleesh Kumar, M. and Vishnu Prataap, R.K. and Mohan, S. and Jha, S.K. (2016) Preparation of electro-reduced graphene oxide supported walnut shape nickel nanostructures, and their application to selective detection of dopamine. Microchimica Acta, 183. pp. 1759-1768. ISSN 0026-3672

Jha, N.S. and Satyendra , M. and Mamidi, S. and Ashalatha, S. and Archita , M. and Jha, S.K. and Avadhesha , S. (2016) Targeting human telomeric G-quadruplex DNA with curcumin and its synthesized analogues under molecular crowding conditions. RSC Advances, 6. pp. 7474-7487. ISSN 2046-2069

Priyadharshni, S. and Selvam, M. (2015) Polypyrrole Sulfonate as a Transparent Conducting Film for Photovoltaic Applications. International Journal of Polymeric Materials and Polymeric Biomaterials, 64. pp. 47-53. ISSN 0091-4037

Dhanraj, B.Shinde and Vishal, M.Dhabale and Sreekumar, Kurungot and Vijayamohanan, K.Pillai (2015) Electrochemical preparation of nitrogen-doped graphene quantum dots and their size-dependent electrocatalytic activity for oxygen reduction. Bulletin of Materials Science, 38 (2). pp. 1-8. ISSN 0250-4707

Sekar, R. and Jagadesh, K.K. and Ramesh Bapu, G.N.K. (2015) Role of amino acids on electrodeposition and characterisation of zinc from alkaline zincate solutions. Transactions of the Institute of Materials Finishing. (In Press)

Bharathidasan, T. and Narayanan, T.N. and Sathyanaryanan, S. and Sreejakumari, S.S. (2015) Above 170 degree water contact angle and oleophobicity of fluorinated graphene oxide based transparent polymeric films. Carbon, 84. pp. 207-2013. ISSN 0008-6223

Vineesh, T.V. and Alwarappan, S. and Narayanan, T.N. (2015) The improved electrochemical performance of cross-linked 3D graphene nanoribbon monolith electrodes. Nanoscale, 7. pp. 6504-6509. ISSN 2040-3364

Jha, Shailendra (2014) Synthesis of 3D porous CeO2/reduced graphene oxide xerogel composite and low level detection of H2O2. Electrochimica Acta, 120. pp. 308-313. ISSN 0013-4686

Manikandan, P. and Periasamy, P. (2014) Novel mixed hydroxy-carbonate precursor assisted synthetic technique for LiNi1/3Mn1/3Co1/3O2 cathode materials. Materials Research Bulletin, 50. pp. 132-140. ISSN 0025-5408

Saravanan, M. and Ganesan, M. and Ambalavanan, S. (2014) An in situ generated carbon as integrated conductive additive for hierarchical negative plate of lead-acid battery. Journal of Power Sources, 251. pp. 20-29. ISSN 0378-7753

Cheng, J.H. and Pan, C.J. and Nithya, C. and Thirunakaran, R. and Gopukumar, S. and Chen, C.H. and Lee, J.F. and Chen, J.M. and Sivashanmugam, A. and Hwang, B.J. (2014) Effect of Mg doping on the local structure of LiMgyCo1yO2 cathode material investigated by X-ray absorption spectroscopy. Journal of Power Sources, 252. pp. 292-297. ISSN 0378-7753

Manikandan, P. and Periasamy, P. and Jagannathan, R. (2014) Faceted shape-drive cathode particles using mixed hydroxy-carbonate precursor for mesocarbon microbeads versus LiNi1/3Mn1/3Co1/3O2 Li-ion pouch cell. Journal of Power Sources, 245. pp. 501-509. ISSN 0378-7753

Vijayalakshmi, S. and Subramanian, B. (2014) Enhanced performance of dye-sensitized solar cells with TiO2blocking layers and Pt counter electrodes prepared by physical vapordeposition (PVD). Electrochimica Acta, 116. pp. 334-342. ISSN 0013-4686

Anandhakumar, S. and Dhanalakshmi, K. and Mathiyarasu, J. (2014) Non-enzymatic organophosphorus pesticide detection using gold atomic cluster modified electrode. Electrochemistry Communications, 38. pp. 15-18. ISSN 1388-2481

Anantharaj, S. and Nithiyanantham, U. and Sivasankara Rao , E. and Kundu, S. (2014) Osmium Organosol on DNA: Application in Catalytic Hydrogenation Reaction and in SERS Studies. Industrial & Engineering Chemistry Research, 53. pp. 19228-19238.

Bhuvaneswari, D. and Kalaiselvi, N. (2014) Custom designed nanocrystalline Li2MSiO4/ reduced graphene oxide (M = Fe, Mn) formulations as high capacity cathodes for rechargeable lithium batteries†. Dalton Trans., 43. pp. 18097-18103.

Raju, T. and Ganesh, V. (2014) Chemically modified flexible strips as electrochemical biosensors. Analyst, 139. pp. 4661-4672.

Angulakshmi, N. and Senthilkumar, R. and Anbukulandainathan, M. and Manuelstephan, A. (2014) Composite Polymer Electrolytes Encompassing Metal Organic Frame Works: A New Strategy for All-Solid-State Lithium Batteries. Journal of Physical Chemistry C, 118. pp. 24240-24247. ISSN 1932-7447

Gurunathan, P. and Pedda Masthanaiah, E. and Ramesha, K. (2014) Synthesis of Hierarchically Porous SnO2 Microspheres and Performance Evaluation as Li-Ion Battery Anode by Using Different Binders. Applied Materials and Interfaces, 6. pp. 16556-64.

George Muller, J. and Karthikeyan, J. and Murugan, P. and Lakshminarasimhan, N. (2014) Influence of Structural Polymorphs on Tunable White Light Generation from Orange-Red-Emitting BiPO4:Eu3+ Phosphor by Surface Modification. Journal of Physical Chemistry C, 118. pp. 19308-19314. ISSN 1932-7447

Nithya, C. and Gopukumar, S. (2014) rGO/nano Sb composite: a high performance anode material for Na+ ion batteries and evidence for the formation of nanoribbons from the nano rGO sheet during galvanostatic cycling. Journal of Materials Chemistry A, 2. pp. 10516-10525. ISSN 0959-9428

Munaiah, Y. and Suresh, S. and Dheenadayalan, S. and Vijayamohanan, K.Pillai and Raghupathy, P. (2014) Comparative Electrocatalytic Performance of Single-Walled and Multiwalled Carbon Nanotubes for Zinc Bromine Redox Flow Batteries. Journal of Physical Chemistry D, 118. pp. 14795-14804.

Sujitha, Balsamy and Natarajan, Palani and Vedalakshmi, R. and Muralidharan, S. (2014) Triboluminescence and Vapor-Induced Phase Transitions in the Solids of Methyltriphenylphosphonium Tetrahalomanganate(II) Complexes. Inorganic Chemistry, 53. pp. 6054-6059.

Anandhakumar, S. and Rajaram, R. and Mathiyarasu, J. (2014) Unusual seedless approach to gold nanoparticle synthesis: application to selective rapid naked eye detection of mercury(II). Analyst, 139. pp. 3356-3359.

Firozbabu, K. and Narayanan, T.N. and Anbukulandainathan, M. (2014) Molecular Motions Aided Thermally Responsive Biocompatible Textile Pads. Advanced Materials Interfaces , 1. p. 1300139.

Nithiyanantham, U. and Sivasankara Rao , E. and Kundu, S. (2014) Self-assembled wire-like and honeycomb-like osmium nanoclusters (NCs) in DNA with pronounced catalytic and SERS activities. Journal of Materials Chemistry C, 2. pp. 3782-3794. ISSN 0959-9428

ThanKarajan, S. and Nanda Kumar, A.K. and Subramanian, B. (2014) Nanocrystallization in magnetron sputtered Zr–Cu–Al–Ag thin film metallic glasses. Crystal Engineering Communication, 16. pp. 2835-2844.

Karthik, P.E. and Jeyabharathi, C. and Phani, K.L.N. (2014) Oxygen evolution reaction electrocatalyzed on a Fenton-treated gold surface. Chemical Communication, 50. pp. 2787-2790.

Subramani, K. and Jeyakumar, D. and Sathish, M. (2014) Manganese hexacyanoferrate derived Mn3O4 nanocubes–reduced graphene oxide nanocomposites and their charge storage characteristics in supercapacitors. Physical Chemistry Chemical Physics, 16. pp. 4952-4961. ISSN 1463-9076

Hemalatha, K. and Prakash, A.S. and Guruprakash, K. and Jayachandran, M. (2014) TiO2 coated carbon nanotubes for electrochemical energy storage. Journal of Materials Chemistry A, 2. pp. 1757-1766. ISSN 0959-9428

Bhuvaneswari, D. and Kalaiselvi, N. (2014) In situ carbon coated LiFePO4/C microrods with improved lithium intercalation behavior. Physical Chemistry Chemical Physics, 16. pp. 1469-1478. ISSN 1463-9076

Eashwar, M. and Lakshman Kumara, A. and Sreedharb, G. and Kennedy, J. and Sureshbapu, R.H. (2014) Stainless steel in coastal seawater: sunlight counteracts biologically enhanced cathodic kinetics. Biofouling, 30 (8). pp. 929-939. ISSN 0892-7014

Kulangiappar, K. and Anbukulandainathan, M. and Raju, T. (2014) Synthetic Communications: An International Journal for Rapid Communication of Synthetic Organic Chemistry. Synthetic Communications, 1 (44). pp. 2494-2502. ISSN 0039-7911

Dhanraj, B. Shinde and Majumder, M. and Vijayamohanan, K.Pillai (2014) Counter-ion Dependent, Longitudinal Unzipping of Multi-Walled Carbon Nanotubes to Highly Conductive and Transparent Graphene Nanoribbons. Scientific Reports, 4. p. 4363. ISSN 2045-2322

Nazrulla, Mohammed Azeezulla and Sailaja , K. and Phani, K.L.N. (2014) Discerning Site Selectivity on Graphene Nanoflakes Using Conceptual Density Functional Theory Based Reactivity Descriptors. Journal of Physical Chemistry C, 118. pp. 23058-23069. ISSN 1932-7447

Sivasankara Rao , E. and Nithiyanantham, U. and Kundu, S. (2014) Enhanced catalytic and SERS activities of CTAB stabilized interconnected osmium nanoclusters. Physical Chemistry Chemical Physics, 16. pp. 22723-22734. ISSN 1463-9076

Kundu, S. and Nithiyanantham, U. (2014) DNA-Mediated Fast Synthesis of Shape-Selective ZnO Nanostructures and Their Potential Applications in Catalysis and Dye-Sensitized Solar Cells. Industrial and Engineering Chemistry Research, 53. pp. 13667-13669. ISSN 0888-5885

Sivasankara Rao , E. and Ananthakumar, R. and Anantharaj, S. and Nithiyanantham, U. and Kundu, S. (2014) Enhanced catalytic and supercapacitor activities of DNA encapsulated b-MnO2 nanomaterials. Physical Chemistry Chemical Physics, 16. pp. 21846-21859. ISSN 1463-9076

Sreekanth, N. and Phani, K.L.N. (2014) Selective reduction of CO2 to formate through bicarbonate reduction on metal electrodes: new insights gained from SG/TC mode of SECM. Chemical Communications, 50. pp. 11143-11156. ISSN 1359-7345

Saraswathy, V. and karthick, SP. (2014) Effect of ecofriendly sealing coat against corrosion protection of steel rebars in concrete. Corrosion Engineering, Science Technology, 49 (5). pp. 327-334. ISSN 1478-422X

Angappan, S. and Kalaiselvi, N. and Sudha, R. and Visuvasam, A. (2014) Electrochemical Synthesis of Magnesium Hexaboride by Molten Salt Technique. Internation Scholarly Research Notices. pp. 1-6.

Saraswathy, V. and Karthick, SP. and Muralidharan, S. (2014) Corrosion and Leaching Studies in Blended Copper Slag Mortar. Journal of Engineering and Technology, 4 (1). pp. 29-37. ISSN 2180-3811

Sankararao, M. and Mathiyarasu, J. (2014) Synthesis of Nitrogen Doped Carbon and Its Enhanced Electrochemical Activity towards Ascorbic Acid Electrooxidation. International Journal of Electrochemistry (246746). pp. 1-7. ISSN 2090-3529

Narendrakumar, A.V. and Harish, S. and James, J. (2014) New route for synthesis of electrocatalytic Ni(OH)2 modified electrodes⎯ electrooxidation of borohydride as probe reaction. Bulletin of Materials Science, 37 (3). pp. 635-641. ISSN 0250-4707

Hari Gopi, K. and Gouse peera, S. and Bhat, S.D. and Sridhar, P. and Pitchumani, S. (2014) 3-Methyltrimethylammonium poly(2,6-dimethyl-1,4-phenylene oxide) based anion exchange membrane for alkaline polymer electrolyte fuel cells. Bulletin of Materials Science, 37 (4). pp. 877-881. ISSN 0250-4707

Taha-Tijerina, J.J. and Narayanan, T.N. and Tiwary, C.S. and Lozano, K. and Chipara, M. and Ajayan, P.M. (2014) Nanodiamond-Based Thermal Fluids. ACS Applied Materials and Interfaces, 6. pp. 4778-4785. ISSN 1944-8244

Jaison, M.J. and Narayanan, T.N. and Vijayamohanan, K.Pillai (2014) Electric field induced transformation of carbon nanotube to graphene nanoribbons using Nafion as a solid polymer electrolyte. Applied Physics Letters, 104. pp. 153111-153112. ISSN 0003-6951

Joy, L.K. and Sooraj, V. and Sajeev, U.S. and Swapna, S.Nair and Narayanan, T.N. and Sethulakshmi, N. and Ajayan, P.M. and Anantharaman, M.R. (2014) Large enhanced dielectric permittivity in polyaniline passivated core-shell nano magnetic iron oxide by plasma polymerization. Applied Physics Letters, 104. pp. 121603-121611. ISSN 0003-6951

Boopathi, S. and Narayanan, T.N. and Senthilkumar, S. (2014) Improved heterogeneous electron transfer kinetics of fluorinated graphene derivatives. Nanoscale, 6. pp. 10140-10146. ISSN 2040-3364

Narayanan, T.N. and Chiranjeevi, S. and Vusa, R. and Alwarappan, S. (2014) Selective and efficient electrochemical biosensing of ultrathin molybdenum disulfide sheets. Nanotechnology, 25. p. 33572. ISSN 0957-4484

Soumya, V. and Tiwary, C.S. and Silva Autreto, P. and Taha-Tijerina, J. and Ozden, S. and Chipara, A.C. and Vajtai, R. and Galvao, D.S. and Narayanan, T.N. and Ajayan, P.M. (2014) Low-density three-dimensional foam using self-reinforced hybrid two-dimensional atomic layers. Nature Communications, 5. pp. 4541-4550. ISSN 2041-1723

Dhandapani, P. and Muralikannan, M. and Anandkumar, B. and Maruthamuthu, S. and Manoharan, SP. (2014) Electrochemistry of calcium precipitating bacteria in orthodontic wire. Oral Science International, 11. pp. 22-29. ISSN 1348-8643

Shanmugasigamani , S. and Thangavelu, P.R. and Srinivasan, K.N. and Selvam, M. (2013) Zn-Ni Alloy Deposit for Cadmium Replacement Applications. INTERNATIONAL JOURNAL OF ENGINEERING SCIENCES & RESEARCH TECHNOLOGY, 2 (10). pp. 3041-3046. ISSN ISSN: 2277-9655

Shanmugasigamani, S. and Thangavelu , PR. and Srinivasan, K.N. and Selvam, M. (2013) Electrodeposition of Zinc From Low Temperature Molten Salt Electrolyte:Part I-Imidazole And Zinc-Chloride Electrolyte. International Journal of Scientific Engineering and Technology, 2 (9). pp. 811-816. ISSN ISSN : 2277-1581

Shanmugasigamani, S. and Selvam, M. (2013) Surface Morphology and Microstructure of Zinc Deposit From Imidazole with Zinc Chloride Low Temperature Molten Salt Electrolyte in The Presence of Aluminium Chloride. International Journal of Engineering Research, 2 (3). pp. 187-193. ISSN 2319-6890

Debgupta, J. and Vijayamohanan, K.Pillai (2013) Thiolated Graphene – a New Platform for anchoring CdSe Quantum Dots for hybrid heterostructures. Nanoscale, 5 (9). pp. 3615-3619. ISSN 2040-3364

Angulakshmi, N. and Nahm, K.S. and Nair, J.R. and Gerbaldi, C. and Bongiovanni, R. (2013) Cycling profile of MgAl2O4-incorporated composite electrolytes composed of PEO and LiPF6 for lithium polymer batteries. Electrochimica Acta, 90. pp. 179-185. ISSN 0013-4686

Munaiah, Y. and Gnana Sundara Raj, B. and Premkumar, T. and Ragupathy, P. (2013) Facile synthesis of hollow sphere amorphous MnO2: the formation mechanism, morphology and effect of a bivalent cation-containing electrolyte on its supercapacitive behavior. Journal of Materials Chemistry A (1). pp. 4300-4306.

Saravanan, M. and Sennu, P. and Ganesan, M. and Ambalavanan, S. (2013) Multi-Walled Carbon Nanotubes Percolation Network Enhanced the Performance of Negative Electrode for Lead-Acid Battery. Journal of The Electrochemical Society, 160 (1). A70-A76. (In Press)

Subramanian, K. and Suresh, S. and Asokan, K. (2013) Electrosynthesis of Solid Tetra Ethyl Ammonium Tribromide (TEATB) in a Membrane Electrolyzer. Chemical Engineering Communications, 200 (9). pp. 1210-1219. ISSN 1563-5201

Vijayakumar, J. and Mohan, S. (2013) Effect of benzyl alcohol and thiourea on electrodeposition of cadmium: electrochemical impedance spectroscopy study. Transactions of the Institute of Metal Finishing, 91 (3). pp. 165-168. ISSN 0020-2967

Kundu, S. and Jayachandran, M. (2013) Shape-selective synthesis of non-micellar cobalt oxide (CoO) nanomaterials by microwave irradiations. Journal of Nanoparticles Research, 15. pp. 1543-1555.

Kundu, S. and Mukadam, M.D. and Yusuf, S.M. and Jayachandran, M. (2013) Formation of shape-selective magnetic cobalt oxide nanowires: environmental application in catalysis studies. CrystEngComm, 15. pp. 482-497.

Kundu, S. and Nelson, A.J. and McCall, S.K. and Buuren, T.V. and Liang, H. (2013) Shape-influenced magnetic properties of CoO nanoparticles. Journal of Nanoparticles Research, 15. p. 1587.

Kundu, S. (2013) A new route for the formation of Au nanowires and application of shape-selective Au nanoparticles in SERS studies. Journal of Materials Chemistry C. pp. 831-842. ISSN 0959-9428

Maheswari, S. and Sridhar, P. and Pitchumani, S. (2013) Pd–TiO2/C as a methanol tolerant catalyst for oxygen reduction reaction in alkaline medium. Electrochemistry Communications, 26. pp. 97-100. ISSN 1388-2481

Vijayakumar, R. and Ramkumar, T. and Maheswari, S. and Sridhar, P. and Pitchumani, S. (2013) Current and clamping pressure distribution studies on the scale up issues in direct methanol fuel cells. Electrochimica Acta, 90. pp. 274-282. ISSN 0013-4686

Saravanan, KR. and Sathyamoorthi, S. and Velayutham, D. and Suryanarayanan, V. (2013) Electrodeposition of nickel on boron-doped diamond from an air-stable methyl sulphate anion based ionic liquid. Electrochimica Acta, 98. pp. 88-93. ISSN 0013-4686

Venkatkarthik, R. and Elamathi, S. and Sangeetha, D. and Balaji, R. and Sureshkannan, B. and Vasudevan, S. and Davidson, D.J. and Sozhan, G. and Ravichandran, S. (2013) Studies on polymer modifiedmetal oxide anode for oxygen evolution reaction in saline water. Journal of Electroanalytical Chemistry, 697. pp. 1-4. ISSN 1572-6657

Meenaksh, S. and Sahu, A.K. and Bhat, S.D. and Sridhar, P. and Pitchumani, S. and Shukla, A.K. (2013) Mesostructured-aluminosilicate-Nafion hybrid membranes for direct methanol fuel cells. Electrochimica Acta, 89. pp. 35-44. ISSN 0013-4686

Lee, K.M. and Chiu, W.H. and Suryanarayanan, V. and Wu, C.G. (2013) Enhanced efficiency of bifacial and back-illuminated Ti foil based flexible dye-sensitized solar cells by decoration of mesoporous SiO2 layer on TiO2 anode. Journal of Power Sources, 232. pp. 1-6. ISSN 0378-7753

Balamurugan, J. and Thangamuthu, R. and Pandurangan, A. and Jayachandran, M. (2013) Facile fabrication of dye-sensitized solar cells utilizing carbon nanotubes grown over 2D hexagonal bimetallic ordered mesoporous materials. Journal of Power Sources, 225. pp. 364-373. ISSN 0378-7753

Nishanth, K.G. and Sridhar, P. and Pitchumani, S. (2013) Carbon-supported Pt encapsulated Pd nanostructure as methanol-tolerant oxygen reduction electro-catalyst. International Journal of Hydrogen Energy , 38. pp. 612-619. ISSN 0360-3199

Angulakshmi, N. and Thomas, S. and Nair, J.R. and Bongiovanni, R. and Gerbaldi, C. and Stephan, A.M. (2013) Cycling profile of innovative nanochitin-incorporated poly (ethylene oxide) based electrolytes for lithium batteries. Journal of Power Sources, 228. pp. 294-299. ISSN 0378-7753

Balamurugan, J. and Pandurangan, A. and Thangamuthu, R. and Senthilkumar, S. (2013) Effective Synthesis of Well-Graphitized Carbon Nanotubes on Bimetallic SBA-15 Template for Use as Counter Electrode in Dye-Sensitized Solar Cells. Industrial & Engineering Chemistry Research, 52. pp. 384-393.

Balamurugan, J. and Thangamuthu, R. and Pandurangan, A. (2013) Effective synthesis of carbon nanotubes of high purity over Cr–Ni–SBA-15 and its application in high performance dye-sensitized solar cells. Royal Society of Chemistry Advances, 3. p. 4321.

Balamurugan, J. and Thangamuthu, R. and Pandurangan, A. (2013) Growth of carbon nanotubes over transition metal loaded on Co-SBA-15 and its application for high performance dye-sensitized solar cells. Journal of Materials Chemistry A, 1. p. 5070. ISSN 0959-9428

Balamurugan, J. and Pandurangan, A. and Thangamuthu, R. (2013) Growth of well graphitized MWCNTs over novel 3D cubic bimetallic KIT-6 towards the development of an efficient counter electrode for dye-sensitized solar cells. Organic Electronics, 14. pp. 1833-1843.

Sivasankar, A. and Arul Xavier Stango, S. and Vedalakshmi, R. (2013) Quantitative estimation on delaying of onset of corrosion of rebar in surface treated concrete using sealers. Ain Shams Engineering Journal. (In Press)

Hemen, Kalita and Harikrishnan, V and Dhanraj, B. Shinde and Vijayamohanan, K.Pillai and Aslam, M (2013) Hysteresis and charge trapping in graphene quantum dots. Applied Physics Letters, 102 (14). p. 3104. ISSN 0003-6951 (Submitted)

Balamurugan, J. and Senthilkumar, S.M. and Thangamuthu, R. and Pandurangan, A. (2013) Facile and controlled growth of SWCNT on well-dispersed Ni-SBA-15 for an efficient electro-catalytic oxidation of ascorbic acid, dopamine and uric acid. Journal of Molecular Catalysis, 372. pp. 13-22. ISSN 1381-1169

Siva, T. and Kamaraj, K. and Karpakam, V. and Sathiyanarayanan, S. (2013) Soft template synthesis of poly(o-phenylenediamine) nanotubes and its application in self healing coatings. Progress in Organic Coatings, 76. pp. 581-588. ISSN 0300-9440

Saravanan, KR. and Selvamani, V. and Kulangiappar, K. and Velayutham, D. and Suryanarayanan, V. (2013) Regioselective anodic α-methoxylation of 2-oxazolidinone on boron doped diamond in acidic methanol medium. Electrochemistry Communications, 28. pp. 31-33. ISSN 1388-2481

Priyanka, H.M. and Nithya, C. and Shilpa, J. and Mathur, R.B. (2013) Development of free standing anodes of high aspect ratio carbon materials for rechargeable Li-ion batteries. Electrochimica Acta, 92. pp. 55-63. ISSN 0013-4686

Bhuvaneswari, A. and Navanietha Krishnaraj, R. and Sheela, B. (2013) Metamorphosis of pathogen to electrigen at the electrode/electrolyte interface: Direct electron transfer of Staphylococcus aureus leading to superior electrocatalytic activity. Electrochemistry Communications, 34. pp. 25-28. ISSN 1388-2481

Nithya, V.D. and Kalaiselvan, R. and Kalpana, D. and Vasylechko, L. (2013) Synthesis of Bi2WO6 nanoparticles and its electrochemical properties in different electrolytes for pseudocapacitor electrodes. Electrochimica Acta, 109. pp. 720-731. ISSN 0013-4686

Bhuvaneswari, D. and Gangulibabu, . and Kalaiselvi, N. (2013) Effect of surface modifiers in improving the electrochemical behavior of LiNi0.4Mn0.4Co0.2O2 cathode. Electrochimica Acta, 109. pp. 684-693. ISSN 0013-4686

Gangulibabu, . and Kalaiselvi, N. and Daniella, Meyrick and Minakshi, M. (2013) Carbonate anion controlled growth of LiCoPO4/C nanorods and its improved electrochemical behavior. Electrochimica Acta, 101. pp. 18-26. ISSN 0013-4686

Lee, Chuan-Pei and Peng, Jia-De and Velayutham, D. and Chang, Jeffrey and Chen, Ping-Wei and Suryanarayanan, V. and Ho, Kuo-Chuan (2013) Trialkylsulfonium and tetraalkylammonium cations-based ionicliquid electrolytes for quasi-solid-state dye-sensitized solar cells. Electrochimica Acta, 114. pp. 303-308. ISSN 0013-4686

Sivasankar, A. and Arul Xavier Stango, S. and Vedalakshmi, R. (2013) Quantitative estimation on delaying of onset of corrosion of rebar in surface treated concrete using sealers. Ain Shams Engineering Journal, 4. pp. 615-623.

Karthikeyan, S. and Jeeva, P.A. and Arivazhagan, N. and Umasankar, V. and Srinivasan, K.N. and Paramasivam, M. (2013) Wear, hardness and corrosion resistance characteristics of tungsten sulfide incorporated electroless Ni-P coatings. Procedia Engineering, 64. pp. 720-726.

Shailendra , K.Jha and Naveen Kumar, C. and Pavul Raj, R. and Niki, S.Jha and Mohan, S. (2013) Synthesis of 3D porous CeO2/reduced graphene oxide xerogel composite and low level detection of H2O2. Electrochimica Acta. ISSN 0013-4686 (Unpublished)

Gouse peera, S. and Tintula, K.K. and Sahu, A.K. and Shanmugam, S. and Sridhar, P. and Pitchumani, S. (2013) Catalytic activity of Pt anchored onto graphite nanofiber-poly(3,4-ethylenedioxythiophene) composite toward oxygen reductionreaction in polymer electrolyte fuel cells. Electrochimica Acta, 108. pp. 95-103. ISSN 0013-4686

Subramanian, G. and Palanichamy, S. (2013) Influence of Fouling Assemblage on the Corrosion Behaviour of Mild Steel in the Coastal Waters of The Gulf of Mannar, India. Journal of Marine Sciences and Application, 12. pp. 500-509.

Shanmugasigamani, S. and Thangavelu, P.R. and Srinivasan, K.N. and Selvam, M. (2013) Alternate Zinc - Nickel alloy coating for hazardous Cadmium. International Journal of Advanced Research, 1 (10). pp. 495-509. ISSN 2320 5407

Navanietha Krishnaraj, R. and Karthikeyan , R. and Sheela, B. and Saravanan , C. and Parimal, P. (2013) Functionalization of electrochemically deposited chitosan films with alginate and Prussian blue for enhanced performance of microbial fuel cells. Electrochimica Acta, 112. pp. 465-472. ISSN 0013-4686

Sathiya, M. and Ramesha, K. and Rousse, G. and Foix, D. and Gonbeau, D. and Guruprakash, K. and Prakash, A.S. and Doubletef, M.L. and Tarascon, J.M. (2013) Li4NiTeO6 as a positive electrode for Li-ion batteries. Chemical Communications, 49. pp. 11376-11378. ISSN 1359-7345

Sathiya, M. and Ramesha, K. and Rousse, G. and Foix, D. and Gonbeau, D. and Prakash , A.S. and Doublet, M.L. and Hemalatha, K. and Tarascon, J.M. (2013) High Performance Li2Ru1−yMnyO3 (0.2 ≤ y ≤ 0.8) Cathode Materials for Rechargeable Lithium-Ion Batteries: Their Understanding. Chemistry of Materials, 25. pp. 1121-1131. ISSN 0897-4756

Manikandan, P. and Periasamy, P. and Jagannathan, R. (2013) Sol–gel synthesis and impedance characteristics of networked nanocrystalline olivine cathode for Li-ion full cells. Journal of Materials Chemistry A, 1. pp. 15397-15405. ISSN 0959-9428

Sridharan, D. and Karthikeyan, C. and Maruthan, K. and Manoharan, SP. and Palaniswamy, N. (2013) Impact of Mixed Inhibitor on Electrochemical Behavior of Inland Water Biofilm Formed on 316L Stainless Steel. Industrial and Engineering Chemistry Research, 52. pp. 16175-16181. ISSN 0888-5885

Meenakshi, S. and Bhat, S.D. and Sahu, AK. and Sridharan, D. and Pitchumani, S. (2013) Modified Sulfonated Poly(ether ether ketone) Based MixedMatrixMembranes for DirectMethanol Fuel Cells. Fuel Cells, 13 (5). pp. 851-861. ISSN 1615-6846

Priya, S. and Kaviyarasan, T. and Palaniappan, A. and Sheela, B. (2013) Nitric Oxide Releasing Photoresponsive Nanohybrids As Excellent Therapeutic Agent for Cervical Cancer Cell Lines. ACS Applied Materials and Interfaces, 5. pp. 8263-8266. ISSN 1944-8244

Selva Chandrasekaran, S. and Murugan, P. and Saravanan, P. and Kamat, S.V. (2013) Surface termination dependent structural and magnetic properties of (0001) SmCo5 slabs. Physica Status Solidi B, 250 (9). pp. 1883-1887. ISSN 0370-1972

Saravanan, G. and Mohan, S. (2013) Nucleation of copper on mild steel in copper chloride (CuCl2�2H2O)–1-ethyl-3-methylimidazolium chloride [EMIM]Cl–ethylene glycol (EG) ionic liquid. New Journal of Chemistry, 37. pp. 2564-2567. ISSN 1144-0546

Tintula, K.K. and jalajakshi, A. and Sahu, A.K. and Pitchumani, S. and Sridhar, P. and Shukla, A.K. (2013) Durability of Pt/C and Pt/MC-PEDOT Catalysts under Simulated Start-Stop Cycles in Polymer Electrolyte Fuel Cells. Fuel Cells, 13 (2). pp. 158-166. ISSN 1615-6846

Ilayaraja, N. and Prabhu, N. and Lakshminarasimhan, N. and Murugan, P. and Jeyakumar, D. (2013) Au–Pt graded nano-alloy formation and its manifestation in small organics oxidation reaction. Journal of Materials Chemistry A, 1. pp. 4048-4056. ISSN 0959-9428

Eashwar, M. and Sathishkumar, , and Ravisgankar, R. and Subramanian, G. (2013) Sunlight-enhanced calcareous deposition on cathodic stainless steel in natural seawater. Biofouling, 29 (2). pp. 185-193. ISSN 0892-7014

Sathiya, M. and Rousse, G. and Ramesha, K. and Laisa, H. and Vezin, H. and Sougrati, M.T. and Doublet, M.L. and Foix, D. and Gonbeau, D. and Walker, W. and Praskash , A.S. and Ben Hassine, M. and Dupont, L. and Tarascon, J.M. (2013) Reversible anionic redox chemistry in high-capacity layered-oxide electrodes. Nature Materials, 12. pp. 827-835. ISSN 1476-1122

Sekar, R. and Sobha , J. (2012) Effect of sulphonic acids on electrodeposition of nickel and its structural and corrosion behaviour. Transactions of the Institute of Metal Finishing. ISSN 0020-2967 (In Press)

Srinivasan, K.N. and Thangavelu, P.R. (2012) Electroless deposition of composite coatings containing kaolin nanoparticles. Transactions of the Institute of Metal Finishing, 90 (2). pp. 105-112. ISSN 0020-2967

Saravanan, M. and Ganesan, M. and Ambalavanan, S. (2012) A Modified Lead-Acid Negative Electrode for High-Rate Partial-State-of-Charge Applications. Journal of the Electrochemical Society, 159 (4). A452-A458. ISSN 0013-4651

Ananthakumar, R. and Subramanian, B. and Kobayashi, A. and Jayachandran, M. (2012) Electrochemical corrosion and materials properties of reactively sputtered TiN/TiAlN multilayer coatings. Ceramic International, 38. pp. 477-485. ISSN 0272-8842

Mutharasu, A. and Ganesan, V. (2012) Electrochemical characterization of Self-assembled monolayers (SAMs) of silanes on indium tin oxide (ITO) electrodes – Tuning electron transfer behaviour across electrode–electrolyte interface. Journal of Colloid and Interface Science, 374. pp. 241-249. ISSN 0021-9797

Gopukumar, S. and Nithya, C. and Maheswari, S. and Ravikumar, R. and Thirunakaran, R. and Sivashanmugam, A. and Dhawan, S.K. and Mathur, R.B. (2012) Solar powered lithium-ion battery incorporating high performing electrode materials. RSC Advances, 2. pp. 11574-11577. ISSN ESSN 2046-2069

Vasudevan, S. (2012) Effects of Alternating Current (AC) and Direct Current (DC) in Electrocoagulation Process for the Removal of iron from Water. The Canadian Journal of Chemical Engineering, 90. pp. 1160-1169. ISSN 0008-4034

Kundu, S. and Sutradhar, N. and Thangamuthu, R. and Subramanian, B. and Panda, A.B. and Jayachandran, M. (2012) Fabrication of catalytically active nanocrystalline samarium (Sm)-doped cerium oxide (CeO2) thin films using electron beam evaporation. Journal of Nanoparticles Research, 14. p. 1040.

Zhou, Y. and Kong, Y. and Kundu, S. and Cirillo, J.D. and Liang, H. (2012) Antibacterial activities of gold and silver nanoparticles against Escherichia coli and bacillus Calmette-Guérin. Journal of Nanobiotechnology, 10 (19). pp. 1-9.

Mohan, S. and Saravanan, G. and Bund, A. (2012) Role of magnetic forces in pulse electrochemical deposition of Ni nanoAl2O3 composites. Electrochimica Acta, 64. pp. 94-99. ISSN 0013-4686

Nathiya, K. and Bhuvaneswari, D. and Gangulibabu, . and Kalaiselvi, N. (2012) Combustion synthesized nanocrystalline Li3V2(PO4)3/C cathode for lithium-ion batteries. Materials Research Bulletin, 47. pp. 4300-4304. ISSN 0025-5408

Senthilkumar, R. and Senthilkumar, S. and Anbukulandainathan, M. (2012) Highly selective electrochemical reduction of carbon dioxide using Cu based metal organic framework as an electrocatalyst. Electrochemistry Communications, 25. pp. 70-73. ISSN 1388-2481

Harish, S. and Baranton, S. and Coutanceau, C. and Joseph, J. (2012) Microwave assisted polyol method for the preparation of Pt/C, Ru/C and PtRu/C nanoparticles and its application in electrooxidation of methanol. Journal of Power Sources, 214. pp. 33-39. ISSN 0378-7753

Bhavanidevi, L. and Sheela, B. and Mandal, A.B. (2012) Highly sensitive detection of proteins using voltammetric assay in the presence of silver nanostructures. Journal of Electroanalytical Chemistry, 665. pp. 20-25. ISSN 1572-6657

Palraj, S. and Selvaraj, M. and Vidhya, M. and Rajagopal, G. (2012) Synthesis and characterization of epoxy–silicone–polythiophene interpenetrating polymer network for corrosion protection of steel. Progress in Organic Coatings, 75. pp. 356-363. ISSN 0021-8995

Saravanan, KR. and Satyamoorthi, S. and Velayutham, D. and Suryanarayanan, V. (2012) Voltammetric investigations on the relative deactivation of boron-doped diamond, glassy carbon and platinum electrodes during the anodic oxidation of substituted phenols in room temperature ionic liquids. Electrochimica Acta, 69. pp. 71-78. ISSN 0013-4686

Jeyabharathi, C. and Venkateshkumar, P. and Sankararao, M. and Mathiyarasu, J. and Phani, K.L.N. (2012) Nitrogen-doped carbon black as methanol tolerant electrocatalyst for oxygen reduction reaction in direct methanol fuel cells. Electrochimica Acta, 74. pp. 171-175. ISSN 0013-4686

Vijayasankar, K. and Senthil, S.T. and Berchmans, L.J. and Sanjeeviraja, C. and Kalaiselvan, R. (2012) Effect of reaction time on the synthesis and electrochemical properties of Mn3O4 nanoparticles by microwave assisted reflux method. Applied Surface Science, 259. pp. 624-630. ISSN 0169-4332

Sethupathi, N. and Thirunavukkarasu, P. and Vidhya, V.S. and Thangamuthu, R. and Kiruthika, G.V.M. and Perumal, K. and Bajaj, H.C. and Jayachandran, M. (2012) Deposition and optoelectronic properties of ITO (In2O3:Sn) thin films by Jet nebulizer spray (JNS) pyrolysis technique. Journal of Materials Science: Materials Electronics, 23. pp. 1087-1093.

Sivasakthi, P. and Sathaiyan, N. (2012) Cobalt Recovery from Waste Catalysts (Petroleum Refining Industry from Gujarat). Open Journal of Metal, 2. pp. 24-30.

Rajasekaran, N. and Mohan, S. (2012) Giant Magnetoresistance in Electrodeposited Films: Current Status and the Influence of Parameters. Critical Reviews in Solid State and Materials Sciences, 37. pp. 158-180.

Sathiya, M. and Hemalatha, K. and Ramesha, K. and Tarascon, J.M. and Prakash, A.S. (2012) Synthesis, Structure, and Electrochemical Properties of the Layered Sodium Insertion Cathode Material: NaNi1/3Mn1/3Co1/3O2. Chemistry of Materials, 24. pp. 1846-1853. ISSN 0897-4756

Maheswari, S. and Sridhar, P. and Pitchumani, S. (2012) Pd-RuSe/C asORR Specific Catalyst in Alkaline Solution ContainingMethanol. Fuel Cells, 12 (6). pp. 963-970. ISSN 1615-6846

Vasudevan, S. (2012) Studies Relating to Cathodic Reduction of Hypochlorite in Neutral Chloride Solutions – Used in Chlorate Processes. Research Journal of Chemical Sciences, 2 (10). pp. 55-59. ISSN 2231-606X

Subramanian, B. and Ananthakumar, R. and Akira, K. and Jayachandran, M. (2012) Nanocomposite Ti–Si–N Coatings Deposited by Reactive dc Magnetron Sputtering for Biomedical Applications. Journal of the American Ceramic Society, 95 (9). pp. 2746-2752. ISSN 0002-7820

Nithya, C. and Thirunakaran, R. and Sivashanmugam, A. and Gopukumar, S. (2012) High-Performing LiMgxCuyCo1−x−yO2 Cathode Material for Lithium Rechargeable Batteries. ACS Applied Materials and Interfaces, 4. pp. 4040-4046. ISSN 1944-8244

Nathiya, K. and Bhuvaneswari, D. and Gangulibabu, . and Nirmala, D. and Kalaiselvi, N. (2012) Li3MxV22x(PO4)3/C (M=Fe, Co) composite cathodes with extended solubility limit and improved electrochemical behavior. RSC Advances, 2. pp. 6885-6889. ISSN ESSN 2046-2069

Adhikari, A. and Radhakrishnan, S. and Vijayan, M. (2012) Effect of the Surface Roughness of Conducting Polypyrrole Thin-Film Electrodes on the Electrocatalytic Reduction of Nitrobenzene. Journal of Applied Polymer Science, 125. pp. 1875-1881. ISSN 0021-8995

Vasudevan, S. and Lakshmi, J. (2012) Electrochemical Removal of Boron from Water: Adsorption and Thermodynamic Studies. The Canadian Journal of Chemical Engineering, 90. pp. 1017-1026. ISSN 0008-4034

Subramanian, B. and Prabakaran, K. and Jayachandran, M. (2012) Influence of nitrogen flow rates on materials properties of CrNx films grown by reactive magnetron sputtering. Bulletin of Materials Science, 35 (4). pp. 505-511. ISSN 0250-4707

Karthikeyan, R. and Uskaikar, H.P. and Sheela, B. (2012) Electrochemically Prepared Manganese Oxide as a Cathode Material for a Microbial Fuel Cell. Analytical Letters, 45. pp. 1645-1657. ISSN 0003-2719

Priya, S. and Kaviyarasan, T. and Sheela, B. (2012) Naked eye detection of nitric oxide release from nitrosothiols aided by gold nanoparticles. Analyst, 137 (1541). pp. 1541-1543. ISSN 0003-2654

Sheela, B. and Touma, B.ISSA. and Pritam, Singh (2012) Determination of inorganic phosphate by electroanalytical methods: A review. Analytica Chimica Acta, 729. pp. 7-20. ISSN 0003-2670

Kannan, R. and Ranjith, R. and Nileshkumar, P. and Chaudhari, H.D. and Ulhas, K.K. and Sreekumar, K. and Vijayamohanan, K.Pillai (2011) Application of Functionalized CNT–Polymer Composite electrolytes for Enhanced Charge Storage in “All Solid-State Supercapacitors”. Journal of Nano Energy Power Research, 1 (1). pp. 42-48.

Anwar, S. and Sudalaimuthu, K. and Ganesh, V. and Lakshminarasimhan, N. (2011) A Comparative Study of Electrochemical Capacitive Behavior of NiFe2O4 Synthesized by Different Routes. J Electrochem Soc, - (-).

Ramaiyan, K. and Ranjith, V. and Nileshkumar, P. and Harshal, D.C. and Ulhas, K.K. and Sreekumar, K. and Vijayamohanan, K.Pillai (2011) Application of Functionalized CNT–Polymer Composite Electrolytes for Enhanced Charge Storage in “All Solid-State Supercapacitors”. Journal of Nano Energy and Power Research, 1. pp. 1-7.

Vishal, M.D. and Sreekuttan, M.U. and Husain, N.K. and Vijayamohanan, K.Pillai and Sreekumar, K. (2011) Ex-situ dispersion of core–shell nanoparticles of Cu–Pt on an in situ modified carbon surface and their enhanced electrocatalytic activities. Chemical Communications. ISSN 1359-7345 (In Press)

Ramaiyan, K. and Unni, B. and Sreekumar, K. and Vijayamohanan, K.Pillai (2011) Enhanced electrocatalytic performance of functionalized carbon nanotube electrodes for oxygen reduction in proton exchange membrane fuel cells. Physical Chemistry Chemical Physics, 13 (21). pp. 10312-10317. ISSN 1463-9076

Bhaskar, R.S. and Beena, K.B. and Vijayamohanan, K.Pillai (2011) Enhanced electrocatalytic performance of interconnected Rh nano-chains towards formic acid oxidation. Energy & Environmental Science, 4 (3). pp. 1029-1036. ISSN 1754-5692

Ramaiyan, K. and Husain, N.K. and Harshal, D.C. and Ulhas, K.K. and Sreekumar, K. and Vijayamohanan, K.Pillai (2011) Improved performance of phosphonated carbon nanotube–polybenzimidazole composite membranes in proton exchange membrane fuel cells. Journal of Materials Chemistry. ISSN 0959-9428

Joyashish, D. and Bhalchandra, A. K. and Vijayamohanan, K.Pillai (2011) Competitive wetting of acetonitrile and dichloromethane in comparison to that of water on functionalized carbon nanotube surfaces. Physical Chemistry Chemical Physics, 13 (32). pp. 14668-14674. ISSN 1463-9076

Ranjith, V. and Vijayamohanan, K.Pillai and Sreekumar, K. (2011) Hydrous RuO2–carbon nanofiber electrodes with high mass and electrode-specific capacitance for efficient energy storage. Nanoscale. ISSN 2040-3364 (In Press)

Dhanraj, B.S. and Joyashish, D. and Ajay, K. and Mohammednazar, A. and Vijayamohanan, K.Pillai (2011) Electrochemical Unzipping of Multi-walled Carbon Nanotubes for Facile Synthesis of High-Quality Graphene Nanoribbons. Journal of the American Chemical Society, 133 (12). pp. 4168-4171.

Sushma, K. and Bharmana, M. and Anal, K.G. and Vijayamohanan, K.Pillai and Gupta, S.S. (2011) Functionalization of SBA-15 Mesoporous Materials using Thiol-Ene“Click” Michael Addition Reaction. Journal of Physical Chemistry C. 7.78. ISSN 1932-7447

Kottakkat, T. and Sahu, A.K. and Bhat, S.D. and Pitchumani, S. and Sridhar, P. (2011) Catalytic activity of dendrimer encapsulated Pt nanoparticles anchored onto carbon towards oxygen reduction reaction in polymer electrolyte fuel cells. Applied Catalysis B: Environmental, 110. pp. 178-185. ISSN 0926-3373

Parande, A.K. and Rameshbabu, B. and Pandi, K. and Karthikeyan, M.S. and Palaniswamy, N. (2011) Environmental effects on concrete using ordinary and pozzolana portland cement. Construction and Building Materials, 25 (01). pp. 288-297. ISSN 0950-0618

Vasudevan, S. and Lakshmi, J. and Sozhan, G. (2011) Studies on the Al–Zn–In-alloy as anode material for the removal of chromium from drinking water in electrocoagulation process. Desalination, 275. pp. 260-268. ISSN 0011-9164

Boopathi, S. and Senthilkumar, S. and Joseph, J. and Phani, K.L.N. (2011) Selective deposition of zinc hexacyanoferrate on the metal impurity sites of a SWCNT/glassy carbon electrode. Electrochemistry Communications, 13 (03). pp. 294-297. ISSN 1388-2481

Thirunakaran, R. and Ravikumar, R. and Vanitha, S. and Gopukumar, S. and Sivashanmugam, A. (2011) Glutamic acid-assisted sol–gel synthesis of multi-doped spinel lithium manganate as cathode materials for lithium rechargeable batteries. Electrochimica Acta, 58 (01). pp. 348-358. ISSN 0013-4686

Firozbabu, K. and Sivasubramanian, R. and Noel, M. and Anbukulandainathan, M. (2011) A homogeneous redox catalytic process for the paired synthesis of l-cysteine and l-cysteic acid from l-cystine. Electrochimica Acta, 56 (27). pp. 9797-9801. ISSN 0013-4686

Karpakam, V. and Kamaraj, K. and Sathiyanarayanan, S. and Venkatachari, G. and Ramu, S. (2011) Electrosynthesis of polyaniline–molybdate coating on steel and its corrosion protection performance. Electrochimica Acta, 56 (05). pp. 2165-2173. ISSN 0013-4686

Kamaraj, K. and Karpakam, V. and Sathiyanarayanan, S. and Azim, S.S. and Venkatachari, G. (2011) Synthesis of tungstate doped polyaniline and its usefulness in corrosion protective coatings. Electrochimica Acta, 56 (25). pp. 9262-9268. ISSN 0013-4686

Sathyamoorthi, S. and Velayutham, D. and Suryanarayanan, V. and Noel, M. (2011) Voltammetric investigations on the transition between dissolution, passivation and deposition characteristics of Ni, Cu and their alloys in fluorine based ionic liquid. Electrochimica Acta, 56 (20). pp. 7012-7021. ISSN 0013-4686

Ganesh, V. and Lathamaheswari, D. and Sheela, B. (2011) Electrochemical behaviour of metal hexacyanoferrate converted to metal hydroxide films immobilized on indium tin oxide electrodes—Catalytic ability towards alcohol oxidation in alkaline medium. Electrochimica Acta, 56 (03). pp. 1197-1207. ISSN 0013-4686

Harish, S. and Joseph, J. and Phani, K.L.N. (2011) Interaction between gold (III) chloride and potassium hexacyanoferrate (II/III)—Does it lead to gold analogue of prussian blue? Electrochimica Acta, 56 (16). pp. 5717-5721. ISSN 0013-4686

Venkatraman, M.S. and Cole, I.S. and Bosco, E. (2011) Model for corrosion of metals covered with thin electrolyte layers:pseudo-steady state diffusion of oxygen. Electrochimica Acta, 56 (20). pp. 7171-7179. ISSN 0013-4686

Radhakrishnan, S. and Jagannathan, R. (2011) Charge growth, dispersion in europium manganite (EuMnO3−ı) ceramics revealed using opto-impedance probe. Journal of Alloys and Compounds, 509 (020). pp. 6009-6014. ISSN 0925-8388

Hwang, S.W. and Umar, A. and Kim, S.H. and Al-Sayari, S.A. and Abaker, M. and Al-Hajry, A. and Stephan, A.M. (2011) Low-temperature growth of well-crystalline Co3O4 hexagonal nanodisks as anode material for lithium-ion batteries. Electrochimica Acta, 56 (24). pp. 8534-8538. ISSN 0013-4686

Vidhya, V.S. and Murali, K.R. and Subramanian, B. and Manisankar, P. and Sanjeeviraja, C. and Jayachandran, M. (2011) Photoluminescent studies on porous silicon/tin oxide heterostructures. Journal of Alloys and Compounds, 509 (006). pp. 2842-2845. ISSN 0925-8388

Vijayakumar, J. and Mohan, S. and Yadav, S.S. (2011) Effects of primary dicarboxylic acids on microstructure and mechanical properties of sub-microcrystalline Ni–Co alloys. Journal of Alloys and Compounds, 509 (040). pp. 9692-9695. ISSN 0925-8388

Khomane, R.B. (2011) Microemulsion-mediated sol–gel synthesis of mesoporous rutile TiO2 nanoneedles and its performance as anode material for Li-ion batteries. Journal of Colloid and Interface Science, 356 (001). pp. 369-372. ISSN 0021-9797

Nareshkumar, T. and Ananthi, A. and Mathiyarasu, J. and Joseph, J. and Phani, K.L.N. and Yegnaraman, V. (2011) Enzymeless creatinine estimation using poly(3,4-ethylenedioxythiophene)-beta-cyclodextrin. Journal of Electroanalytical Chemistry, 661 (002). pp. 303-308. ISSN 1572-6657

Kumar, A.V.N. and Harish, S. and Joseph, J. and Phani, K.L.N. (2011) Nix–Fe(1-x)Fe(CN)6 hybrid thin films electrodeposited on glassy carbon: Effect of tuning of redox potentials on the electrocatalysis of hydrogen peroxide. Journal of Electroanalytical Chemistry , 659 (002). pp. 128-133. ISSN 1572-6657

Narmadha, M. and Noel, M. and Suryanarayanan, V. (2011) Relative deactivation of boron-doped diamond (BDD) and glassy carbon (GC) electrodes in different electrolyte media containing substituted phenols – Voltammetric and surface morphologic studies. Journal of Electroanalytical Chemistry , 655 (002). pp. 103-110. ISSN 1572-6657

Manivel, A. and Velayutham, D. and Noel, M. (2011) Electrochemical behaviour of tetra-n-butylammonium nonaflate as an ionic liquid and as a supporting electrolyte in aprotic solvents: a comparative study. Journal of Electroanalytical Chemistry, 655 (001). pp. 79-86. ISSN 1572-6657

Kumaravel, A. and Chandrasekaran, M. (2011) A biocompatible nano TiO2/nafion composite modified glassy carbon electrode for the detection of fenitrothion. Journal of Electroanalytical Chemistry, 650 (002). pp. 163-170. ISSN 1572-6657

Rangarajan, T.M. and Sathyamoorthi, S. and Velayutham, D. and Noel, M. and Singh, R.P. and Brahma, R. (2011) Products formed at intermediate stages of electrochemical perfluorination of propionyl and n-butyryl chlorides. Further evidence in support of NiF3 mediated free radical pathway. Journal of Fluorine Chemistry, 132 (002). pp. 107-113. ISSN 0022-1139

Maruthamuthu, S. and Dhanibabu, T. and Veluchamy, A. and Palanichamy, S. and Subramanian, P. and Palaniswamy, N. (2011) Elecrokinetic separation of sulphate and lead from sludge of spent lead acid battery. Journal of Hazardous Materials, 193. pp. 188-193. ISSN 0304-3894

Vasudevan, S. and Lakshmi, J. and Sozhan, G. (2011) Effects of alternating and direct current in electrocoagulation process on the removal of cadmium from water. Journal of Hazardous Materials, 192 (001). pp. 26-34. ISSN 0304-3894

Abirami, D. and Vasudevan, S. and Epron, F. (2011) Nitrate reduction in water: Influence of the addition of a second metal on the performances of the Pd/CeO2 catalyst. Journal of Hazardous Materials, 185 (2-3). pp. 1412-1417. ISSN 0304-3894

Vidhya, V.S. and Padmavathy, P. and Murali, K.R. and Sanjeeviraja, C. and Manisankar, P. and Jayachandran, M. (2011) Development of porous silicon matrix and characteristics of porous silicon/tin oxide structures. Journal of Non-Crystalline Solids, 357. pp. 1522-1526. ISSN 0022-3093

Ganesh, V. and Farzana, S. and Sheela, B. (2011) Nickel hydroxide deposited indium tin oxide electrodes as electrocatalysts for direct oxidation of carbohydrates in alkaline medium. Journal of Power Sources, 196 (023). pp. 9890-9899. ISSN 0378-7753

Manokaran, A. and Pushpavanam, S. and Sridhar, P. and Pitchumani, S. (2011) Experimental analysis of spatio-temporal behavior of anodic dead-end mode operated polymer electrolyte fuel cell. Journal of Power Sources, 196 (023). pp. 9931-9938. ISSN 0378-7753

Manikandan, P. and Ananth, M.V. and Premkumar, T. and Raju, M. and Periasamy, P. and Manimaran, K. (2011) Solution combustion synthesis of layered LiNi0.5Mn0.5O2 and its characterization as cathode material for lithium-ion cells. Journal of Power Sources, 196 (023). pp. 10148-10155. ISSN 0378-7753

Nithya, C. and Thirunakaran, R. and Sivashanmugam, A. and Gopukumar, S. (2011) Microwave synthesis of novel high voltage (4.6 V) high capacity LiCuxCo1−xO2±ı cathode material for lithium rechargeable cells. Journal of Power Sources, 196 (016). pp. 6788-6793. ISSN 0378-7753

Harish, S. and Sabarinathan, R. and Joseph, J. and Phani, K.L.N. (2011) Role of pH in the synthesis of 3-aminopropyl trimethoxysilane stabilized colloidal gold/silver and their alloy sols and their application to catalysis. Materials Chemistry and Physics, 127. pp. 203-207. ISSN 0254-0584

Ananthi, A. and Nareshkumar, T. and Mathiyarasu, J. and Joseph, J. and Phani, K.L.N. and Yegnaraman, V. (2011) A novel potentiometric hydrogen peroxide sensor based on pKa changes of vinylphenylboronic acid membranes. Materials Letters, 065 (23-24). pp. 3563-3565. ISSN 0167-577X

Sivashanmugam, A. and Gopukumar, S. and Thirunakaran, R. and Nithya, C. and Prema, S. (2011) Novel Li4Ti5O12/Sn nano-composites as anode material for lithium ion batteries. Materials Research Bulletin, 46 (04). pp. 492-500. ISSN 0025-5408

Khomane, R.B. and Prakash, A.S. and Ramesha, K. and Sathiya, M. (2011) CTAB-assisted sol–gel synthesis of Li4Ti5O12 and its performance as anode material for Li-ion batteries. Materials Research Bulletin, 46 (07). pp. 1139-1142. ISSN 0025-5408

Ragavendran, K. and Chou, H.L. and Lu, L. and Lai, M.O. and Hwang, B.J. and Kumar, R.R. and Gopukumar, S. and Bosco, E. and Vasudevan, D. and Sherwood, D. (2011) Crystal habits of LiMn2O4 and their influence on the electrochemical performance. Materials Science and Engineering B, 176 (016). pp. 1257-1263. ISSN 0921-5107

Ramesha, K. and Prakash, A.S. and Sathiya, M. and Giridhar, M. and Shukla, A.K. (2011) Synthesis and photocatalytic properties of Ag[Li1/3Ru2/3]O2: A new delafossite oxide. Materials Science and Engineering B, 176 (002). pp. 141-146. ISSN 0921-5107

Subramanian, B. and Ananthakumar, R. and Vidhya, V.S. and Jayachandran, M. (2011) Influence of substrate temperature on the materials properties of reactive DC magnetron sputtered Ti/TiN multilayered thin films. Materials Science and Engineering B, 176 (001). 001-007. ISSN 0921-5107

Kalaivanan, A. and Perumal, S. and Pillai, N.N. and Murali, K.R. (2011) Characteristics of GZO thinfilms deposited by sol–gel dip coating. Materials Science in Semiconductor Processing, 14 (02). pp. 94-96. ISSN 1369-8001

Vasudevan, S. and Lakshmi, J. (2011) Effects of alternating and direct current in electrocoagulation process on the removal of cadmium from water – a novel approach. Separation and Purification Technology, 80 (03). pp. 643-651. ISSN 1383-5866

Aravindan, V. and Vickraman, P. and Madhavi, S. and Sivashanmugan, A. and Thirunakaran, R. and Gopukumar, S. (2011) Improved performance of polyvinylidenefluoride-hexafluoropropylene based nanocomposite polymer membranes containing lithium bis(oxalato)borate by phase inversion for lithium batteries. Solid State Sciences, 13 (05). pp. 1047-1051. ISSN 1293-2558

Subramanian, B. and Ananthakumar, R. and Jayachandran, M. (2011) Structural and tribological properties of DC reactive magnetron sputtered titanium/titanium nitride (Ti/TiN) multilayered coatings. Surface & Coatings Technology, 205 (011). pp. 3485-3492. ISSN 0257-8972

Subramanian, B. and Muraleedahran, C.V. and Ananthakumar, R. and Jayachandran, M. (2011) A comparative study of titanium nitride (TiN), titanium oxy nitride (TiON) and titanium aluminum nitride (TiAlN), as surface coatings for bio implants. Surface & Coatings Technology, 205 (21-22). pp. 5014-5020. ISSN 0257-8972

Firozbabu, K. and Marxe, K. and Anbukulandainathan, M. (2011) Anodically fabricated TiO2 nanopores for electrocatalytic reduction of aldehydes. Journal of Electroanalytical Chemistry, 663. pp. 79-83. ISSN 1572-6657

Nishanth, K.G. and Sridhar, P. and Pitchumani, S. (2011) Enhanced oxygen reduction reaction activity through spillover effect by Pt–Y(OH)3/C catalyst in direct methanol fuel cells. Electrochemistry Communications, 13. pp. 1465-1468. ISSN 1388-2481

Saravanan, M. and Ambalavanan, S. (2011) Failure analysis of cast-on-strap in lead-acid battery subjected to vibration. Engineering Failure Analysis (18). pp. 2240-2249. ISSN 1350-6307

Gunasekaran, S. and Arunachalam, S. (2011) Use of open access journals by Indian researchers. Current Science, 101 (10). pp. 1287-1295. ISSN 0011-3891

Maruthamuthu, S. and Nagendran, T. and Anandkumar, B. and Karthikeyan, M.S. and Palaniswamy, N. and Narayanan, G. (2011) Microbiologically influenced corrosion on rails. Current Science, 100 (6). pp. 870-880. ISSN 0011-3891

Sreekuttan, M.U. and Vishal, M.D. and Vijayamohanan, K.Pillai and Sreekumar, K. (2010) High Pt Utilization Electrodes for Polymer Electrolyte Membrane Fuel Cells by Dispersing Pt Particles Formed by a Preprecipitation Method on carbon “Polished” with Polypyrrole. Journal of Physical Chemistry C, 114 (34). pp. 14654-14661. ISSN 1932-7447

Ashvini, B.D. and Vinayak, S.K. and Vishal, M.D. and Vijayamohanan, K.Pillai and Manjusha, V.S. (2010) Direct transfer of micro-molded electrodes for enhanced mass transport and water management in PEMFC. Electrochemistry Communications, 12. pp. 1638-1641. ISSN 1388-2481

Rajasekar, A. and Anandkumar, B. and Maruthamuthu, S. and Ting, Y.P. and Rahman, P.K.S.M. (2010) Characterization of corrosive bacterial consortia isolated from petroleum-product-transporting pipelines. Applied Microbiology and Biotechnology, 85. pp. 1175-1188. ISSN 0175-7598

Jeyadheepan, K. and Palanichamy, P. and Swaminathan, V. and Jayachandran, M. and Sanjeeviraja, C. (2010) Thermal and optical properties of Cd2SnO4 thin films using photoacoustic spectroscopy. Applied Physics Letters, 98. pp. 919-925. ISSN 0003-6951

Jeyabharathi, C. and Senthil Kumar, S. and Kiruthika, G.V.M. and Phani, K.L.N. (2010) Aqueous CTAB-Assisted Electrodeposition of Gold Atomic Clusters and Their Oxygen Reduction Electrocatalytic Activity in Acid Solutions. Electrocatalysis on Gold Clusters, 49. 2925 -2928.

Elango, A. and Periasamy, V.M. and Paramasivam, M. and Rakesh, E. (2010) Novel polymeric inhibitor fo corrosion of 575 a um-nium in 2M NaOH solutions. Anti Corrosion Methods and Materials, 57 (1). pp. 3-5. ISSN 0003-5599

Gopalram, S.D. and Anbukulandainathan, M. and Ravi, G. (2010) On the study of pH effects in the microwave enhanced rapid synthesis of nano-ZnO. Applied Physics A, 99. pp. 197-203.

Thangavel, K. and Muralidharan, S. and Saraswathy, V. and Ann, K.Y. and Balamurugan, L. (2010) Relationship between Alumina and Chloride content on their physical and corrosion resistance properties of concrete. The Arabian Journal for Science and Engineering, 35 (2B). ISSN 1319-8025

Emmanuel, E.S.C. and Ramachandran, A.M. and Ravindran, A.D. and Natesan, M. and Maruthamuthu, S. (2010) Effect of some pare earth elements on dry matter partitioning, nodule formation and chlorophyll content in Arachis hypogaea L. plants. AJCS, 4 (9). pp. 670-675.

Emmanuel, E.S.C. and Anandkumar, B. and Natesan, M. and Maruthamuthu, S. (2010) Efficacy of rare earth elements on the physiological and biochemical characteristics of Zea mays L. Jouranal of American Chemical Society, 4 (4). pp. 289-294.

Selvakumar, K.V. and Basha, C.A. and Prabhu, H.J. and Kalaichelvi, P. and Nelliyan, S. (2010) The potential of free cells of Pseudomonas aeruginosa on textile dye degradation. Bioresource Technology, 101. pp. 2678-2684. ISSN 0960-8524

Doh, C.H. and Veluchamy, A. and Lee, D.J. and Lee, J.H. and Moon, S.I. and Park, C.W. and Kim, D.W. (2010) Comparative Study on Performances of Composite Anodes of SiO, Si and Graphite for Lithium Rechargeable Batteries. Bulletin of the Korean Chemical Society, 31 (5). pp. 1257-1261.

Premkumar, P. and Kannan, K. and Natesan, M. (2010) Effect of menthol coated craft paper on corrosion of copper in HCl environment. Bulletin of Materials Science, 33 (3). pp. 307-311.

Tintula, K.K. and Pitchumani, S. and Sridhar, P. and Shukla, A.K. (2010) PEDOT–PSSA as an alternative support for Pt electrodes in PEFCs. Bulletin of Materials Science, 33 (2). pp. 157-163. ISSN 0250-4707

Prakash, A.S. and Manikandan, P. and Ramesha, K. and Sathiya, M. and Tarascon, J.M. and Shukla, A.K. (2010) Solution-Combustion Synthesized Nanocrystalline Li4Ti5O12 As High-Rate Performance Li-Ion Battery Anode. Chemistry of Materials, 22. pp. 2857-2863. ISSN 0897-4756

Kulkarni, B.S. and Sailaja, K. and Pal, S. (2010) Influence of plane wave cut-off on structural and electronic properties in Sn-BEA and Ti-BEA zeolite water molecule interaction. Chemical Physics Letters, 484. pp. 374-379. ISSN 0009-2614

Vasudevan, S. and Lakshmi, J. and Vanathi, R. (2010) Electrochemical Coagulation for Chromium Removal: Process Optimization, Kinetics, Isotherms and Sludge Characterization. Clean, 38 (1). 9 -16.

Vasudevan, S. and Epron, F. and Lakshmi, J. and Ravichandran, S. and Mohan-, S. and Sozhan, G. (2010) Removal of NO3– from Drinking Water by Electrocoagulation – An Alternate Approach. Clean – Soil, Air, Water, 38 (3). pp. 225-229. ISSN 1863-0650

Vasudevan, S. and Lakshmi, J. and Sozhan, G. (2010) Studies on the Removal of Arsenate by Electrochemical Coagulation Using Aluminum Alloy Anode. Clean – Soil, Air, Water, 38 (5-6). pp. 506-515. ISSN 1863-0650

Ahamed, M.G.S.B. and Nagarethinam, V.S. and Balu, A.R. and Thayumanavan, A. and Murali, K.R. and Sanjeeviraja, C. and Jayachandran, M. (2010) Influence of substrate temperature on the properties of electron beam evaporated ZnSe films. Crystal Research and Technology, 45 (4). 421 -426. ISSN 0232-1300

Sivaramamoorthy, K. and Bahadur, S.A. and Kottaisamy, M. and Murali, K.R. (2010) Structural, optical and photoconductive properties of electron beam evaporated CdSxSe1-x films. Crystal Research and Technology, 45 (4). 414 -420. ISSN 0232-1300

Syedbasheerahamed, M.S. and Balu, A.R. and Nagarethinam, V.S. and Thayumanavan, A. and Murali, K.R. and Sanjeeviraja, C. and Jayachandran, M. (2010) Structural, optical, and electrical properties of electron beam evaporated CdSe thin films. Crystal Research and Technology, 45 (4). 387 -392. ISSN 0232-1300

Mohanapriya, S. and Sridhar, P. and Pitchumani, S. and Shukla, A.K. (2010) Influence of Surface Pre-treatment of MWNTs Support on PEFC Performance. ECS Transactions, 28 (17). pp. 43-53. ISSN 1938-5862

Suryanarayanan, V. and Wu, C.T. and Ho, K.C. (2010) Molecularly Imprinted Electrochemical Sensors. Electroanalysis, 22 (16). pp. 1795-1811. ISSN 1040-0397

Mathiyarasu, J. and Nyholm, L. (2010) Voltammetric Determination of l-Dopa on Poly(3,4-ethylenedioxythiophene)-Single-Walled Carbon Nanotube Composite Modified Microelectrodes. Electroanalysis, 22 (4). 449 -454. ISSN 1040-0397

Firozbabu, K. and Anbukulandainathan, M. and Katsounaros, I. and Rassaei, L. and Burrows, A.D. and Raithby, P.R. and Marken, F. (2010) Electrocatalytic activity of BasoliteTM F300 metal-organic-framework structures. Electrochemistry Communications, 12. pp. 632-635. ISSN 1388-2481

Angulakshmi, N. and Premkumar, T. and Thomas, S. and Manuelstephan, A. (2010) Ionic conductivity and interfacial properties of nanochitin-incorporated polyethylene oxide–LiN(C2F5SO2)2 polymer electrolytes. Electrochimica Acta, 55. pp. 1401-1406.

Mohanapriya, S. and Bhat, S.D. and Sahu, A.K. and Manokaran, A. and Vijayakumar, R. and Pitchumani, S. and Sridhar, P. and Shukla , A.K. (2010) Sodium-alginate-based proton-exchange membranes as electrolytes for DMFCs. Energy & Environmental Science, 3. pp. 1746-1756. ISSN 0958-305X

Samir, O.M. and Madhu, S. and Somashekar, R. (2010) X-ray Diffraction Analysis of Yemeni Cotton Fibers. Fibers and Polymers, 11 (3). pp. 413-421. ISSN 1229-9197

Kulangiappar, K. and Anbukulandainathan, M. and Raju, T. (2010) Conversion of Benzylic Bromides to Benzaldehydes Using Sodium Nitrate As an Oxidant. Industrial Engineering & Chemical Research, 49. pp. 6670-6673.

Vijayabarathi, T. and Vijayarani, K. and Noel, M. (2010) Evaluation of Porous Nickel Hydroxide Electrode for the Oxidation of aliphatic and aromatic primary alchohols. Indian Journal of Chemical Technology, 17. pp. 411-418.

Babu, G. and Kalaiselvi, N. and Bhuvaneswari, D. and Doh, C.H. (2010) On the Synergistic Effect of Carbonate Anion Directed Shape Controlled Morphology and Super P Carbon in Preparing LiFePO4/C Cathode With Improved Lithium Intercalation Behavior. International Journal of ELECTROCHEMICAL SCIENCE, 5. 1597 -1604. ISSN 1452-3981

Gomathipriya, P. and Basha, C.A. and Ramamurthi, V. (2010) Removal of Ni(II) from electroplating rinse waters using cation-exchange resins: batch and column studies. International Journal Environmental Engineering, 2 (4). ISSN 1756-8463

Manimaran, K. and Ananth, M.V. and Raju, M. and Renganathan, N.G. and Ganesan, M. (2010) Electrochemical investigations on cobalt-microencapsulated MmNi2.38Al0.82Co0.66Si0.77Fe0.13Mn0.24 hydrogen storage alloys for Ni–MH batteries. International Journal of Hydrogen Energy , 35. 4 6 3 0 -4 6 3 7. ISSN 0360-3199

Angappan, S. and Rajalakshmi, A. and Arockia, V. and Berchmans, L.J. and Visuvasam, A. (2010) Aluminum Nitride by Microwave Assisted Synthesis: Effect of Added Ammonium Chloride1. International Journal of Self Propagating High Temperature Synthesis, 19 (3). pp. 214-220. ISSN International Journal of Self Propagating High Temperature Synthesis

Selvakumar, K.V. and Basha, C.A. and Prabhu, H.J. and Narayanan, A. and Nagarajan, J. (2010) Electro Oxidation and Biodegradation of Textile Dye Effluent Containing Procion Blue 2G Using Fungal Strain Phanerochate Chrysosporium MTCC 787. International Journal of Chemical Reactor Engineering, 8 (A147). ISSN 1542-6580

Ilayaraja, N. and Radhakrishnan, S. and Renganathan, N.G. (2010) Electrochemical fluorination of dimethyl glutarate and its characterization. Ionics, 16. pp. 137-144.

Radhakrishnan, S. and Ganesan, M. and Renganathan, N.G. (2010) NMR studies on the composition of PVdF-HFP membrane for Li batteries. Ionics, 16. pp. 717-722.

Helan, M. and Berchmans, L.J. and Zahirhussain, A. (2010) Synthesis of LiMn2O4 by molten salt technique. Ionics, 16. pp. 227-231. ISSN 0947-7047

Sridevikumari, T. and Premkumar, T. (2010) Synthesis of macroporous LiMn2O4 with avian egg membrane as a template. Ionics, 16. pp. 61-66. ISSN 0947-7047

Manivel, A. and Velayutham, D. and Noel, M. (2010) Voltammetric behavior of perfluorocarboxylic acids and their corresponding ethyl esters on glassy carbon electrode: surface effects. Ionics, 16. pp. 153-159. ISSN 0947-7047

Jayaprakash, N. and Kalaiselvi, N. and Doh, C.H. and Babu, G. and Bhuvaneswari, D. (2010) A new class of Sol–gel derived LiM1xM2yMn22x2yO3.8F0.2 (M1 5 Cr, M2 5 V; x 5 y 5 0.2) cathodes for lithium batteries. Journal of Applied Electrochemistry, 40. pp. 2193-2202. ISSN 0021-891X

Anandhakumar, S. and Chandrasekaran, M. and Noel, M. (2010) Anodic oxidation of chlorophenols in micelles and microemulsions on glassy carbon electrode: the medium effect on electroanalysis and electrochemical detoxification. Journal of Applied Electrochemistry, 40. pp. 303-310. ISSN 0021-891X

Amutha, R. and Josiah, J.J.M. and Adriel Jebin, J. and Jagannathan, P. and Sheela, B. (2010) Chromium hexacyanoferrate as a cathode material in microbial fuel cells. Journal of Applied Electrochemistry, 40. pp. 1985-1990. ISSN 0021-891X

Sekar, R. and Eagammai, C. and Sobha , J. (2010) Effect of additives on electrodeposition of tin and its structural and corrosion behaviour. Journal of Applied Electrochemistry, 40. pp. 49-57. ISSN 0021-891X

Neelavannan, M.G. and Basha, C.A. (2010) Ag–TiO2 doped photo catalytic degradation of Procion blue H-B dye in textile washwater. Toxicological & Environmental Chemistry, 92 (8). pp. 1423-1434.

Choi, J.H. and Maruthamuthu, S. and Lee, H.G. and Ha, T.H. and Bae, J.H. and Alshawabkeh, A.N. (2010) Removal of phosphate from agricultural soil by electrokinetic remediation with iron electrode. Journal of Applied Electrochemistry, 40. pp. 1101-1111. ISSN 0021-891X

Nirmala, J.N. and Kumaravel, A. and Chandrasekaran, M. (2010) Stearic acid modified glassy carbon electrode for electrochemical sensing of parathion and methyl parathion. Journal of Applied Electrochemistry, 40. pp. 1571-1574. ISSN 0021-891X

Saravanan, G. and Mohan, S. (2010) Structure, current efficiency, and corrosion properties of brush electrodeposited (BED) Cr from Cr(III)dimethyl formamide (DMF)-bath. Journal of Applied Electrochemistry, 40. pp. 1-6. ISSN 0021-891X

Selvaraj, M. and Palraj, S. and Maruthan, K. and Rajagopal, G. and Venkatachari, G. (2010) Synthesis and Characterization of Polypyrrole Composites for Corrosion Protection of Steel. Journal of Applied Polymer Science, 116. pp. 1524-1537. ISSN 0021-8995

Tintula, K.K. and Pitchumani, S. and Sridhar, P. and Shukla, A.K. (2010) A solid-polymer-electrolyte direct methanol fuel cell (DMFC) with Pt–Ru nanoparticles supported onto poly(3,4-ethylenedioxythiophene) and polystyrene sulphonic acid polymer composite as anode. Journal of Chemistry and Science, 122 (3). pp. 381-389.

Vasudevan, S. and Sheela, S.M. and Lakshmi, J. and Sozhan, G. (2010) Optimization of the process parameters for the removal of boron from drinking water by electrocoagulation – a clean technology. Journal of Chemical Technology and Biotechnology, 85. pp. 926-933. ISSN 0268-2575

Suryanarayanan, V. and Noel, M. (2010) A comparative evaluation on the voltammetric behavior of boron-doped diamond (BDD) and glassy carbon (GC) electrodes in different electrolyte media. Journal of Electroanalytical Chemistry, 642. pp. 69-74.

Kumaravel, A. and Chandrasekaran, M. (2010) A novel nanosilver/nafion composite electrode for electrochemical sensing of methyl parathion and parathion. Journal of Electroanalytical Chemistry, 638. pp. 231-235. ISSN 1572-6657

Ilayaraja, N. and Noel, M. (2010) Galvanostatic and potentiostatic fluorination of 2-indanone, 1-indanone and 1,3-indandione in Et3N 4HF medium. Adsorption effects on yield and product selectivity. Journal of Electroanalytical Chemistry, 638. pp. 39-45. ISSN 1572-6657

Vinod Selvaganesh, S. and Selvarani, G. and Sridhar, P. and Pitchumani, S. and Shukla, A.K. (2010) A Durable PEFC with Carbon-Supported Pt–TiO2 Cathode: A Cause and Effect Study. Journal of the Electrochemical Society, 157 (7). B1000-B1007. ISSN 0013-4651

Jeyabharathi, C. and Venkateshkumar, P. and Mathiyarasu, J. and Phani, K.L.N. (2010) Carbon-Supported Palladium–Polypyrrole Nanocomposite for Oxygen Reduction and Its Tolerance to Methanol. Journal of the Electrochemical Society, 157 (11). B1740-B1745. ISSN 0013-4651

Kiran, V. and Ravikumar, T. and Kalyanasundaram, N.T. and Krishnamurty, S. and Shukla, A.K. and Sampath, S. (2010) Electro-Oxidation of Borohydride on Rhodium, Iridium, and Rhodium–Iridium Bimetallic Nanoparticles with Implications to Direct Borohydride Fuel Cells. Journal of the Electrochemical Society, 157 (8). B1201-B1208. ISSN 0013-4651

Kamaraj, K. and Karpakam, V. and Sathiyanarayanan, S. and Venkatachari, G. (2010) Electrosynthesis of Polyaniline Film on AA 7075 Alloy and Its Corrosion Protection Ability. Journal of the Electrochemical Society, 157 (3). C102-C109. ISSN 0013-4651

Tintula, K.K. and Sahu, A.K. and Shahid, A. and Pitchumani, S. and Sridhar, P. and Shukla, A.K. (2010) Mesoporous Carbon and Poly(3,4-ethylenedioxythiophene) Composite as Catalyst Support for Polymer Electrolyte Fuel Cells. Journal of the Electrochemical Society, 157 (11). B1679-B1685. ISSN 0013-4651

Rajakumar, S. and Thirunakaran, R. and Sivashanmugam, A. and Gopukumar, S. (2010) Synthesis, Characterization, and Electrochemical Properties of LiCrxNiyMn2−x−yO4 Spinels as Cathode Material for 5 V Lithium Battery. Journal of the Electrochemical Society, 157 (3). A333-A339. ISSN 0013-4651

Prabhakaran, D. and Basha, C.A. and Kannadasan, T. and Aravinthan, P. (2010) Removal of hydroquinone from water by electrocoagulation using flow cell and optimization by response surface methodology. Journal of Environmental Science and Health - Part A, 45. pp. 400-412.

Basha, C.A. and Soloman, P.A. and Velan, M. and Miranda, L.R. and Balasubramanian, N. and Siva, R. (2010) Electrochemical degradation of specialty chemical industry effluent. Journal of Hazardous Materials, 176. pp. 154-164. ISSN 0304-3894

Chellammal, S. and Raghu, S. and Kalaiselvi, P. and Subramanian, G. (2010) Electrolytic recovery of dilute copper from a mixed industrial effluent of high strength COD. Journal of Hazardous Materials, 180. pp. 91-97. ISSN 0304-3894

Chellammal, S. and Raghu, S. and Kalaiselvi, P. and Subramanian, G. (2010) Electrolytic recovery of dilute copper from a mixed industrial effluent of high strength COD. Journal of Hazardous Materials, 180. pp. 91-97. ISSN 0304-3894

Samsonnesaraj, A. and Arulraj, I. and Pattabiraman, R. (2010) Preparation and Characterization of Ceria-Based Electrolytes for Intermediate Temperature Solid Oxide Fuel Cells (IT-SOFC). Journal of Iranian Chemical Society, 7 (3). 564-584..

Aman, N. and Mishra, T. and Sahu, R.K. and Tiwari, J.P. (2010) Facile synthesis of mesoporous N doped zirconium titanium mixed oxide nanomaterial with enhanced photocatalytic activity under visible light. Journal of Materials Chemistry, 20. pp. 10876-10882. ISSN 0959-9428

Chandrasekar, M.S. and Shanmugaigamani, S. and Malathy, P. (2010) Structural and textural study of electrodeposited zinc from alkaline non-cyanide electrolyte. Journal of Materials Science, 45. pp. 1160-1169. ISSN 0022-2461

Murali, K.R. and Kala, S. and Elango, P. (2010) Characteristics of ZnS films pulse plated using non-aqueous electrolytes. Journal of Materials Science, 21. pp. 1293-1298. ISSN 0022-2461

Malathy, V. and Sivaranjani, S. and Vidhya, V.S. and Balasubramanian, T. and Josephprince, J. and Sanjeeviraja, C. and Jayachandran, M. (2010) Role of substrate temperature on the structural, optoelectronic and morphological properties of (400) oriented indium tin oxide thin films deposited using RF sputtering technique. Journal of Materials Scienc, 21. pp. 1299-1307.

Senthilkumar, V. and Vickraman, P. and Jayachandran, M. and Sanjeeviraja, C. (2010) Structural and electrical studies of nano structured Sn12x SbxO2(x 5 0.0, 1, 2.5, 4.5 and 7 at%) prepared by co-precipitation method. Journal of Materials Science: Materials in Electronics, 21. pp. 343-348. ISSN 0957-4522

Ahamed, M.G.S.B. and Nagarethinam, V.S. and Thayumanavan, A. and Murali, K.R. and Sanjeeviraja, C. and Jayachandran, M. (2010) Structural, optical, electrical and morphological properties of ZnTe films deposited by electron beam evaporation. Journal of Materials Science, 21. pp. 1229-1234. ISSN 0022-2461

Bhakti, S. and Kulkarni, S. and Sailaja, K. and Sourav, P. (2010) Probing Lewis acidity and reactivity of Sn- and Ti-beta zeolite using industrially important moieties: A periodic density functional study. Journal of Molecular Catalysis, 329. pp. 36-43.

Vijayalakshmi, A. and Karthikeyan, R. and Sheela, B. (2010) Nonenzymatic Reduction of Hydrogen Peroxide Produced during the Bioelectrocatalysis of Glucose Oxidase on Urchin-like Nanofibrillar Structures of Cu on Au Substrates. Journal of Physics and Chemistry, 114. pp. 22159-22164.

Sekhar De, H. and Sailaja, K. and Pal, S. (2010) Understanding the Reactivity Properties of Aun (6 e n e 13) Clusters Using Density Functional Theory Based Reactivity Descriptors. Journal of Physical Chemistry B, 114. pp. 6690-6703. ISSN 1520-6106

Kalaiselvi, N. and Manthiram, A. (2010) One-pot, glycine-assisted combustion synthesis and characterization of nanoporous LiFePO4/C composite cathodes for lithium-ion batteries. Journal of Power Sources, 195. pp. 2894-2899.

Senthilkumar, V. and Vickraman, P. and Ravikumar, R. (2010) Synthesis of fluorine doped tin oxide nanoparticles by sol–gel technique and their characterization. Journal of Sol-Jel Science Technology, 53. pp. 316-321. ISSN 0928-0707

Karthikeyan, N. and Giridhar, V.V. and Vasudevan , D. (2010) Surfactant effects on methanol oxidation at Pt–Ru/C coated glassy carbon electrode. Journal of Solid State Electrochemistry, 14. pp. 877-881. ISSN 1432-8488

Fey, G.T.K. and Chang, C.S. and Premkumar, T. (2010) Synthesis and surface treatment of LiNi1/3Co1/3Mn1/3O2 cathode materials for Li-ion batteries. Journal of Solid State Electrochemistry, 14. pp. 17-26. ISSN 1432-8488

Selvakumar, M. and Pitchumani, S. (2010) Hybrid supercapacitor based on poly(aniline-co-m-anilicacid) and activated carbon in non-aqueous electrolyte. Korean Journal of Chemical Engineering, 27 (3). pp. 977-982.

Vedalakshmi, R. and Balamurugan, L. and Saraswathy, V. and Kim, S.H. and Ann, K.Y. (2010) Reliability of Galvanostatic Pulse Technique in Assessing the Corrosion Rate of Rebar in Concrete Structures: Laboratory vs Field Studies. Korean Society of Chemical Engineering Journal of Civil Engineering, 14 (6). pp. 867-877.

Vedalakshmi, R. and Palaniswamy, N. (2010) Analysis of the electrochemical phenomenon at the rebar–concrete interface using the electrochemical impedance spectroscopic technique. Magazine of Concrete Research, 62 (3). pp. 177-189. ISSN 0024-9831

Patchaiah, K. and Chellammal, S. and Palanichamy, S. and Subramanian, G. (2010) Artemisia pallens as corrosion inhibitor for mild steel in HCl medium. Materials Chemistry and Physics, 120. pp. 643-648. ISSN 0254-0584

Kamaraj, K. and Karpakam, V. and Sathiyanarayanan, S. and Venkatachari, G. (2010) Electrosysnthesis of poly(aniline-co-m-amino benzoic acid) for corrosion protection of steel. Materials Chemistry and Physics, 122. pp. 123-128. ISSN 0254-0584

Syedabuthahir, K.A.Z. and Jagannathan, R. (2010) Reverse-loop impedance profile in Bi2S3 quantum dots. Materials Chemistry and Physics, 121. pp. 184-192. ISSN 0254-0584

Chandrasekar, M.S. and Shanmugasigamani, S. and Pushpavanam, M. (2010) Synergetic effects of pulse constraints and additives in electrodeposition of nano-crystalline zinc:Corrosion,structural and textural characterization. Materials Chemistry and Physics, 124. pp. 516-528.

Natesan, M. and Muralidharan, S. and Palaniswamy, N. (2010) Atmospheric Corrosion Performance of Engineering Materials in India. NACE International, 49 (8).

Raj, J.A. and Mathiyarasu, J. and Vedhi, C. and Manisankar, P. (2010) Electrochemical synthesis of nanosize polyaniline from aqueous surfactant solutions. Materials Letters, 64. pp. 895-897. ISSN 0167-577X

Poongothai, N. and Ramachanderen, T. and Natesan, M. and Murugavel, S.G. (2010) Corrosion Inhibition of Mild Steel by Essential Oils in an HCl Environment. Materials Performance, 48 (9).

Bellakki, M.B. and Shivakumara, C. and Vasanthacharya, N.Y. and Prakash, A.S. (2010) Rapid synthesis of room temperature ferromagnetic Ag-doped LaMnO3 perovskite phases by the solution combustion method. Materials Research Bulletin, 45. pp. 1685-1691. ISSN 0025-5408

Senthilkumar, V. and Vickraman, P. and Joseph Prince, J. and Jayachandran, M. and Sanjeeviraja, C. (2010) Effects of annealing temperature on structural, optical, and electrical properties of antimony-doped tin oxide thin films. Philosophical Magazine Letters, 90 (5). pp. 337-347. ISSN 0950-0839

Bahramy, M.S. and Murugan, P. and Das, G.P. and Kawazoe, Y. (2010) Effect of electron correlations on structural phase stability, magnetism, and spin-dependent transport in CeMnNi4. PHYSICAL REVIEW, 81. ISSN 1098-0121

Vasudevan, D. (2010) The effect of cathode materials on the electrochemical reduction of nitric acid. Polish Journal of Chemical Technology, 12 (1). pp. 35-37.

Athijayamani, A. and Thiruchitrambalam, M. and Natarajan, U. and Pazhanivel, B. (2010) Influence of Alkali-Treated Fibers on the Mechanical Properties and Machinability of Roselle and Sisal Fiber Hybrid Polyester Composite. POLYMER COMPOSITES.

Nathirabegum, S. and Basha, C.A. and Muralidharan, V.S. (2010) Role of Halides on the Passivation of Iron in Alkaline Buffer Solutions. Portugaliae Electrochimica Acta, 28 (3). pp. 143-151. ISSN 0872-1904

Matheswaran, M. and Raju, T. (2010) Destruction of methylene blue by mediated electrolysis using two-phase system. Process Safety and Environmental Protection, 88. pp. 350-355.

Selvaraj, M. and Maruthan, K. and Palraj, S. and Venkatachari, G. (2010) Preparation and characterization of thermally stable epoxy-titanate coatings. Progress in Organic Coatings, 67. pp. 339-347. ISSN 0021-8995

Moses Ezhil Raj, A. and Som, T. and Jayachandran, M. and Sanjeeviraja, C. (2010) Defect engineering and opto electronic property modifications by 1.5MeV Li+ implantation on nano crystalline MgIn2O4 thin films. Radiation Effects & Defects in Solids: Incorporating Plasma Science & Plasma Technology, 165 (4). pp. 265-276.

Muralidharan, S. and Saraswathy, V. and Berchmans, L.J. and Thangavel, K. and Yong, K.A. (2010) Nickel ferrite (NiFe2O4): A possible candidate material as reference electrode for corrosion monitoring of steel in concrete environments. Sensors and Actuators B: Chemical, 145. pp. 225-231. ISSN 0925-4005

Vasudevan, S. and Lakshmi, J. and Sozhan, G. (2010) Studies Relating to Removal of Arsenate by Electrochemical Coagulation: Optimization, Kinetics, Coagulant Characterization. Separation Science and Technology, 45. pp. 1313-1325. ISSN 0149-6395

Gopalram, S.D. and Anbukulandainathan, M. and Ravi, G. (2010) Short time and low temperature mineralization of ZnO nanorod-bunches from solution using cetyl trimethyl ammonium bromide. Super lattices and Microstructures, 48. pp. 126-132.

Sathiyanarayanan, S. and Karpakam, V. and Kamaraj, K. and Muthukrishnan, S. and Venkatachari, G. (2010) Sulphonate doped polyaniline containing coatings for corrosion protection of iron. Surface & Coatings Technology, 204. pp. 1426-1431. ISSN 0257-8972

Parthiban, G.T. and Malarkodi, D. and Palaniswamy, N. and Venkatachari, G. (2010) Corrosion protection by acrylamide treatment for magnesium alloy metal matrix composite (MMC) reinforced with titanium boride. Surface Engineering, 26 (5). ISSN 0267-0844

Srinivasan, K.N. and Meenakshi, R. and Santhi, A. and Thangavelu, P.R. and John, S. (2010) Studies on development of electroless Ni–B bath for corrosion resistance and wear resistance applications. Surface Engineering, 26 (3). ISSN 0267-0844

Senthil Kumar, R. and Kulangiappar, K. and Anbukulandainathan, M. (2010) Convenient electrochemical method for the synthesis of a-bromo alkyl aryl ketones. Synthetic Communications, 40. pp. 1736-1742. ISSN 0039-7911

Lee, K.M. and Chiu, W.H. and Wei, H.Y. and Hu, C.W. and Suryanarayanan, V. and Hsieh, W.F. and Ho, K.C. (2010) Effects of mesoscopic poly(3,4-ethylenedioxythiophene) films as counter electrodes for dye-sensitized solar cells. Thin Solid Films, 518. pp. 1716-1721.

Rekha, S. and Srinivasan, K.N. and John, S. (2010) Electroless deposition of copper from methane sulphonate complexed bath. Transactions of the Institute of Metal Finishing, 88 (4). ISSN 0020-2967

Selvam, M. (2010) Electroless silver deposition on ABS plastic using Co(II) as reducing agent. Transactions of the Institute of Metal Finishing, 88 (4). ISSN 0020-2967

Rameshbabu, B. and Seenimeera, K. and Venkatesan, P. and Sunandha, D. (2010) Removal of Fatty Acids from Palm Oil Effluent by Combined Electro-Fenton and Biological Oxidation Process. Water Air Soil Pollution, 211.

Meera, P. and Ramaiyan, K. and Kurungot, S. and Vijayamohanan, K.Pillai (2010) Bio-inspired catalyst compositions for enhanced oxygen reduction using nanostructured Pt electrocatalysts in polymer electrolyte fuel cells. Journal of Materials Chemistry, 20. pp. 9651-9657.

Bhalchandra, A.K. and Vijayamohanan, K.Pillai and Dattatray, J. L. and Padmakar, G. C. and Farid, J. S. and Mahendra, A. M. and Dilip, S. J. (2010) High current density, low threshold field emission from functionalized carbon nanotube bucky paper. Applied Physics Letters. ISSN 0003-6951

Ramaiyan, K. and Pradnya, P. A. and Thangavelu, P. and Sreekumar , K. and Ulhas, K.K. and Vijayamohanan, K.Pillai (2010) Artificially Designed Membranes Using Phosphonated Multiwall Carbon Nanotube-Polybenzimidazole Composites for Polymer Electrolyte Fuel Cells. Journal of Physics Chemistry Letters. pp. 2009-2013. ISSN 1948-7185

Bhaskar, R.S. and Bhalchandra, A. K. and Ajay, K. and Mohammednazar, A. and Vijayamohanan, K.Pillai (2010) Synthesis of Rh–carbon nanotube based heterostructures and their enhanced field emission characteristics. Chemical Communications, 46. pp. 5671-5673. ISSN 1359-7345

Beena, K.B. and Vinayak, S.K. and Pradnya, P.A. and Manjusha, V.S. and Vijayamohanan, K.Pillai and Sreekumar , K. (2010) High aspect ratio nanoscale multifunctional materials derived from hollow carbon nanofiber by polymer insertion and metal decoration. Chemical Communications, 46. pp. 5590-5592. ISSN 1359-7345

Bhaskar, R.S. and Beena, K.B. and Vijayamohanan, K.Pillai (2010) Tunable optical features from self-organized rhodium nanostructures. Applied Physics Letters, 96 (233102). ISSN 0003-6951

Farid, J.S. and Mahendra, A.M. and Sandesh, R.J. and Patil, K.R. and Vijayamohanan, K.Pillai and Dilip, S.J. (2010) Observation of Photoconductivity in Sn-Doped ZnO Nanowires and Their Photoenhanced Field Emission Behavior. Journal of Physical Chemistry C. pp. 3843-3849. ISSN 1932-7447

Radhakrishnan, S. and Rao, C.R.K. and Vijayan, M. (2009) Electrochemical Synthesis and Studies of Polypyrroles Doped by Renewable Dopant Cardanol Azophenylsulfonic Acid Derived from Cashew Nutshells. Journal of Applied Polymer Science, 114 (5). pp. 3125-3131. ISSN 0021-8995

Parthiban, G.T. and Palaniswamy, N. and Sivan, V. (2009) Effect of manganese addition on anode characteristics of electrolytic magnesium. Anti Corrosion Methods and Materials, 56 (2). pp. 79-83. ISSN 0003-5599

Sheela, B. and Arunkumar, P. and Lalitha, S. and Yegnaraman, V. and Bera, S. (2009) Preparation of catalytic films of platinum on Au substrates modified by self-assembled PAMAM dendrimer monolayers. Applied Catalysis B: Environmental, 88 (3-4). pp. 557-563. ISSN 0926-3373

Aravindan, V. and Vickraman, P. and Shivashanmugam, A. and Thirunakaran, R. and Gopukumar, S. (2009) LiFAP-based PVdF–HFP microporous membranes by phase-inversion technique with Li/LiFePO4 cell. Applied Physics A, 97 (4). pp. 811-819. ISSN 0947-8396

Gangulibabu, . and Bhuvaneswari, D. and Kalaiselvi, N. (2009) Feasibility studies on newly identified LiCrP2O7 compound for lithium insertion behavior. Applied Physics A, 96 (2). pp. 489-493.

Sharmistha, B. and Shahid, A. and Lalla, N.P. (2009) Effect of swift heavy ion irradiation in Fe/W multilayer structures. Applied Surface Science, 256 (2). pp. 541-546. ISSN 0169-4332

Eashwar, M. and Subramanian, G. and Palanichamy, S. and Rajagopal, G. and Madhu, S. and Kamaraj, P. (2009) Cathodic behaviour of stainless steel in coastal Indian seawater: Calcareous deposits overwhelm biofilms. Biofouling, 25 (3). pp. 191-201. ISSN 0892-7014

Premkumar, T. and Kannan, K. and Natesan, M. (2009) Evaluation of menthol as vapor phase corrosion inhibitor for mild steel in NaCl. The Arabian Journal for Science and Engineering, 34 (2C). pp. 71-79.

Salome, J.P. and Amutha, R. and Jagannathan, P. and Joshiah, J.J.M. and Sheela, B. and Yegnaraman, V. (2009) Electrochemical assay of the nitrate and nitrite reductase activities of Rhizobium japonicum. Biosensors and Bioelectronics, 24 (12). pp. 3487-3491.

Thangavelu, K. and Muralidharan, S. and Saraswathy, V. and Quraishi, M.A. and Ann, K.Y. (2009) Migrating vs admixed corrosion inhibitors for steel in Portland, Pozzolona and Slag cement concretes under macro cell condition. The Arabian Journal for Science and Engineering, 34 (2C). pp. 81-93.

Doh, C.H. and Kim, D.H. and Lee, J.H. and Lee, D.J. and Jin, B.S. and Kim, H.S. and Moon, S.I. and Hwang, Y. and Veluchamy, A. (2009) Thermal Behavior of LixCoO2 Cathode and Disruption of Solid Electrolyte Interphase Film. Bulletin of Korean Chemical Society, 30 (4). pp. 783-786.

Sahu, A.K. and Pitchumani, S. and Sridhar, P. and Shukla, A.K. (2009) Nafion and modified-Nafion membranes for polymer electrolyte fuel cells: An overview. Bulletin of Material Science, 32 (3). pp. 285-294.

Goursot, A. and Mineva, T. and Krishnamurthy, S. and Salahub, D.R. (2009) Structural analysis of phosphatidyl choline lipids and glycerol precursors. Canadian Journal of Chemical Reviews - Canadian Chemistry, 87 (10). pp. 1261-1267.

Sahu, A.K. and Nishanth, K.G. and Selvarani, G. and Sridhar, P. and Pitchumani, S. and Shukla, A.K. (2009) Polymer electrolyte fuel cells employing electrodes with gas-diffusion layers of mesoporous carbon derived from a sol–gel route. Carbon, 47 (1). pp. 102-108.

Harish, S. and Mathiyarasu, J. and Phani, K.L.N. and Yegnaraman, V. (2009) Synthesis of Conducting Polymer Supported Pd Nanoparticles in Aqueous Medium and Catalytic Activity Towards 4-Nitrophenol Reduction. Catalyst Letters, 128 (1-2). pp. 197-202.

Sri Devi Kumari, T. and Kannan, R. and Premkumar, T. (2009) Synthesis of LiMn2O4 from a gelled ovalbumin matrix. Ceramics International, 128 (1-2). pp. 197-202. ISSN 0272-8842

Madhanakumar, K.S. and Berchmans, L.J. (2009) Combustion synthesis of Ca1xCuxAl2O4 (x = 0.0, 0.4 and 0.8) copper doped calcium aluminate. Ceramics International, 35 (3). pp. 1277-1280.

Murali, K.R. and Thirumoorthy, P. (2009) Photoelectrochemical properties of CdSxTe1-x films. Chalcogenide Letters, 6 (8). pp. 377-384. ISSN 1584-8663

Murali, K.R. and Ramanathan, P. (2009) Characteristics of slurry coated lead selenide films. Chalcogenide Letters, 6 (3). pp. 91-95. ISSN 1584-8663

Murali, K.R. and Manoharan, C. and Dhanapandiyan, S. (2009) Photoelectrochemical properties of pulse electrodeposited cadmium selenide films. Chalcogenide Letters, 6 (1). pp. 57-61. ISSN 1584-8663

Murali, K.R. and Dhanapandiyan, S. and Manoharan, C. (2009) Pulse electrodeposited zinc selenide films and their characteristics. Chalcogenide Letters, 6 (1). pp. 51-56. ISSN 1584-8663

Murali, K.R. and Austine, A. (2009) Deposition of Cd-xZn1-xSe films by brush electrodeposition and their characteristics. Chalcogenide Letters, 6 (1). pp. 23-28. ISSN 1584-8663

Murali, K.R. and Kumaresan, S. (2009) Characteristics of brush plated ZnS films. Chalcogenide Letters, 6 (1). pp. 17-22. ISSN 1584-8663

Murali, K.R. and Jayasuthaa, B. (2009) Photoelectrochemical characteristics of brush electrodeposited dSexte1-x thin films. Chalcogenide Letters, 6 (1). pp. 1-8. ISSN 1584-8663

Basha, C.A. and Chithra, E. and Sripriyalakshmi, N.K. (2009) Electro-degradation and biological oxidation of non-biodegradable organic contaminants. Chemical Engineering Journal, 149 (1-3). pp. 25-34.

Basha, C.A. and Sathish, M. and Shankar, . and Vijayasekaran, B and Rao, S and Pullabhotla, . (2009) Computation of Current Distributions using FEMLAB. Chemical Engineering and Technology, 32 (4). pp. 659-672. ISSN 0930-7516

Chandrasekara Pillai, K. and Chung, S.J. and Raju, T. and Moon, I.S. (2009) Experimental aspects of combined NOx and SO2 removal from flue-gas mixture in an integrated wet scrubber-electrochemical cell system. Chemosphere, 76 (5). pp. 657-664. ISSN 0045-6535

Murali, K.R. and Matheline, M. and John, R. (2009) Characteristics of brush electrodeposited CdS films. Chalcogenide Letters, 6 (9). pp. 483-490. ISSN 1584-8663

Vasudevan, S. and Lakshmi, J. and Sozhan, G. (2009) Studies on a Mg-Al-Zn Alloy as an Anode for the Removal of Fluoride from Drinking Water in an Electrocoagulation Process. Clean, 37 (4-5). pp. 372-378.

Vasudevan, S. and Lakshmi, J. and Sozhan, G. (2009) Studies on the Removal of Iron from Drinking Water by Electrocoagulation – A Clean Process. Clean , 37 (1). pp. 45-51.

Song, H.W. and Saraswathy, V. and Muralidharan, S. and Lee, C.H. and Thangavel, K. (2009) Corrosion performance of steel in composite concrete system admixed with chloride and various alkaline nitrites. Corrosion Engineering, Science Technology, 44 (6). pp. 408-415. ISSN 1478-422X

Vedalakshmi, R. and Rajagopalan, K. and Palaniswamy, N. (2009) Determination of migration efficiency of amino alcohol based migrating corrosion inhibitor through concrete. Corrosion Engineering, Science and Technology, 44 (1). pp. 20-31.

Soloman, P.A. and Basha, C.A. and Ramamurthi, V. and Koteeswaran, K. and Balasubramanian, N. (2009) Electrochemical Degradation of Remazol Black B Dye Effluent. Clean – Soil, Air, Water, 37 (11). pp. 889-900. ISSN 1863-0650

Vedalakshmi, R. and Manoharan, SP. and Song, HW. (2009) Application of harmonic analysis in measuring the corrosion rate of rebar in concrete. Corrosion Science, 51 (11). pp. 2777-2789. ISSN 0010-938X

Rajasekaran, N. and Mohan, S. (2009) Preparation, corrosion and structural properties of Cu–Ni multilayers from sulphate/citrate bath. Corrosion Science, 51 (9). pp. 2139-2143. ISSN 0010-938X

Vedalakshmi, R. and Saraswathy, V. and Song, H.W. and Palaniswamy, N. (2009) Determination of diffusion coefficient of chloride in concrete using Warburg diffusion coefficient. Corrosion Science, 51 (6). pp. 1299-1307. ISSN 0010-938X

Saravanan, G. and Mohan, S. (2009) Corrosion behavior of Cr electrodeposited from Cr(VI) and Cr(III)-baths using direct (DCD) and pulse electrodeposition (PED) techniques. Corrosion Science, 51 (1). pp. 197-202. ISSN 0010-938X

Ashok, K. and Subramanian, B. and Kuppusami, P. and Jayachandran, M. (2009) Effect of substrate temperature on structural and materials properties of zirconium nitride films on D9 steel substrates. Crystal Resistance Technology, 44 (5). pp. 511-516. ISSN 0232-1300

Anandkumar, B. and Rajasekar, A. and Venkatachari, G. and Maruthamuthu, S. (2009) Effect of thermophilic sulphate-reducing bacteria (Desulfotomaculum geothermicum) isolated from Indian petroleum refinery on the corrosion of mild steel. Current Science, 97 (3). pp. 342-348.

Balaji, R. and Kannan, B.S. and Lakshmi, J. and Senthil, N. and Vasudevan, S. and Sozhan, G. and Shukla, A.K. and Ravichandran, S. (2009) An alternative approach to selective sea water oxidation for hydrogen production. Electrochemical Communication, 11 (8). pp. 1700-1702.

Radhakrishnan, S. and Prakash, S. and Rao, C.R.K. and Vijayan, M. (2009) Organically Soluble Bifunctional Polyaniline–Magnetite Composites for Sensing and Supercapacitor Applications. Electrochemical and Solid State Letters, 12 (4). pp. 84-87. ISSN 1099-0062

Prakash, S. and Rao, C.R.K. and Vijayan, M. (2009) Polyaniline–polyelectrolyte–gold(0) ternary nanocomposites: Synthesis and electrochemical properties. Electrochimica Acta, 54 (24). pp. 5919-5927. ISSN 0013-4686

Lee, K.M. and Suryanarayanan, V. and Huang, JH and Thomas, KR.J. and Lin, JT and Ho, KC (2009) Enhancing the performance of dye-sensitized solar cells based on an organic dye by incorporating TiO2 nanotube in a TiO2 nanoparticle film. Electrochimica Acta, 54 (16). pp. 4123-4130. ISSN 0013-4686

Vasudevan, S. and Lakshmi, J. and Sozhan, G. (2009) Optimization of the process parameters for the removal of phosphate from drinking water by electrocoagulation. Desalination and Water Treatment, 12 (1-3). pp. 407-414.

Harish, S. and Sridharan, D. and Senthil Kumar, S. and James, J. and Phani, K.L.N. (2009) Barrier films to control loss of 9,10-anthraquinone-2-sulphonate dopant from PEDOT films during electrochemical transitions. Electrochimica Acta, 54 (13). pp. 3618-3622. ISSN 0013-4686

Raju, T. (2009) A sustainable mediated electrochemical process for the abatement of NOx from simulated flue gas by using Ag(I)/Ag(II) redox mediators. Electrochimica Acta, 54 (12). pp. 3467-3472. ISSN 0013-4686

Minakshi, M. and Mitchell, R.G.D. and Carter, M.L. and Appadoo, D. and Kalaiselvi, N. (2009) Microstructural and spectroscopic investigations into the effect of CeO2 additions on the performance of a MnO2 aqueous rechargeable battery. Electrochimica Acta, 54 (12). pp. 3244-3249. ISSN 0013-4686

Zaheena, C.N. and Nithya, C. and Thirunakaran, R. and Sivashanmugam, A. and Gopukumar, S. (2009) Microwave assisted synthesis and electrochemical behaviour of LiMg0.1Co0.9O2 for lithium rechargeable batteries. Electrochimica Acta, 54 (10). pp. 2877-2882. ISSN 0013-4686

Raju, M. and Ananth, M.V. and Vijayaraghavan, L. (2009) Electrochemical properties of MmNi3.03Si0.85Co0.60Mn0.31Al0.08 hydrogen storage alloys in alkaline electrolytes—A cyclic voltammetric study at different temperatures. Electrochemica Acta, 54 (4). pp. 1368-1374.

Mohanapriya, S. and Bhat, S.D. and Sahu, AK. and Pitchumani, S. and Sridhar, P. and Shukla, A.K. (2009) A new mixed-matrix membrane for DMFCs. Energy & Environmental Science, 2 (11). pp. 1210-1216. ISSN 1754-5692

Choudhury, NA. and Sampath, S. and Shukla, A.K. (2009) Hydrogel-polymer electrolytes for electrochemical capacitors: an overview. Energy & Environmental Science, 2 (1). pp. 55-67. ISSN 1754-5692

Raj, A.M.E. and Resima, L.B. and Jothy, V.B. and Jayachandran, M. and Sanjeeviraja, C. (2009) Ultrasonic study on binary mixture containing dimethylformamide and methanol over the entire miscibility range (0<x<1) at temperatures 303–323K. Fluid Phase Equilibria, 281 (1). pp. 78-86. ISSN 0378-3812

Sahu, AK. and Pitchumani, S. and Sridhar, P. and Shukla, A.K. (2009) Co-assembly of aNafion–Mesoporous ZirconiumPhosphate Composite Membrane for PEM Fuel Cells. Fuel Cells, 9 (2). pp. 139-147. ISSN 1615-6846

Khadke, P.S. and Pitchumani, S. and Palanivelu, K. and Sridhar, P. and Shukla, A.K. (2009) A Self-Supported Direct Borohydride-Hydrogen Peroxide Fuel Cell System. Energies, 2 (2). pp. 190-201.

Prabhakaran, D. and Kannadasan, T. and Basha, C.A. (2009) Treatability of resin effluents by electrochemical oxidation using batch recirculation reactor. International Journal for Environmental Science and Technology, 6 (3). pp. 491-498.

Raju, M. and Ananth, M.V. and Vijayaraghavan, L. (2009) Rapid charging characterization of MmNi3.03Si0.85Co0.60Mn0.31Al0.08 alloy used as anodes in Ni–MH batteries. International Journal of Hydrogen Energy, 34 (8). p. 35003505.

Nathirabegum, S. and Muralidharan, V.S. and Basha, C.A. (2009) The influences of some additives on electrochemical behaviour of nickel electrodes. International Journal of Hydrogen Energy , 34 (3). pp. 1548-1555. ISSN 0360-3199

Ananth, M.V. and Giridhar, V.V. and Renuga, K. (2009) Linear sweep voltametry studies on oxygen reduction of some oxides in alkaline electrolytes. International Journal of Hydrogen Energy , 34 (2). pp. 658-664. ISSN 0360-3199

Ananth, M.V. and Ganesan, M. and Renganathan, N.G. and Lakshmi, S. (2009) Influence of rare earth content on electrode kinetics in Misch metal-based AB5 MH alloys – Cyclic voltammetric investigations. International Journal of Hydrogen Energy , 34 (1). pp. 356-362. ISSN 0360-3199

Basha, C.A. and Soloman, P.A. and Velan, M. and Balasubramanian, N. and Kareem, L.R. (2009) Participation of Electrochemical Steps in Treating Tannery Wastewater. Industrial and Engineering Chemistry Research, 48 (22). pp. 9786-9796. ISSN 0888-5885

Berchmans, L.J. and Bharathi, B. and Amalajyothi, K. and Subramanian, K. (2009) Synthesis of Nanocrystalline Boron Nitride by Combustion Process. International Journal of Self-Propagating High-Temperature Synthesis, 18 (1). pp. 34-37.

Berchmans, L.J. and Devi, M.P.I. and Amalajyothi, K. (2009) Novel Combustion Synthesis of La3+-Substituted MnFe2O4. International Journal of Self-Propagating High-Temperature Synthesis, 18 (1). pp. 11-14.

Devadoss, V. and Basha, C.A. and Jayaraman, K. (2009) Direct Oxidation of Dimethylsulphoxide and Reduction of Maleic Acid in Methanesulphonic Acid Medium. International Journal of Chemical Reactor Engineering, 7 (37). ISSN 1542-6580

Murali, K.R. and Thirumoorthy, P. and Sengodan, V. (2009) Pulse plated cadmium telluride films and their characteristics. Ionics, 15 (2). pp. 209-213.

Karthikeyan, K. and Kalpana, D. and Renganathan, N.G. (2009) Synthesis and characterization of ZnCo2O4 nanomaterial for symmetric supercapacitor applications. Ionics, 15 (1). pp. 107-110. ISSN 0947-7047

Vatsalarani, J. and Kalaiselvi, N. and Karthikeyan, R. (2009) Effect of mixed cations in synergizing the performance characteristics of PVA-based polymer electrolytes for novel category Zn/AgO polymer batteries—a preliminary study. Ionics, 15 (1). pp. 97-105. ISSN 0947-7047

Srinivasan, K.N. and John, S. (2009) Electroless nickel deposition from methane sulfonate bath. Journal of Alloys and Compounds, 486 (1-2). pp. 447-450. ISSN 0925-8388

Bosco, E. and Thomas, S. and Raghuvaran, G. and Sherwood, D. (2009) Simulated XRD profiles of carbon nanotubes (CNTs): An efficient algorithm and a recurrence relation for characterising CNTs. Journal of Alloys and Compounds, 479 (1-2). pp. 484-488.

Minakshi, M. and Kalaiselvi, N. and Mitchell, DRG. (2009) Electrochemical characterization of an aqueous lithium rechargeable battery: The effect of CeO2 additions to the MnO2 cathode. Journal of Alloys and Compounds, 479 (1-2). pp. 87-90.

Raju, M. and Ananth, M.V. and Vijayaraghavan, L. (2009) Influence of electroless coatings of Cu, Ni–P and Co–P on MmNi3.25Al0.35Mn0.25Co0.66 alloy used as anodes in Ni–MH batteries. Journal of Alloys and Compounds, 475 (1-2). pp. 664-671. ISSN 0925-8388

Ganesan, M. (2009) Studies on the effect of titanium addition on LiCoO2. Ionics, 15 (5). pp. 609-614. ISSN 0947-7047

Nathirabegum, S. and Muralidharan, V.S. and Basha, C.A. (2009) Electrochemical investigations and characterization of a metal hydride alloy (MmNi3.6Al0.4Co0.7Mn0.3) for nickel metal hydride batteries. Journal of Alloys and Compounds, 467 (1-2). pp. 124-129. ISSN 0925-8388

Senthilkumar, S. and Firozbabu, K. and Noel, M. and Anbukulandainathan, M. (2009) Redox mediated electrochemical method for vat dyeing in ferric-oxalate-gluconate system: process optimization studies. Journal of Applied Electrochemistry, 39 (12). pp. 2569-2577. ISSN 0021-891X

Rajasekaran, N. and Mohan, S. (2009) Structure, microstructure and corrosion properties of brush-plated Cu–Ni alloy. Journal of Applied Electrochemistry, 39 (10). pp. 1911-1916.

Saravanan, G. and Mohan, S. (2009) Pulsed electrodeposition of microcrystalline chromium from trivalent Cr-DMF bath. Journal of Applied Electrochemistry, 39 (8). pp. 1393-1397. ISSN 0021-891X

Firozbabu, K. and Senthilkumar, R. and Anbukulandainathan, M. and Noel, M. (2009) Ferric-oxalate-gluconate based redox mediated electrochemical system for vat dyeing. Journal of Applied Electrochemistry, 39 (7). pp. 1025-1031. ISSN 0021-891X

Azarudeen, R.S. and Ahmed, M.A.R. and Jeyakumar, D. and Burkanudeen, A.R. (2009) An Eco-friendly Synthesis of A Terpolymer Resin: Characterization and Chelation Ion-exchange Property. Iranian Polymer Journal, 18 (10). pp. 821-832.

Ganesan, M. (2009) Synthesis and characterization of lithium holmium silicate solid electrolyte for high temperature lithium batteries. Journal of Applied Electrochemistry, 39 (6). pp. 947-951. ISSN 0021-891X

Anandhakumar, S. and Sripriya, R. and Chandrasekaran, M. and Govindu, S. and Noel, M. (2009) Electrocarboxylation and related radical coupling processes of aryl and benzyl halides in microemulsion. Journal of Applied Electrochemistry, 39 (3). pp. 463-465. ISSN 0021-891X

Jeyabharathi, C. and Mathiyarasu, J. and Phani, K.L.N. (2009) Methanol tolerant oxygen-reduction activity of carbon supported platinum–bismuth bimetallic nanoparticles. Journal of Applied Electrochemistry, 39 (1). pp. 45-53. ISSN 0021-891X

Song, H.W. and Saraswathy, V. and Muralidharan, S. and Lee, C.H. and Thangavel, K. (2009) Role of alkaline nitrites in the corrosion performance of steel in composite cements. Journal of Applied Electrochemistry, 39 (1-2). pp. 45-53. ISSN 0021-891X

Bhat, S.D. and Manokaran, A. and Sahu, A.K. and Pitchumani, S. and Sridhar, P. and Shukla, A.K. (2009) Novel Self-Supported Natural and Synthetic Polymer Membranes for Air Humidification. Journal ofAppliedPolymer Science, 113 (4). pp. 2605-2612.

Geetha, S. and Satheesh Kumar, K.K. and Rao, R.K. and Vijayan, M. and Trivedi, D.C. (2009) EMI Shielding: Methods and Materials—A Review. Journal of Applied Polymer Science, 112 (4). pp. 2073-2086. ISSN 0021-8995

Bhandari, H. and Sathiyanarayanan, S. and Choudhary, V. and Dhawan, S.K. (2009) Synthesis and Characterization of Proccessible Polyaniline Derivatives for Corrosion Inhibition. Journal of Applied Polymer Science, 111 (5). pp. 2328-2339. ISSN 0021-8995

Selvakumar, M. and Bhat, D.K. and Renganathan, N.G. (2009) Miscibility of Polymethylmethacrylate and Polyethyleneglycol Blends in Tetrahydrofuran. Journal of Applied Polymer Science, 111 (1). pp. 452-460. ISSN 0021-8995

Sampath, S. and Choudhury, N.A. and Shukla, A.K. (2009) Hydrogel membrane electrolyte for electrochemical capacitors. Journal of Chemical Sciences, 121 (5). pp. 727-734. ISSN 0974-3626

Varatharajan, S. and Sheela, B. and Yegnaraman, V. (2009) Tailoring self-assembled monolayers at the electrochemical interface. Journal for Chemical Science, 121 (5). pp. 665-674.

Choudhury, N.A. and Prashant, S.K. and Pitchumani, S. and Sridhar, P. and Shukla, A.K. (2009) Poly (vinyl alcohol) hydrogel membrane as electrolyte for direct borohydride fuel cells. Journal of Chemical Sciences, 121 (5). pp. 647-654. ISSN 0974-3626

Soloman, P.A. and Basha, C.A. and Velan, M. and Balasubramanian, N. (2009) Electrochemical degradation of pulp and paper industry waste-water. Journal of Chemical Technology & Biotechnology, 87 (9). pp. 1303-1313.

Chandrasekara Pillai, K. and Raju, T. and Chung, S.J. and Moon, I.S. (2009) Removal of H2S using a new Ce(IV) redox mediator by amediated electrochemical oxidation process. Journal of Chemical Technology and Biotechnology, 84 (3). pp. 447-453.

Suryanarayanan, V. and Lee, K.M. and Chen, J.G. and Ho, K.C. (2009) High performance dye-sensitized solar cells containing 1-methyl-3-propyl imidazolinium iodide-effect of additives and solvents. Journal of Electroanalytical Chemistry, 633 (1). pp. 146-152. ISSN 1572-6657

Ilayaraja, M. and Noel, M. (2009) A comparative study of anodic fluorination of N-alkyl and N,N-dialkyl phenylacetamides in Et3N 4HF medium. Journal of Electroanalytical Chemistry, 632 (1-2). pp. 45-54. ISSN 1572-6657

Manu, R. and Shoba, J. (2009) Influence of Additives and the Effect of Aging in Modifying Surface Topography of Electrodeposited Copper. Journal of the Electrochemical Society, 456 (7). pp. 215-221. ISSN 0013-4651

Sathiyanarayanan, S. and Jeyaram, R. and Muthukrishnan, S. and Venkatachari, G. (2009) Corrosion Protection Mechanism of Polyaniline Blended Organic Coating on Steel. Journal of Electrochemical Society, 156 (4). pp. 127-134.

Selvarani, G. and Maheswari, S. and Sridhar, P. and Pitchumani, S. and Shukla, A.K. (2009) Carbon-Supported Pt–TiO2 as a Methanol-Tolerant Oxygen-Reduction Catalyst for DMFCs. Journal of the Electrochemical Society, 156 (11). pp. 1354-1360. ISSN 0013-4651

Selvarani, G. and Sahu, A.K. and Kiruthika, G.V.M. and Sridhar, P. and Pitchumani, S. and Shukla, A.K. (2009) PEFC Electrode with Enhanced Three-Phase Contact and Built-in Supercapacitive Behavior. Journal of the Electrochemical Society, 156 (1). pp. 118-125. ISSN 0013-4651

Rajakumar, S. and Thirunakaran, R. and Sivashanmugam, A. and Yamaki, J. and Gopukumar, S. (2009) Electrochemical Behavior of LiM0.25Ni0.25Mn1.5O4 as 5 V Cathode Materials for Lithium Rechargeable Batteries. Journal of the Electrochemical Society, 156 (3). pp. 246-252. ISSN 0013-4651

Gandhi, K.S. and Shukla, A.K. and Maqrtha, S.K. and Gafoor, S.A. (2009) Simplified Mathematical Model for Effects of Freezing on the Low-Temperature Performance of the Lead-Acid Battery. Journal of the Electrochemical Society, 156 (3). pp. 238-245. ISSN 0013-4651

Rameshbabu, B. and Venkatesan, P. and Kanimozhi, R. and Basha, C.A. (2009) Removal of pharmaceuticals from wastewater by electrochemical oxidation using cylindrical flow reactor and optimization of treatment conditions. Journal of Environmental Science and Health, 44 (10). pp. 985-994. ISSN 1093-4529

Ramesh Babu, B. and Udhya Banu, S. and Seeni Meera, K. (2009) Waste Minimization in Electroplating Industries: A Review. Journal of Environmental Science and Health Part C, 27 (3). pp. 155-177. ISSN 1059-0501

Ilayaraja, N. and Velayutham, D. and Noel, M. (2009) Prevention of anode fouling during the electrochemical perfluorination of aromatic carboxylic acid chlorides. Journal of Fluorine Chemistry, 130 (7). pp. 656-661. ISSN 0022-1139

Vasudevan, S. and Lakshmi, J. and Jayaraj, J. and Sozhan, G. (2009) Remediation of phosphate-contaminated water by electrocoagulation with aluminium, aluminium alloy and mild steel anodes. Journal of Hazardous Materials, 164 (2-3). pp. 1480-1486. ISSN 0304-3894

Subramanian, K. and Periasamy, V.M. and Malathy, P. and Ramasamy, K. (2009) Predictive modeling of deposition rate in electro-deposition of copper–tin using regression and artificial neural network. Journal of Electroanalytical Chemistry, 636 (1-2). pp. 30-35.

Cho, J.H. and Maruthamuthu, S. and Lee, H.G. and Ha, T.H. and Bae, J.H. (2009) Nitrate removal by electro-bioremediation technology in Korean soil. Journal of Hazardous Materials, 168 (2-3). pp. 1208-1216. ISSN 0304-3894

Parande, A.K. and Sivashanmugam, A. and Beulah, H. and Palaniswamy, N. (2009) Performance evaluation of low cost adsorbents in reduction of COD in sugar industrial effluent. Journal of Hazardous Materials, 168 (2-3). pp. 800-805. ISSN 0304-3894

Balasubramanian, N. and Kojima, T. and Basha, C.A. (2009) Removal of arsenic from aqueous solution using electrocoagulation. Journal of Hazardous Materials, 167 (1-3). pp. 966-969.

Gomathi Priya, P. and Basha, C.A. and Ramamurthi, V. and Nathira Begum, S. (2009) Recovery and reuse of Ni(II) from rinse water of electroplating industries. Journal of Hazardous Materials, 163 (2-3). pp. 899-909. ISSN 0304-3894

Thilakavathi, R. and Balasubramanian, N. and Basha, C.A. (2009) Modeling electrowinning process in an expanded bed electrode. Journal of Hazardous Materials, 162 (1). pp. 154-160.

Ramesh Babu, B. and Parande, A.K. and Rajalakshmi, R. and Suriyakala, P. and Volga, M. (2009) Management of Biomedical Waste in India and Other Countries: A Review. Journal of International Environmental Application and Science, 4 (1). pp. 65-78.

Sahu, R.K. and Mukherjee, D. and Tiwari, J.P. and Mishra, T. and Roy, S.K. and Pathak, L.C. (2009) Influence of foreign Fe ions on wet chemical synthesis of Pt nanoparticle thin films at ambient temperature: in situ versus direct addition. Journal of Materials Chemistry, 19 (37). pp. 6810-6815. ISSN 0959-9428

Tietz, F. and Arulraj, I. and Fu, Q.X. and Zahid, M. (2009) Investigation of the quasi-ternary system LaMnO3–LaCoO3– ‘‘LaCuO3’’. II: The series LaMn0.252xCo0.752xCu2xO32d and LaMn0.752xCo0.252xCu2xO32d. Journal of Materials Science, 44 (14). pp. 4883-4891. ISSN 0022-2461

Subramanian, B. and Ibrahim, M. and Murali, K.R. and Vidhya, V.S. and Sanjeeviraja, C. and Jayachandran, M. (2009) Structural, optoelectronic and electrochemical properties of nickel oxide films. Journal of Materials Science: Materials in Electronics, 20 (10). pp. 953-957. ISSN 0957-4522

Murali, K.R. and Thirumoorthy, P. and Sengodan, V. (2009) Photoelectrochemical behaviour of pulse plated CdS films. Journal of Materials Science: Materials in Electronics, 20 (3). pp. 206-211. ISSN 0957-4522

Murali, K.R. and Austine, A. (2009) Photoelectrochemical properties of brush plated CdxZn1-xSe films. Journal of Materials Science: Materials in Electronics, 20 (1). pp. 92-97. ISSN 0957-4522

Bhat, S.D. and Sahu, A.K. and George, C. and Pitchumani, S. and Sridhar, P. and Chandrakumar, N. and Singh, K.K. and Krishna, N. and Shukla, A.K. (2009) Mordenite-incorporated PVA–PSSA membranes as electrolytes for DMFCs. Journal of Membrane Science, 340 (1-2). pp. 73-83. ISSN 0376-7388

Jose, T.P. and Sundar, L. and Berchmans, L.J. and Visuvasam, A. and Angappan, S. (2009) Electrochemical synthesic and characterization of BaB6 from molten melt. Journal of Mining and Metallurgy, 45B (1). pp. 101-109. ISSN 1450-5339

Malathy, V. and Sivaranjani, S. and Vidhya, V.S. and Joseph Prince, J. and Balasubramanian, T. and Sanjeeviraja, C. and Jayachandran, M. (2009) Amorphous to crystalline transition and optoelectronic properties of nanocrystalline indium tin oxide (ITO) films sputtered with high rf power at room temperature. Journal of Non-Crystalline Solids, 355 (28-30). pp. 1508-1516.

Lee, KM. and Suryanarayanan, V. and Ho, KC. (2009) High efficiency quasi-solid-state dye-sensitized solar cell based on polyvinyidene fluoride-co-hexafluoro propylene containing propylene carbonate and acetonitrile as plasticizers. Journal of Photochemistry and Photobiology A:Chemistry, 207 (2-3). pp. 224-230. ISSN 1010-6030

Stephen, A.M. and Premkumar, T. and Anbukulandainathan, M. and Angulakshmi, N. (2009) Chitin-Incorporated Poly(ethylene oxide)-Based Nanocomposite Electrolytes for Lithium Batteries. Journal of Physical Chemistry B, 113 (7). pp. 1963-1971. ISSN 1520-6106

Nithya, C. and Thirunakaran, R. and Sivashanmugam, A. and Krithika, G.V.M. and Gopukumar, S. (2009) High-Capacity Sol-Gel Synthesis of LiNixCoyMn1-x-yO2 (0 e x, y e 0.5) Cathode Material for Use in Lithium Rechargeable Batteries. Journal of Physical Chemistry C, 113 (41). pp. 17936-17344. ISSN 1932-7447

Arunkumar, P. and Sheela, B. and Yegnaraman, V. (2009) Self-Assembled Monolayers As Nucleating Centers for the Preparation of Multilayers of Catalytically Active Pt Films. Journal of Physical Chemistry, 113 (19). pp. 8378-8386.

Selvarani, G. and Vinod Selvaganesh, S. and Krishnamurthy, S. and Krruthika, G.V.M. and Sridhar, P. and Pitchumani, S. and Shukla, A.K. (2009) A Methanol-Tolerant Carbon-Supported Pt-Au Alloy Cathode Catalyst for Direct Methanol Fuel Cells and Its Evaluation by DFT. Journal of Physical Chemistry C, 113 (17). pp. 7461-7468. ISSN 1932-7447

De, H.S. and Sailaja, K. and Pal, S. (2009) Density Functional Investigation of Relativistic Effects on the Structure and Reactivity of Tetrahedral Gold Clusters. Journal of Physical Chemistry C, 113 (17). pp. 7101-7106.

Kalpana, D. and Lee, Y.S. and Sato, Y. (2009) New, low-cost, high-power poly(o-anisidine-co-metanilic acid)/activated carbon electrode for electrochemical supercapacitors. Journal of Power Source, 190 (2). pp. 592-595.

Kalpana, D. and Cho, S.H. and Lee, S.B. and Lee, Y.S. and Misra, R. and Renganathan, N.G. (2009) Recycled waste paper—A new source of raw material for electric double-layer capacitors. Journal of Power Sources, 190 (2). pp. 587-591.

Veluchamy, A. and Doha, C.H. and KIma, D.H. and Lee, J.H. and Shina, H.M. and Jin, B.S. and KIma, H.S. and Moon, S.I. (2009) Thermal analysis of LixCoO2 cathode material of lithium ion battery. Journal of Power Sources, 189 (1). pp. 855-858.

Lee, K.M. and Suryanarayanan, V. and Ho, K.C. (2009) Influences of different TiO2 morphologies and solvents on the photovoltaic performance of dye-sensitized solar cells. Journal of Power Sources, 188 (2). pp. 635-641.

Veluchamy, A. and Doh, C.H. and Kim, D.H. and Lee, J.H. and Lee, D.J. and Gad, J,G, and Shina, H.M. and Jin, B.S. and Kim, H.S. and Moon, S.I. and Parke, C.W. (2009) Improvement of cycle behaviour of SiO/C anode composite by thermochemically generated Li4SiO4 inert phase for lithium batteries. Journal of Power Sources, 188 (2). pp. 574-577.

Thirunakaran, R. and Sivashanmugam, A. and Gopukumar, S. and Rajalakshmi, R. (2009) Cerium and zinc: Dual-doped LiMn2O4 spinels as cathode material for use in lithium rechargeable batteries. Journal of Power Sources, 187 (2). pp. 565-574. ISSN 0378-7753

Senthil Kumar, S. and Phani, K.L.N. (2009) Exploration of unalloyed bimetallic Au–Pt/C nanoparticles for oxygen reduction reaction. Journal of Power Sources, 187 (1). pp. 19-24.

Boovaragan, V. and Basha, C.A. (2009) Optimal time-varying potential profile for electro-hydro-dimerization reactions. Journal of Process Control, 19 (2). pp. 241-246.

Gangulibabu, . and Bhuvaneswari, D. and Kalaiselvi, N. and Jayaprakash, N. and Periasamy, P. (2009) CAM sol–gel synthesized LiMPO4 (M=Co, Ni) cathodes for rechargeable lithium batteries. Journal of Sol-Gel Science and Technology, 49 (2). pp. 137-144.

Suryanarayanan, V. and Noel, M. (2009) A comparative evaluation on the anodic behavior of Cu and Ag electrodes in non-aqueous fluoride and fluoroborate media. Journal of Solid State Electrochemistry, 13 (12). pp. 1913-1923. ISSN 1432-8488

Chandrasekar, M.S. and Shanmugasigamani, S. and Malathy, P. (2009) Properties of Zinc alloy electrodeposits produced from acid and alkaline electrolytes. Journal of Solid State Electrochemistry, 13 (5). pp. 781-789. ISSN 1432-8488

Vasudevan, S. (2009) Optimization of the process parameters for an electrochemical preparation of strontium perchlorate. Korean Journal of Chemical Engineering, 26 (5). pp. 1246-1251. ISSN 0256-1115

Raju, T. and Chung, S.J. and Moon, I.S. (2009) Electrochemical recovery of silver from waste aqueous Ag(I)/Ag(II) redox mediator solution used in mediated electro oxidation process. Korean Jouurnal of Chemical Engineering, 26 (4). pp. 1053-1057.

Chandrasekar, M.S. and Shanmugasigamani, S. and Malathy, P. (2009) Morphology and texture of pulse plated zinc–cobalt alloy. Materials Chemistry and Physics, 115 (2-3). pp. 603-611. ISSN 0254-0584

Muthukumar, N. and Ilangovan, A. and Maruthamuthu, S. and Palanisamy, N. and Kimura, A. (2009) 1-Aminoanthraquinone derivatives as a novel corrosion inhibitor for carbon steel API 5L-X60 in white petrol–water mixtures. Materials Chemistry and Physics, 115 (1). pp. 444-452. ISSN 0254-0584

Jisha, M.R. and Hwanga, Y.J. and Shin, J.S. and Nahm, K.S. and Premkumar, T. and Karthikeyan, K. and Dhanikaivelu, N. and Kalpana, D. and Renganathan, N.G. and Stephan, A.M. (2009) Electrochemical characterization of supercapacitors based on carbons derived from coffee shells. Materials Chemistry and Physics, 115 (1). pp. 33-39. ISSN 0254-0584

Anandakumar, B. and Cho, J.H. and Venkatachari, G. and Maruthamuthu, S. (2009) Molecular characterization and corrosion behavior of thermophilic (55 8C) SRB Desulfotomaculum kuznetsovii isolated from cooling tower in petroleum refinery. Materials and Corrosion, 60 (9). pp. 730-737.

Berchmans, L.J. and Leena, V. and Amalajyothi, K. and Angappan, S. and Visuvasam, A. (2009) Preparation of Lanthanum Ferrite Substituted with Mg and Ca. Materials and Manufacturing Processes, 24 (5). pp. 546-549.

Poongothai, N. and Ramachanderen, T. and Natesan, M. and Murugavel, S.C. (2009) Corrosion Inhibition of Mild Steel by Essential Oils in an HCl Environment. Materials Performance, 48 (9). pp. 52-56.

Sathiya, M. and Prakash, A.S. and Ramesha, K. and Shukla, A.K. (2009) Rapid synthetic routes to prepare LiNi1/3Mn1/3Co1/3O2 as a high voltage high-capacity Li-ion battery cathode material. Materials Research Bulletin, 44 (10). pp. 1990-1994. ISSN 0025-5408

Harish, S. and Mathiyarasu, J. and Phani, K.L.N. (2009) Generation of gold–PEDOT nanostructures at an interface between two immiscible solvents. Materials Research Bulletin, 44 (9). pp. 1828-1833. ISSN 0025-5408

Ragavendran, K. and Vasudevan, D. and Emmanuel, B. (2009) Electric field induced enhancement in the interfacial charge transfer kinetics of a solid polymer electrolyte. Materials Science and Engineering B, 156 (1-3). pp. 94-96. ISSN 0921-5107

Maruthamuthu, S. and Dhandapani, P. and Ponmariappan, S. and Bae, J.H. and Palaniswamy, N. and Rahman, P.K.S.M. (2009) Impact of Ammonia Producing Bacillus sp. on Corrosion of Cupronickel alloy 90:10. Met. Mater. Int., 15 (3). pp. 409-419.

Ramamurthi, V. and Gomathipriya, P. and Saranya, S. and Basha, C.A. (2009) Recovery of Nickel (I) Ions from Electroplating Rinse Water Using Hectorite Clay. Modern Applied Science, 3 (9). pp. 37-51. ISSN 1913-1844

Murali, K.R. and Sivaramamoorthy, K. and Kottaisamy, M. and Asathbahadur, S. (2009) Photoconductive studies on electron beam evaporated CdSe films. Physica B: Condensed Matter, 4047 (16). pp. 2449-2454. ISSN 0921-4526

Ragavendran, K. and Sherwood, D. and Vasudevan, D. and Emmanuel, B. (2009) On the observation of a huge lattice contraction and crystal habit modifications in LiMn2O4 prepared by a fuel assisted solution combustion. Physica B: Condensed Matter, 404 (16). pp. 2166-2171. ISSN 0921-4526

Ragavendran, K. and Sherwood, D. and Emmanuel, B. (2009) Observation of self-regulating response in LixMyMn2-yO4 (M = Mn, Ni): A study using density functional theory. Physica B: Condensed Matter, 404 (2). pp. 248-250. ISSN 0921-4526

Vuorema, A. and John, P. and Keskitalo, M. and Mahon, M.F. and Anbukulandainathan, M. and Marken, F. (2009) Anthraquinone catalysis in the glucose-driven reduction of indigo to leuco-indigo. Physical Chemistry Chemical Physics, 11 (11). pp. 1816-1824. ISSN 1463-9076

Subramanian, K. and Periasamy, V.M. and Pushpavanam, M. and Ramasamy, K. (2009) Predictive Modeling of Copper in Electro-deposition of Bronze Using Regression and Neural Networks. Portugaliae Electrochimica Acta, 27 (1). pp. 47-55. ISSN 0872-1904

Divakara, S. and Madhu, S. and Somashekar, R. (2009) Stacking faults and microstructural parameters in non-mulberry silk fibres. Pramana - Journal of Physics, 73 (5). pp. 927-938. ISSN 0304-4289

Selvaraj, M. and Sathiyanarayanan, S. and Muthukrishnan, S. and Venkatachari, G. (2009) Corrosion protective performance studies of coating systems in soda ash chemical industry. Progress in Organic Coatings, 66 (3). pp. 206-212. ISSN 0021-8995

Sathiyanarayanan, S. and Maruthan, K. and Muthukrishnan, S. and Venkatachari, G. (2009) High performance polyaniline containing coating system for wet surfaces. Progress in Organic Coatings, 66 (2). pp. 113-117. ISSN 0021-8995

Sathiyanarayanan, S. and Azim, S.S. and Venkatachari, G. (2009) Corrosion protection of galvanized iron by polyaniline containing wash primer coating. Progress in Organic Coatings, 65 (1). pp. 152-157. ISSN 0021-8995

Kamaraj, K. and Sathiyanarayanan, S. and Muthukrishnan, S. and Venkatachari, G. (2009) Corrosion protection of iron by benzoate doped polyaniline containing coatings. Progress in Organic Coatings, 64 (4). pp. 460-465. ISSN 0021-8995

Selvaraj, R. and Selvaraj, M. and Iyer, S.V.K. (2009) Studies on the evaluation of the performance of organic coatings used for the prevention of corrosion of steel rebars in concrete structures. Progress in Organic Coatings, 64 (4). pp. 454-459. ISSN 0021-8995

Choi, J.H. and Maruthamuthu, S. and Lee, H.G. and Ha, T.H. and Bae, J.H. (2009) Electrochemical Studies on the Performance of SS316L Electrode in Electrokinetics. Metal and Materials International, 15 (5). pp. 771-781.

Kamaraj, K. and Sathiyanarayanan, S. and Venkatachari, G. (2009) Electropolymerised polyaniline films on AA 7075 alloy and its corrosion protection performance. Progress in Organic Coatings, 64 (1). pp. 67-73. ISSN 0021-8995

Soloman, P.A. and Basha, C.A. and Velan, M. and Balasubramanian, N. and Marimuthu, P. (2009) Augmentation of biodegradability of pulp and paper industry wastewater by electrochemical pre-treatment and optimization by RSM. Separation and Purification Technology, 69 (1). pp. 109-117. ISSN 1383-5866

Ha, T.H. and Choi, J.H. and Maruthamuthu, S. and Lee, H.G. and Bae, J.H. (2009) Evaluation of EK system by DC and AC on removal of nitrate complex. Separation Science and Technology, 44 (10). pp. 2269-2283. ISSN 0149-6395

Murali, K.R. and Thirumoorthy, P. and Kannan, C. and Sengodan, V. (2009) Pulse plated CdSxTe1-x films and their properties. Solar Energy, 83 (1). pp. 14-20. ISSN 0038-092X

Vedalakshmi, R. and Dolli, H. and Palaniswamy, N. (2009) Embeddable corrosion rate-measuring sensor for assessing the corrosion risk of steel in concrete structures. Structural Control and Health Monitoring, 16 (4). pp. 441-459. ISSN 1545-2255

Mohan, S. and Rajasekaran, N. (2009) Pulse electrodeposition of tin from sulphate bath. Surface Engineering, 25 (8). pp. 634-638. ISSN 0267-0844

Mohan, S. and Vijayakumar, J. and Saravanan, G. (2009) Influence of CH3SO3H and AlCl3 in direct and pulse current electrodeposition of trivalent chromium. Surface Engineering, 25 (8). pp. 570-576. ISSN 0267-0844

Sivakumar, R. and Shanthakumari, K. and Thayumanavan, A. and Jayachandran, M. and Sanjeeviraja, C. (2009) Molybdenum oxide (MoO3) thin film based electrochromic cell characterisation in 0.1 M LiClO4.PC electrolyte. Surface Engineering, 25 (7). pp. 548-554. ISSN 0267-0844

Subramanian, B. and Ashok, K. and Subramanian, K. and Sastikumar, D. and Selvan, G. and Jayachandran, M. (2009) Evaluation of corrosion and wear resistance titanium nitride (TiN) coated on mild steel (MS) with brush plated nickel interlayer. Surface Engineering, 25 (7). pp. 490-495. ISSN 0267-0844

Balasubramanian, A. and Srikumar, D.S. and Raja, G. and Saravanan, G. and Mohan, S. (2009) Effect of pulse parameter on pulsed electrodeposition of copper on stainless steel. Surface Engineering, 25 (5). pp. 389-392. ISSN 0267-0844

Kulangiappar, K. and Karthik, G. and Anbukulandainathan, M. (2009) Electrochemical Method for the Preparation of Dibromomethyl, Bis(bromomethyl), and Bis(dibromomethyl) Arenes. Synthetic Communications, 39 (13). pp. 2304-2309. ISSN 0039-7911

Subramanian, B. and Govindan, K. and Swaminathan, V. and Jayachandran, M. (2009) Materials properties of electrodeposited NiFe and NiCoFe coatings. Transactions of the Institute of Metal Finishing, 87 (6). pp. 325-329. ISSN 0020-2967

Ilayaraja, M. and Mohan, S. and Gnanamuthu, R.M. and Saravanan, G. (2009) Nanocrystalline zinc–nickel alloy deposition using pulse electrodeposition (PED) technique. Transactions of the Institute of Metal Finishing, 87 (3). pp. 145-148. ISSN 0020-2967

Mohan, S. and Ravindran, V. and Subramanian, B. and Saravanan, G. (2009) Electrodeposition of zinc–nickel alloy by pulse plating using non-cyanide bath. Transactions of the Institute of Metal Finishing, 87 (2). pp. 85-89. ISSN 0020-2967

Amalajyothi, K. and Berchmans, L.J. (2009) Combustion synthesis of nanocrystalline cerium hexaboride using citric acid as a fuel. International Journal of Self-Propagating High-Temperature Synthesis, 18 (3). pp. 151-153. ISSN 1061-3862

Berchmans, L.J. and Mani, V. and Amalajyothi, K. (2009) Synthesis of Boron Carbide by Calciothermic Reduction Process. International Journal of Self-Propagating High-Temperature Synthesis, 18 (1). pp. 60-63. ISSN 1061-3862

Sheela, B. and Vergheese, T.M. and Kavitha, A.L. and Manoj, V. and Yegnaraman, V. (2008) Electrochemical preparation of copper–dendrimer nanocomposites: picomolar detection of Cu2+ ions. Anal Bioanal Chem, 390. pp. 939-946.

Anwar, S. and Lalla, N.P. (2008) Effect of oxygenation on the structural and dielectric properties of Sr1−xCaxTiO3 with 0.20ÏxÏ0.40. Applied Physics Letters, 92 (21). pp. 212901-1.

Murugan, P. and Kumar, V. and Kawazoe, Y. and Ota, N. (2008) Lithiated assemblies of metal chalcogenide nanowires. Applied Physics Letters, 92 (20). pp. 203112-1.

Subramanian, B. and Ashok, K. and Jayachandran, M. (2008) Effect of substrate temperature on the structural properties of magnetron sputtered titanium nitride thin films with brush plated nickel interlayer on mild steel. Applied Surface Science, 255 (5). pp. 2133-2138.

Premkumar, P. and Kannan, K. and Natesan, M. (2008) Thyme extract of thymus vulgar L. as volatile corrosion inhibitor for mild steel in NaCl environment. Asian Journal of Chemistry, 20 (1). pp. 445-451.

George, R.P. and Gopal, J. and Muraleedharan, P. and Anandkumar, B. and Baskaran, R. and Maruthamuthu, S. and Dayal, R.K. (2008) Studies on enhancement of biofilm formation and adherence due to mechanical treatment of titanium surfaces in cooling-water systems. Biofilms. pp. 1-7.

Eashwar, M. and Nallathambi, T. and Kuberaraj, K. (2008) Short communication On microalgal settlements and the sluggish development of marine biofouling in Port Blair waters,Andamans. Biofouling, 24 (1). pp. 67-73.

Doh, C.H. and Shin, H.M. and Kim, D.H. and Chung, Y.D. and Moon, S.I. and Jin, B.S. and Kim, H.S. and Kim, K.W. and Oh, D.H. and Veluchamy, A. (2008) Effect of silicon content over Fe-Cu-Si/C Based Composite Anode for Lithium Ion Battery. Bull. Korean Chem. Soc., 29 (2). pp. 309-312.

Murali, K.R. and Thilakvathy, K. and Vasantha, S. and Ooomen, R. (2008) Properties OF ZnSe films pulse plated on high temperature substrates. Chalcogenide Letters, 5 (6). pp. 111-116.

Saravanathamizhan, R. and Soloman, P.A. and Balasubramanian, N. and Basha, C.A. (2008) Optimization of In-situ Electro-oxidation of Formaldehyde by the Response SurfaceMethod. Chem. Biochem. Eng., 22 (2). pp. 213-220.

Saravanathamizhan, R. and Paranthaman, R. and Balasubramanian, N. and Basha, C.A. (2008) Residence time distribution in continuous stirred tank electrochemical reactor. Chemical Engineering Journal, 142 (2). pp. 209-216.

Basha, C.A. and Josephine Selvi, S. and Ramasamy, E. and Chellammal, S. (2008) Removal of arsenic and sulphate from the copper smelting industrial effluent. Chemical Engineering Journal, 141 (1-3). pp. 89-98.

Porkodi, P. and Yegnaraman, V. and Kamaraj, P. and Kalyanavalli, V. and Jeyakumar, D. (2008) Synthesis of NASICONsA Molecular Precursor-Based Approach. Chem. Mater., 20 (20). pp. 6410-6419.

Kalaiselvan, R. and Krishnan, V. and Augustin, C.O. and Bertagnolli, H. and Kim, C.S. and Gedanken, A. (2008) Investigations on the Structural, Morphological, Electrical, and Magnetic Properties of CuFe2O4-NiO Nanocomposites. Chem. Mater., 20 (2). pp. 429-439.

Ragavendran, K. and Nakkiran, A. and Kalyani, P. and Veluchamy, A. and Jagannathan, R. (2008) Nickel doped spinel lithium manganate – some insights using opto-impedance. Chemical Physics Letters, 456 (1-3). pp. 110-115.

Raju, T. and Chung, S.J. and Chandrasekara Pillai, K. and Moon, I.S. (2008) Simultaneous Removal of NOxand SO2: A Promising Ag(II)/Ag(I) Based Mediated Electrochemical Oxidation System. Clean, 36 (5-6). pp. 476-481.

Ganesan, K. and Rajagopal, K. and Thangavel, K. (2008) Rice husk ash blended cement: Assessment of optimal level of replacement for strength and permeability properties of concrete. Construction and Building Materials, 22 (8). pp. 1675-1683.

Vedalakshmi, R. and Rajagopal, K. and Palaniswamy, N. (2008) Longterm corrosion performance of rebar embedded in blended cement concrete under macro cell corrosion condition. Construction and Building Materials, 22 (3). pp. 186-199.

Parande, A.K. and Rameshbabu, B. and Karthik, M.A. and Deepakkumaar, K.K. and Palaniswamy, N. (2008) Study on strength and corrosion performance for steel embedded in metakaolin blended concrete/mortar. Construction and Building Materials, 22 (3). pp. 127-134.

Parthiban, G.T. and Thirumalai, P. and Ravi, R. and Saraswathy, V. and Palaniswamy, N. and Sivan, V. (2008) Cathodic protection of steel in concrete using magnesium alloy anode. Corrosion Science, 50 (12). pp. 3329-3335.

Sathiyapriya, A.R. and Muralidharan, V.S. and Subramanian, A. (2008) Development of Novel Acidizing Inhibitors for Carbon Steel Corrosion in 15% Boiling Hydrochloric Acid. Corrosion, 64 (6). pp. 541-552.

Natesan, M. and Venkatachari, G. and Palaniswamy, N. and Rajeswari, A. (2008) A Novel Approach to Updating the Corrosiveness Maps of India. Corrosion, 64 (2). pp. 92-100.

Moses Ezhil Raj, A. and Deva Jayanthi, D. and Bena Jothy, V. and Jayachandran, M. and Sanjeeviraja, C. (2008) Growth aspects of barium oxalate monohydrate single crystals in gel medium. Cryst. Res. Technol., 43 (12). pp. 1307-1313.

Subramanian, B. and Ashok, K. and Kuppusami, P. and Sanjeeviraja, C. and Jayachandran, M. (2008) Characterization of reactive DC magnetron sputtered TiAlN thin films. Cryst. Res. Technol., 43 (10). pp. 1078-1082.

Anandkumar, B. and Maruthamuthu, S. (2008) Molecular identification and corrosion behaviour of manganese oxidizers on orthodontic wires. Current Science, 94 (7). pp. 891-896.

Maruthamuthu, S. and Muthukumar, N. and Natesan, M. and Palaniswamy, N. (2008) Role of air microbes on atmospheric corrosion. Current Science, 94 (3). pp. 359-363.

Shukla, A.K. and Premkumar, T. (2008) Materials for next-generation lithium batteries. Current Science, 95 (3). pp. 314-331.

Palraj, S. and Venkatachari, G. (2008) Effect of biofouling on Corrosion behaviour of grade 2 titanium in Mandapam seawaters. Desalination, 230 (1-3). pp. 92-99.

Vuorema, A. and John, P. and Keskitalo, M. and Anbukulandainathan, M. and Marken, F. (2008) Electrochemical and sonoelectrochemical monitoring of indigo reduction by glucose. Dyes and Pigments, 76 (2). pp. 542-549.

Kalpana, D. and Karthikeyan, K. and Renganathan, N.G. and Lee, Y.S. (2008) Camphoric carbon nanobeads -A new electrode material for supercapacitors. Electrochemistry Communications, 10 (7). pp. 977-979.

Jayaprakash, N. and Kalaiselvi, N. (2008) Structural and electrochemical investigation of Li2MgSnO4 anode for lithium batteries. Electrochemistry Communications, 10 (6). pp. 891-894.

Jayaprakash, N. and Kalaiselvi, N. and Sun, Y.K. (2008) Combustion synthesized LiMnSnO4 cathode for lithium batteries. Electrochemistry Communications, 10 (3). pp. 455-460.

Doh, C.H. and Shin, H.M. and Kim, D.H. and Ha, Y.C. and Jin, B.S. and Kim, H.S. and Moon, S.I. and Veluchamy, A. (2008) Improved anode performance of thermally treated SiO/C composite with an organic solution mixture. Electrochemistry Communications, 10 (2). pp. 233-237.

Basha, C.A. and Ghosh, P.K. and Gajalakshmi, G. (2008) Total dissolved solids removal by electrochemical ion exchange (EIX) process. Electrochimica Acta, 54 (2). pp. 474-483.

Jeyabharathi, C. and Venkateshkumar, P. and Mathiyarasu, J. and Phani, K.L.N. (2008) Platinum–tin bimetallic nanoparticles for methanol tolerant oxygen-reduction activity. Electrochimica Acta, 54 (2). pp. 448-454.

Raja Kumar, P. and Kalpana, D. and Renganathan, N.G. and Pitchumani, S. (2008) Potentiodynamic deposition of poly (o-anisidine-co-metanilic acid)on mild steel and its application as corrosion inhibitor. Electrochimica Acta, 54 (2). pp. 442-447.

Muralidharan, S. and Saraswathy, V. and Madhavamayandi, A. and Thangavel, K. and Palaniswamy, N. (2008) Evaluation of embeddable potential sensor for corrosion monitoring in concrete structures. Electrochimica Acta, 53 (24). pp. 7248-7254.

Prakash, S. and Rao, C.R.K. and Vijayan, M. (2008) New polyaniline(PAni)-polyelectrolyte (PDDMAC) composites: Synthesis and applications. Electrochimica Acta, 53 (18). pp. 5704-5710.

Chandrasekar, M.S. and Pushpavanam, M. (2008) Pulse and pulse reverse plating—Conceptual,advantages and applications. Electrochimica Acta, 53 (8). pp. 3313-3322.

Emmanuel, B. (2008) A complex parameter boundary element method for modeling AC impedances of electrochemical systems by analytic continuation— Application to a slit geometry. Engineering Analysis with Boundary Elements, 32 (9). pp. 770-777.

Raju, T. and Chung, S.J. and Moon, I.S. (2008) Novel Process for Simultaneous Removal of NOx and SO2 from Simulated Flue Gas by Using a Sustainable Ag(I)/Ag(II) Redox Mediator. Environ. Sci. Technol., 42 (19). pp. 7464-7469.

Oshtrakh, M.I. and Kalaiselvan, R. and Augustin, C.O. and Semionkin, V.A. (2008) Study of CuFe2O4–SnO2 nanocomposites by Mössbauer spectroscopy with high velocity resolution. Hyperfine Interact, 183 (1-3). pp. 37-44.

Raju, T. and Basha, C.A. (2008) Process Parameters and Kinetics for the Electrochemical Generation of Cerium(IV) Methanesulphonate from Cerium(III) Methanesulphonate. Industrial and Engineering Chemistry Research, 47 (22). pp. 8947-8952. ISSN 0888-5885

Subramanian, K. and Gomathi, K.G. and Asokan, K. (2008) Electrosynthesis of Potassium Permanganate in a Cation Exchange Membrane Cell. Ind. Eng. Chem. Res., 47 (22). pp. 8526-8532.

Vasudevan, S. (2008) Effect of Cations of Alkali and Alkaline-Earth Metal Chlorides for Chlorine Evolution Reaction. Ind. Eng. Chem. Res., 47 (3). pp. 976-979.

Rajasekar, A. and Maruthamuthu, S. and Ting, Y.P. (2008) Electrochemical Behavior of Serratia marcescens ACE2 on Carbon Steel API 5L-X60 in Organic/Aqueous Phase. Ind. Eng. Chem. Res., 47 (18). pp. 6925-6932.

Vasudevan, S. (2008) Studies Relating To Cathodic Reactions In Neutral Chloride Solutions Used In Chlorate Processes. Industrial and Engineering Chemistry Research, 47 (15). pp. 5742-5745. ISSN 0888-5885

Raghu, S. and Basha, C.A. (2008) Dye Destruction and Simultaneous Generation of Sodium Hydroxide Using a Divided Electrochemical Reactor. Ind. Eng. Chem. Res., 47 (15). pp. 5277-5283.

Devadoss, V. and Basha, C.A. and Jayaraman, K. (2008) Indirect Electrochemical Oxidation of p-Methoxy-Toluene to p-Methoxy-Benzaldehyde Using Ceric Methanesulphonate: A Scale-up Study. Industrial and Engineering Chemistry, 47 (14). pp. 4607-4616. ISSN 0019-7866

Saravanathamizhan, R. and Paranthaman, R. and Balasubramanian, N. (2008) Tanks in Series Model for Continuous Stirred Tank Electrochemical Reactor. Industrial and Engineering Chemistry Research, 47 (9). pp. 2976-2984. ISSN 0888-5885

Basha, C.A. and Ramanathan, K. and Rajkumar, R. and Mahalakshmi, M. and Senthilkumar, P. (2008) Management of Chromium Plating Rinsewater Using Electrochemical Ion Exchange. Industrial and Engineering Chemistry Research, 47 (7). pp. 2279-2286. ISSN 0888-5885

Vasudevan, S. and Sozhan, G. and Ravichandran, S. and Jayaraj, J. and Lakshmi, J. and Sheela, S.M. (2008) Studies on the Removal of Phosphate from Drinking Water by Electrocoagulation Process. Industrial and Engineering Chemistry Research, 47 (6). pp. 2018-2023. ISSN 0888-5885

Vasudevan, S. (2008) Studies Relating to Electrolytic Preparation of Potassium Bromate. Industrial and Engineering Chemistry Research, 47 (5). pp. 1743-1746. ISSN 0888-5885

Vedalakshmi, R. and Sundara Raj, A. and Palaniswamy, N. (2008) Identification of various chemical phenomena in concrete using thermal analysis. Indian Journal of Chemical Technology, 15 (4). pp. 388-396.

Vedalakshmi, R. and Rajagopal, K. and Palanisamy, N. (2008) Enhanced corrosion resistance of rebar embedded in fly ash added concrete: Role of "k" factor. Indian Journal of Chcmical Tcchnology, 15 (4). pp. 375-382.

Selvakumar, M. and Bhat, D.K. and Renganathan, N.G. (2008) Molecular interactions of polyvinylpyrrolidone and cellulose acetate butyrate solutions in dimethylformamide. Indian Journal of Chemistry, 47 (7). pp. 1014-1019.

Kumar, S. and Thilakavathi, R. and Bala Subramanian, N. and Basha, C.A. (2008) Studies on the Fluidized Bed Electrode. International Journal of Chemical Reactor Engineering, 6 (A41). pp. 1-24. ISSN 1542-6580

Parthiban, G.T. and Bharanidharan, K. and Dhayanand, D. and Thirumalai, P. and Palaniswamy, N. and Sivan, V. (2008) Influence of Sacrificial Cathodic Protection on the Chloride Profile in Concrete. International Journal of Electrochemical Science, 3 (10). pp. 1162-1168.

Jayaprakash, N. and Kalaiselvi, N. and Periasamy, P. (2008) Synthesis and Characterization of LiMXFe1-XPO4 (M = Cu, Sn; X = 0.02) Cathodes - A study on the Effect of Cation Substitution in LiFePO4 Material. International Journal of Electrochemical Science, 3 (4). pp. 476-488. ISSN 1452-3981

Kumar, K. and Karthikeyan, M.S. and Palaniswamy, N. (2008) Evaluation of Performance of Grout Materials in Protection of Prestressing Steel. International Journal of Electrochemistry, 3 (3). pp. 315-324.

Ananth, M.V. and Giridhar, V.V. and Renuga, K. (2008) Linear sweep voltametry studies on oxygen reduction of some oxides in alkaline electrolytes. International Journal of Hydrogen Energy , 33 (20). pp. 5779-5788. ISSN 0360-3199

Ganesan, M. (2008) Li4Ti2.5Cr2.5O12 as anode material for lithium battery. Ionics, 14 (5). pp. 395-401. ISSN 0947-7047

Elamathi, S. and Nithyakalyani, G. and Sangeetha, D. and Ravichandran, S. (2008) Preparation and evaluation of ionomeric membranes based on sulfonated-poly (styrene_isobutylene_styrene) membranes for proton exchange membrane fuel cells (PEMFC). Ionics, 14 (5). pp. 377-385. ISSN 0947-7047

Ganesh, B. and Kalpana, D. and Renganathan, N.G. (2008) Acrylamide based proton conducting polymer gel electrolyte for electric double layer capacitors. Ionics, 14 (4). pp. 339-343.

Christy, A.Y.M.T. and Nahm, K.S. and Hwang, Y.J. and Suh, E.K. and Anbukulandainathan, M. and Premkumar, T. and Stephan, A.M. (2008) Lithium insertion studies on boron-doped diamond as a possible anode material for lithium batteries. Ionics, 14 (2). pp. 157-161. ISSN 0947-7047

Sahu, A.K. and Selvarani, G. and Pitchumani, S. and Sridhar, P. and Shukla, A.K. and Narayanan, N. and Banerjee, A. and Chandrakumar, N. (2008) PVA-PSSA Membrane with Interpenetrating Networks and its Methanol Crossover Mitigating Effect in DMFCs. Journal of the Electrochemical Society, 155 (7). B686-B695. ISSN 0013-4651

Murali, K.R. and Clara Dhanemozhi, A. and Rita, J. (2008) Brush plated ZnS films and their properties. Journal of Alloys and Compounds, 464 (1-2). pp. 383-386.

Doh, C.H. and Shin, H.M. and Kim, D.H. and Jeong, Y.D. and Moon, S.I. and Jin, B.S. and Kim, H.S. and Kim, K.W. and Oh, D.H. and Veluchamy, A. (2008) A new composite anode, Fe–Cu–Si/C for lithium ion battery. Journal of Alloys and Compounds, 461 (1-2). pp. 321-325. ISSN 0925-8388

Harish, S. and Mathiyarasu, J. and Phani, K.L.N. and Yegnaraman, V. (2008) PEDOT/Palladium composite material: synthesis, characterization and application to simultaneous determination of dopamine and uric acid. J Appl Electrochem., 38 (11). pp. 1583-1588.

Subramanian, B. and Ashok, K. and Jayachandran, M. (2008) Structure, mechanical and corrosion properties of DC reactive magnetron sputtered aluminum nitride (AlN) hard coatings on mild steel substrates. Journal of Applied Electrochemistry, 38 (5). pp. 619-625.

Sripriya, R. and Chandrasekaran, M. and Noel, M. (2008) Electrochemical homolytic and heterolytic coupling of activated olefins in the absence and presence of benzyl bromide in microemulsion. Journal of Applied Electrochemistry, 38 (5). pp. 597-603.

Song, H.W. and Saraswathy, V. and Muralidharan, S. and Thangavel, K. (2008) Tolerance limit of chloride for steel in blended cement mortar using the cyclic polarisation technique. Journal of Applied Electrochemistry, 38 (4). pp. 445-450. ISSN 0021-891X

Vasudevan, D. and Kennady, C.J. (2008) Electroreduction of carbonyl compounds at a Ti/ceramic TiO2 cathode. Journal of Applied Electrochemistry, 38 (3). pp. 403-408.

Selvarani, G. and Sahu, A.K. and Sridhar, P. and Pitchumani, S. and Shukla, A.K. (2008) Effect of diffusion-layer porosity on the performance of polymer electrolyte fuel cells. Journal of Applied Electrochemistry, 38 (3). pp. 357-362. ISSN 0021-891X

Ilayaraja, N. and Manivel, A. and Velayutham, D. and Noel, M. (2008) Effect of alkyl chain length on the electrochemical perfluorination of n-alkane (C6–C10) carboxylic acid chlorides. Journal of Applied Electrochemistry, 38 (2). pp. 175-186.

Hariprakash, B. and Martha, S.K. and Ambalavanan, S. and Gaffoor, S.A. and Shukla, A.K. (2008) Comparative study of lead-acid batteries for photovoltaic standalone lighting systems. Journal of Applied Electrochemistry, 38 (1). pp. 77-82.

Stephen, A. and Rossi, F. and Nasi, L. and Ferrari, C. and Ponpandian, N. and Ananth, M.V. and Ravichandran, V. (2008) Induced ordering in electrodeposited nanocrystalline Ni–Mn alloys. Journal Of Applied Physics, 103 (5). 053511-1. ISSN 0021-8979

Syed, K.A.Z. and Kaleeswari, P. and Thirumalai, J. and Manoharan, SP. and Sundararaj, A. and Jagannathan, R. (2008) Opto-impedance characteristics of europium doped strontium aluminate and strontium chloro-apatite phosphors: A comparison. Journal of Physics D: Applied Physics, 41 (17). ISSN 0022-3727

Manivel, P. and Sathiyanarayanan, S. and Venkatachari, G. (2008) Synthesis of Poly(p-phenylene diamine) and Its Corrosion Inhibition Effect on Iron in 1M HCl. Journal of Applied Polymer Science, 110 (5). pp. 2807-2814. ISSN 0021-8995

Sathiyanarayanan, S. and Azim, S.S. and Venkatachari, G. (2008) Performance Studies of Phosphate-Doped Polyaniline Containing Paint Coating for Corrosion Protection of Aluminium Alloy. Journal of Applied Polymer Science, 107 (4). pp. 2224-2230. ISSN 0021-8995

Moses Ezhil Raj, A. and Selvan, G. and Ravidhas, C. and Jayachandran, M. and Sanjeeviraja, C. (2008) Magnesium indium oxide (MgIn2O4) spinel thin films: Chemical spray pyrolysis(CSP) growth and materials characterizations. Journal of Colloid and Interface Science, 328 (2). pp. 396-401.

Sathishkumar, M. and Vijayaraghavan, K. and Banupriya, A.R. and Stephan, A.M. and Choi, J.G. and Yun, S.E. (2008) Porogen effect on characteristics of banana pith carbon and the sorption of dichlorophenols. Journal of Colloid and Interface Science, 320 (1). pp. 22-29.

Amalajyothi, K. and Berchmans, L.J. and Angappan, S. and Visuvasam, A. (2008) Electrosynthesis of cerium hexaboride by the molten salt technique. Journal of Crystal Growth, 310 (14). pp. 3376-3379.

Emmanuel, B. (2008) Constant phase elements, depressed arcs and analytic continuation: A critique. Journal of Electroanalytical Chemistry, 624 (1-2). pp. 14-20. ISSN 1572-6657

Sahu, A.K. and Selvarani, G. and Pitchumani, S. and Sridhar, P. and Shukla, A.K. and Narayanan, N. and Banerjee, A. and Chandrakumar, N. (2008) PVA-PSSA Membrane with Interpenetrating Networks and its Methanol Crossover Mitigating Effect in DMFCs. Journal of the Electrochemical Society, 155 (7). B686-B695. ISSN 0013-4651

Choudhury, N.A. and Sampath, S. and Shukla, A.K. (2008) Gelatin Hydrogel Electrolytes and Their Application to Electrochemical Supercapacitors. Journal of the Electrochemical Society, 155 (1). A74-A81. ISSN 0013-4651

Sivashanmugam, A. and Prasad, S.R. and Thirunakaran, R. and Gopukumar, S. (2008) Electrochemical Performance of AlÕMnO2 Dry Cells: An Alternative to Lechlanche Dry Cells. Journal of the Electrochemical Society, 155 (10). A725-A728. ISSN 0013-4651

Sulochana, A. and Thirunakaran, R. and Sivashanmugam, A. and Gopukumar, S. and Yamaki, J.I. (2008) Sol-Gel Synthesis of 5 V LiCuxMn2−xO4 as a Cathode Material for Lithium Rechargeable Batteries. Journal of the Electrochemical Society, 155 (3). A206-A210. ISSN 0013-4651

Ilayaraja, N. and Manivel, A. and Velayutham, D. and Noel, M. (2008) The effect of substituents and operating conditions on the electrochemical fluorination of alkyl phenylacetates in Et3N4HF medium. Journal of Fluorine Chemistry, 129 (3). pp. 185-192.

Basha, C.A. and Bhadrinarayana, N.S. and Anantharaman, N. and Meera Sheriffa Begum, K.M. (2008) Heavy metal removal from copper smelting effluent using electrochemical cylindrical flow reactor. Journal of Hazardous Materials, 152 (1). pp. 71-78.

Thirunakaran, R. and Sivashanmugam, A. and Gopukumar, S. and Dunnill, C.W. and Gregory, D.H. (2008) Studies on chromium/aluminium-doped manganese spinel as cathode materials for lithium-ion batteries—A novel chelated sol–gel synthesis. Journal of Material Processing Technology, 208 (1-3). pp. 520-531.

John Berchmans, L. and Sindhu, R. and Angappan, S. and Augustin, C.O. (2008) Effect of antimony substitution on structural and electrical properties of LaFeO3. Journal of Materials Processing Technology, 207 (1-3). pp. 301-306. ISSN 0924-0136

Murali, K.R. and Saravanan, T. and Jayachandran, M. (2008) Synthesis and characterization of copper substituted lithium manganate spinels. Journal of Materials Science: Material Electron, 19 (6). pp. 533-537.

Murali, K.R. (2008) Characteristics of sol–gel dip coated Ceria films. Journal of Materials Science: Materials in Electronics, 19 (4). pp. 369-371. ISSN 0957-4522

Murali, K.R. and Elango, P. and Andavan, P. and Venkatachalam, K. (2008) Preparation of CdSxSe1–x films by brush plating technique and their characteristics. Journal of Materials Science: Materials Electron, 19 (3). pp. 289-293.

Murali, K.R. and Abirami, J. and Balasubramanian, T. (2008) Pulse plated zinc sulphide films and their characteristics. Journal of Materials Science: Materials Electron, 19 (3). pp. 217-222.

Sahu, A.K. and Selvarani, G. and Bhat, S.D. and Pitchumani, S. and Sridhar, P. and Shukla, A.K. and Narayanan, N. and Banerjee, A. and Chandrakumar, N. (2008) Effect of varying poly(styrene sulfonic acid) content in poly(vinyl alcohol)–poly(styrene sulfonic acid) blend membrane and its ramification in hydrogen–oxygen polymer electrolyte fuel cells. Journal of Membrane Science, 319 (1-2). pp. 298-305. ISSN 0376-7388

Hwang, Y.J. and Nahm, K.S. and Premkumar, T. and Manuelstephan, A. (2008) Poly(vinylidene fluoride-hexafluoropropylene)-based membranes for lithium batteries. Journal of Membrane Science, 310 (1-2). pp. 349-355. ISSN 0376-7388

Ezhil Raj, A.M. and Vijayalakshmi, K. and Selvan, G. and Jayachandran, M. and Sanjeeviraja, C. (2008) Influence of metal organic and inorganic precursors on spray pyrolyzed ceramic MgO (200) thin films for epitaxial over layers. Journal of Non-Crystalline Solids, 354 (31). pp. 3773-3779. ISSN 0022-3093

Aravindan, V. and Vickraman, P. and Premkumar, T. (2008) Polyvinylidene fluoride–hexafluoropropylene (PVdF–HFP)-based composite polymer electrolyte containing LiPF3(CF3CF2)3. Journal of Non-Crystalline Solids, 354 (29). pp. 3451-3457. ISSN 0022-3093

Vittal, R. and Kim, K.J. and Gomathi, H. and Yegnaraman, V. (2008) CTAB-Promoted Prussian Blue-Modified Electrode and Its Cation Transport Characteristics for K+, Na+, Li+, and NH4 + Ions. Journal of Physical Chemistry B, 112 (4). pp. 1149-1156. ISSN 1520-6106

Thirunakaran, R. and Sivashanmugam, A. and Gopukumar, S. and Dunnill, C.W. and Gregory, D.H. (2008) Electrochemical behaviour of nano-sized spinel LiMn2O4 and LiAlxMn2xO4(x ¼ Al: 0.00–0.40) synthesized via fumaric acid-assisted sol–gel synthesis for use in lithium rechargeable batteries. Journal of Physics and Chemistry of Solids, 69 (8). pp. 2082-2090. ISSN 0022-3697

Ragavendran, K. and Morchshakov, V. and Veluchamy, A. and Barner, K. (2008) Trap state spectroscopy in CMR manganites and spinel manganates using opto-impedance. Journal of Physics and Chemistry of Solids, 69 (1). pp. 182-186. ISSN 0022-3697

Syed, K.A.Z. and Kaleeswari, P. and Thirumalai, J. and Manoharan, SP. and Sundara Raj, A. and Jagannathan, R. (2008) Opto-impedance characteristics of europium doped strontium aluminate and strontium chloro-apatite phosphors: a comparison. Journal of Physics D: Applied Physics, 41 (17). ISSN 0022-3727

Sivakumar, R. and Sanjeeviraja, C. and Jayachandran, M. and Gopalakrishnan, R. and Sarangi, S.N. and Paramanik, D. and Som, T. (2008) High temperature grown transition metal oxide thin films: tuning physical properties by MeV N+-ion bombardment. Journal of Physics D: Applied Physics, 41 (12). ISSN 0022-3727

Anwar, S. and Lalla, N.P. (2008) Occurrence of a new superlattice phase across the antiferroelectric phase transition in Sr1−xCaxTiO3 (x = 0.30 and 0.40). Journal of Physics: Condensed Matter, 20 (32). ISSN 0953-8984

Malini, R. and Uma, U. and Sheela, T. and Ganesan, M. and Renganathan, N.G. (2008) Conversion reactions: a new pathway to realise energy in lithium-ion battery—review. Ionics, 15 (3). pp. 301-307. ISSN 0947-7047

Lee, K.M. and Suryanarayanan, V. and Ho, K.C. (2008) A photo-physical and electrochemical impedance spectroscopy study on the quasi-solid state dye-sensitized solar cells based on poly(vinylidene fluoride-co-hexafluoropropylene. Journal of Power Sources, 185 (2). pp. 1605-1612. ISSN 0378-7753

Kuo, C.W. and Sivakumar, C. and Wen, T.C. (2008) Nanoparticles of Pt/HxMoO3 electrodeposited in poly (3,4-ethylenedioxythiophene)-poly(styrene sulfonic acid) as the electrocatalyst for methanol oxidation. Journal of Power Sources, 185 (2). pp. 807-814. ISSN 0378-7753

Balasubramanian, A. and Karthikeyan, N. and Giridhar, V.V. (2008) Synthesis and characterization of LaNiO3-based platinum catalyst for methanol oxidation. Journal of Power Sources, 185 (2). pp. 670-675. ISSN 0378-7753

Raju, M. and Ananth, M.V. and Vijayaraghavan, L. (2008) Influence of temperature on the electrochemical characteristics of MmNi3.03Sio.8SCoO.60Mno.31Alo.08 hydrogen storage alloys. Journal of Power Sources, 180 (2). pp. 830-835. ISSN 0378-7753

Doh, C.H. and Park, C.W. and Shin, H.M. and Kim, D.H. and Chung, Y.D. and Moon, S.I. and Jin, B.S. and Kim, H.S. and Veluchamy, A. (2008) A new SiO/C anode composition for lithium-ion battery. Journal of Power Sources, 179 (1). pp. 367-370. ISSN 0378-7753

Selvarani, G. and Prashant, S.K. and Sahu, A.K. and Sridhar, P. and Pitchumani, S. and Shukla, A.K. (2008) A direct borohydride fuel cell employing Prussian Blue as mediated electron-transfer hydrogen peroxide reduction catalyst. Journal of Power Sources, 178 (1). pp. 86-91. ISSN 0378-7753

Shenouda, A.Y. and Murali, K.R. (2008) Electrochemical properties of doped lithium titanate compounds and their performance in lithium rechargeable batteries. Journal of Power Sources, 176 (1). pp. 332-339. ISSN 0378-7753

Doh, C.H. and Kim, D.H. and Kim, H.S. and Shin, H.M. and Jeong, Y.D. and Moon, S.I. and Jin, B.S. and Eom, S.W. and Kim, H.S. and Kim, K.W. and Oh, D.H. and Veluchamy, A. (2008) Thermal and electrochemical behaviour of C/LixCoO2 cell during safety test. Journal of Power Sources, 175 (2). pp. 881-885. ISSN 0378-7753

Suriyanarayanan, N. and Noel, M. (2008) Interaction between organic molecules and electrogenerated nickel fluoride films: the choice of organic reactants for electrochemical perfluorination. Journal of Solid State Electrochemistry, 12 (11). pp. 1453-1460. ISSN 1432-8488

Vasanthi, R. and Kalpana, D. and Renganathan, N.G. (2008) Olivine-type nanoparticle for hybrid supercapacitors. Journal of Solid State Electrochemistry, 12 (7-8). pp. 961-969. ISSN 1432-8488

Saradha, T. and Muzhumathi, S. and Subramanian, A. (2008) Microwave-assisted combustion synthesis of nanocrystalline La2Mo2O9 oxide-ion conductor and its characterization. Journal of Solid State Electrochemistry, 12 (2). pp. 143-148. ISSN 1432-8488

Anbukulandainathan, M. and Kiruthika, K. and Christopher, G. and Firozbabu, K. and Muthukumaran, A. and Noel, M. (2008) Preparation of iron-deposited graphite surface for application as cathode material during electrochemical vat-dyeing process. Materials Chemistry and Physics, 112 (2). pp. 478-484. ISSN 0254-0584

Kalaiselvan, R. and Augustin, C.O. and Sepelak, V. and Berchmans, L.J. and Sanjeeviraja, C. and Gedanken, A. (2008) Synthesis and characterization of CuFe2O4/CeO2 nanocomposites. Materials Chemistry and Physics, 112 (2). pp. 373-380. ISSN 0254-0584

Jeong, S.K. and Shin, J.S. and Nahm, K.S. and Premkumar, T. and Manuelstephan, A. (2008) Electrochemical studies on cathode blends of LiMn2O4 and Li[Li1/15Ni1/5Co2/5Mn1/3O2]. Materials Chemistry and Physics, 111 (2-3). pp. 213-217. ISSN 0254-0584

Sathiya Priya, A.R. and Muralidharan, S. and Velmurugan, S. and Venkatachari, G. (2008) Corrosion inhibitor for the chemical decontamination of primary coolant systems of nuclear power plants. Materials Chemistry and Physics, 110 (2-3). pp. 269-275. ISSN 0254-0584

John Berchmans, L. and Angappan, S. and Visuvasam, A. and Ranjith Kumar, K.B. (2008) Preparation and characterization of LaAI03. Materials Chemistry and Physics, 109 (1). pp. 113-118. ISSN 0254-0584

Senthilkumar, M. and Mathiyarasu, J. and Joseph, J. and Phani, K.L.N. and Yegnaraman, V. (2008) Electrochemical instability of indium tin oxide (ITO) glass in acidic pH range during cathodic polarization. Materials Chemistry and Physics, 108 (2-3). pp. 403-407. ISSN 0254-0584

Kumar, M. and Arulraj, I. and Pattabiraman, R. (2008) Y2Zr2O7 (YZ)-pyrochlore based oxide as an electrolyte material for intermediate temperature solid oxide fuel cells (ITSOFCs)—Influence of Mn addition on YZ. Materials Chemistry and Physics, 108 (1). pp. 102-108. ISSN 0254-0584

Shanthi, C. and Barathan, S. and Jaiswal, R. and Arunachalam, R.M. and Mohan, S. (2008) The effect of pulse parameters in electro deposition of silver alloy. Materials Letters, 62 (30). pp. 4519-4521. ISSN 0167-577X

Murali, K.R. and Vasantha, S. and Rajamma, K. (2008) Properties of pulse plated ZnS films. Materials Letters, 62 (12-13). pp. 1823-1826. ISSN 0167-577X

Subramanian, B. and Jayachandran, M. (2008) Electrochemical corrosion behavior of magnetron sputtered TiN coated steel in simulated bodily fluid and its hemocompatibility. Materials Letters, 62 (10-11). pp. 1727-1730. ISSN 0167-577X

Mathiyarasu, J. and Senthilkumar, S. and Phani, K.L.N. and Yegnaraman, V. (2008) PEDOT-Au nanocomposite film for electrochemical sensing. Materials Letters, 62 (4-5). pp. 571-573. ISSN 0167-577X

Bellakki, M.B. and Shivakumara, C. and Baidya, T. and Prakash, A.S. and Vasanthacharya, N.Y. and Hegde, M.S. (2008) Synthesis, structure and oxygen-storage capacity of Pr1xZrxO2d and Pr1xyPdyZrxO2d. Materials Research Bulletin, 43 (10). pp. 2658-2667. ISSN 0025-5408

Khomane, R.B. and Agrawal, A.C. and Kulkarni, B.D. and Gopukumar, S. and Sivashanmugam, A. (2008) Preparation and electrochemical characterization of lithium cobalt oxide nanoparticles by modified sol–gel method. Materials Research Bulletin, 43 (8-9). pp. 2497-2503. ISSN 0025-5408

Thirunakaran, R. and Sivashanmugam, A. and Gopukumar, S. and Dunnill, C.W. and Gregory, D.H. (2008) Phthalic acid assisted nano-sized spinel LiMn2O4 and LiCrxMn2xO4 (x = 0.00–0.40) via sol–gel synthesis and its electrochemical behaviour for use in Li-ion-batteries. Materials Research Bulletin, 43 (8-9). pp. 2119-2129. ISSN 0025-5408

Vedalakshmi, R. and Renughadevi, R. and Emmanuel, B. and Palaniswamy, N. (2008) Determination of diffusion coefficient of chloride in concrete: An electrochemical impedance spectroscopic approach. Materials and Structures, 41 (7). pp. 1315-1326. ISSN 1359-5997

Devi, K.P. and Kiruthiga, P.V. and Karuthapandian, S. and Archunan, G. and Arun, S. (2008) Olive oil protects rat liver microsomes against benzo(a)pyrene-induced oxidative damages: An in vitro study. Molecular Nutrition and Food Research, 52. S95-S102. ISSN 1613-4125

Jayaprakash, N. and Kalaiselvi, N. and Periasamy, P. (2008) A preliminary investigation into the new class of lithium intercalating LiNiSiO4 cathode material. Nanotechnology, 19 (2). ISSN 0957-4484

Moses Ezhil Raj, A. and Som, T. and Ganesan, V. and Jayachandran, M. and Selvan, G. and Swaminathan, V. and Sanjeeviraja, C. (2008) Tailoring optical and electrical properties of MgO thin films by 1.5 MeV H+ implantation to fluences. Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, 266 (11). pp. 2564-2571. ISSN 0168-583X

Sankar, R. (2008) Efficient green luminescence in Tb3+-activated borates, A6MM0(BO3)6. Optical Materials, 31 (2). pp. 268-275. ISSN 0925-3467

Subramanian, B. and Mohamed Ibrahim, M. and Senthilkumar, V. and Murali, K.R. and Vidhya, V.S. and Sanjeeviraja, C. and Jayachandran, M. (2008) Optoelectronic and electrochemical properties of nickeloxide(NiO)films deposited by DC reactive magnetron sputtering. Physica B: Condensed Matter , 403 (21-22). pp. 4104-4110. ISSN 0921-4526

Moses Ezhil Raj, A. and Lalithambika, K.C. and Vidhya, V.S. and Rajagopal, G. and Thayumanavan, A. and Jayachandran, M. and Sanjeeviraja, C. (2008) Growth mechanism and optoelectronic properties of nanocrystalline In2O3 films prepared by chemical spray pyrolysis of metal-organic precursor. Physica B: Condensed Matter, 403 (4). pp. 544-554. ISSN 0921-4526

Moses Ezhil Raj, A. and Subramanian, B. and Senthilkumar, V. and Jayachandran, M. and Sanjeeviraja, C. (2008) Synthesis and characterization of spray pyrolysed MgIn2O4 spinel thin films for novel applications. Physica E: Low-dimensional Systems and Nanostructures, 40 (3). pp. 467-473. ISSN 1386-9477

Murugan, P. and Bahramy, M.S. and Kawazoe, Y. (2008) Magnetic phase stability and spin-dependent transport in CeNi4M (M=Sc, Ti, V, Cr, Mn, Fe, and Co): First-principles study. Physical Review B, 77 (6). ISSN 1098-0121

Saraswathy, V. and Song, H.W. (2008) Evaluation of Cementitious Repair Mortars for Corrosion Resistance. Portugaliae Electrochimica Acta, 26 (5). pp. 417-432. ISSN 0872-1904

Selvaraj, R. and Selvaraj, M. and Iyer, S.V.K. (2008) Studies on the Evaluation of the Performance of two Types of Polyurethane Coatings on Steel Rebars for the Prevention of Corrosion in Concrete Structures. Portugaliae Electrochimica Acta, 26 (5). pp. 407-416. ISSN 0872-1904

Selvaraj, M. and Palraj, S. and Maruthan, K. and Venkatachari, G. (2008) Physico-chemical properties of ceramic pigments for high-temperature application. Progress in Organic Coatings, 62 (3). pp. 326-330. ISSN 0300-9440

Azim, S.S. and Solaiyan, C. and Venkatachari, G. (2008) Development of coating for temperature sensing. Progress in Organic Coatings, 62 (1). pp. 28-31. ISSN 0300-9440

Ramya, G. and Renugadevi, C. and Rao, C.R.K. and Trivedi, D.C. (2008) Investigations on pyridine-3-sulphonic acid doped polyaniline and polypyrrole: Metal loading through dopant molecules. Reactive & Functional Polymers, 68 (3). pp. 701-709. ISSN 1381-5148

Muralidharan, S. and Saraswathy, V. and Thangavel, K. and Palaniswamy, N. (2008) Electrochemical studies on the performance characteristics of alkaline solid embeddable sensor for concrete environments. Sensors and Actuators B: Chemical, 130 (2). pp. 864-870. ISSN 0925-4005

Angaleeswari, B. and Dura Amirtham, R.M. and Jeevithaa, T. and Vaishnavi, V. and Eevera, T. and Sheela, B. and Yegnaraman, V. (2008) Poly(o-anisidine)–anion composite films as sensing platform for biological molecules. Sensors and Actuators B: Chemical, 129 (2). pp. 558-565. ISSN 0925-4005

Neelavannan, M.G. and Basha, C.A. (2008) Electrochemical-assisted photocatalytic degradation of textile washwater. Separation and Purification Technology, 61 (2). pp. 168-174. ISSN 1383-5866

Tiwari, J.P. and Rao, C.R.K. (2008) Template synthesized high conducting silver chloride nanoplates. Solid State Ionics, 179 (9-10). pp. 299-304. ISSN 0167-2738

Sankar, R. (2008) Efficient blue luminescence in Ce3þ-activated borates, A6MM0(BO3)6. Solid State Sciences, 10 (12). pp. 1864-1874. ISSN 1293-2558

Shibli, S.M.A. and Manu, R. and Beegum, S. (2008) Studies on the influence of metal oxides on the galvanic characteristics of hot-dip zinc coating. Surface and Coatings Technology, 202 (9). pp. 1733-1737. ISSN 0257-8972

Saravanan, G. and Mohan, S. and Gnanamuthu, R.M. and Vijayakumar, J. (2008) Effect of AlCl3, CH3SO3H on thickness, current efficiency and corrosion properties of brush plated Cr(III) formate urea baths. Surface Engineering, 24 (6). pp. 458-463. ISSN 0267-0844

Selvaraj, M. and Palraj, S. and Maruthan, K. and Rajagopal, G. and Venkatachari, G. (2008) Polypyrrole as a protective pigment in organic coatings. Synthetic Metals, 158 (21-24). pp. 888-899. ISSN 0379-6779

Rao, C.R.K. and Vijayan, M. (2008) Ruthenium(II)-mediated synthesis of conducting polyaniline (PAni): A novel route for PAni–RuO2 composite. Synthetic Metals, 158 (12). pp. 516-519. ISSN 0379-6779

Karthik, G. and Kulangiappar, K. and Marken, F. and Anbukulandainathan, M. (2008) Electrochemically promoted Friedel–Crafts acylation of aromatic compounds. Tetrahedron Letters, 49 (16). pp. 2625-2627. ISSN 0040-4039

Moses Ezhil Raj, A. and Senthilkumar, V. and Swaminathan, V. and Wollschlager, J. and Suendorf, M. and Neumann, M. and Jayachandran, M. and Sanjeeviraja, C. (2008) Studies on transparent spinel magnesium indium oxide thin films prepared by chemical spray pyrolysis. Thin Solid Films, 517 (2). pp. 510-516. ISSN 0040-6090

Shanmugasigamani, S. and Pushpavanam, M. (2008) Bright zinc–nickel alloy deposition from alkaline non-cyanide bath. Transactions of the Institute of Metal Finishing, 86 (2). pp. 122-128. ISSN 0020-2967

Ramesh Bapu, G.N.K. and Eagammai, C. and Jayakrishnan, S. (2008) Electrolytic recovery of silver from low concentrated silver cyanide spent plating solutions. Transactions of the Institute of Metal Finishing, 86 (1). pp. 66-72. ISSN 0020-2967

Subramanian, B. and Jayachandran, M. (2008) Materials properties of nanostructured titanium nitride thin films synthesised by DC reactive magnetron sputtering. Transactions of the Institute of Metal Finishing, 86 (1). pp. 62-65. ISSN 0020-2967

Amalajyothi, K. and Berchmans, L.J. (2008) Novel Synthesis of Cerium Hexaboride by Hexamine Route. International Journal of Self-Propagating High-Temperature Synthesis, 17 (4). pp. 218-221. ISSN 1061-3862

Vincent, S. and Nalini, T. (2008) PIC micro controller based remote terminal unit for a supervisory cathodic protection monitoring system. Journal of Instrumentation Society of India, 38 (4). pp. 248-253.

Dhoke, S.K. and Maruthan, K. and Palraj, S. and Selvaraj, M. (2008) Performance of black pigments incorporated in interpenetrating polymer network (IPN). Progress in Organic Coatings, 56 (1). pp. 53-58. ISSN 0021-8995

Sathiyanarayanan, S. and Azim, S.S. and Venkatachari, G. (2008) Corrosion protection coating containing polyaniline glass flake composite for steel. Electrochimica Acta, 53 (05). pp. 2087-2094. ISSN 0013-4686

Bhaskaran, R. and Palaniswamy, N. and Veerakumar, M. and Raghuvaran, G. and Senthilraja, T. and Mohammednazar, A. (2008) Catastrophic corrosion failures and corrosion management. Materials Performance, 47 (04). pp. 62-64. ISSN 0094-1492

Subramania, A. and Saradha, T. and Muzhumathi, S. (2008) Synthesis and characterization of nanocrystalline La2Mo2O9 fast oxide-ion conductor by an in-situ polymerization method. Materials Research Bulletin, 43 (05). pp. 1153-1159. ISSN 0025-5408

Sathiyanarayanan, S. and Jeyaprabha, C. and Venkatachari, G. (2008) Influence of metal cations on the inhibitive effect of polyaniline for iron in 0.5 M H2SO4. Materials Chemistry and Physics, 107 (2-3). pp. 350-355. ISSN 0254-0584

Sathiyanarayanan, S. and Azim, S.S. and Venkatachari, G. (2008) Corrosion protection of magnesium alloy ZM21 by polyaniline-blended coatings. Journal of Coatings Technology and Research, 05 (04). pp. 471-477. ISSN 1547-0091

Ganesan, K. and Rajagopal, K. (2007) Evaluation of bagasse ash as corrosion resisting admixture for carbon steel in concrete. Anti-Corrosion Methods and Materials , 54 (4). pp. 230-236. ISSN 0003-5599

Muthukumar, N. and Maruthamuthu, S. and Mohanan, S. and Palaniswamy, N. (2007) Influence of an oil soluble inhibitor on microbiologically influenced corrosion in a diesel transporting pipeline. Biofouling, 23 (6). 395 -404. ISSN 0892-7014

Prasad, D. and Arun, S. and Murugesan, M. and Padmanaban, S. and Satyanarayanan, R.S. and Sheela, B. and Yegnaraman, V. (2007) Direct electron transfer with yeast cells and construction of a mediator less microbial fuel cell. Biosensors and Bioelectronics, 22. pp. 2604-2610. ISSN 0956-5663

Ha, T.H. and Muralidharan, S. and Bae, J.H. and Ha, Y.C. and Lee, H.G. and Park, K.W. and Kim, D.K. (2007) Accelerated short-term techniques to evaluate the corrosion performance of steel in fly ash blended concrete. Building and Environment, 42. pp. 78-85.

Saraswathy, V. and Song, H.W. (2007) Improving the durability of concrete by using inhibitors. Building and Environment, 42. pp. 464-472.

Suthan kissinger, N.J. and Jayachandran, M. and Perumal, K. and Sanjeeviraja, C. (2007) Structural and optical properties of electron beam evaporated CdSe thin films. Bulletin of Materials Science, 30 (6). pp. 547-551. ISSN 0250-4707

Raghu, S. and Nirmal, R.G. and Mathiyarasu, J. and Sheela, B. and Phani, K.L.N. and Yegnaraman, V. (2007) Platinum–Dendrimer Nanocomposite Films on Gold Surfaces for Electrocatalysis. Catal Lett, 119. pp. 40-49.

Ganesan, K. and Rajagopal, K. and Thangavel, K. (2007) Evaluation of bagasse ash as supplementary cementitious material. Cement & Concrete Composites, 29. pp. 515-524. ISSN 0958-9465

Nakkiran, A. and Thirumalai, J. and Jagannathan, R. (2007) Luminescence blinking in Eu3+ doped yttrium oxysulfide (Y2O2S:Eu3+) quantum-dot ensembles: Photo-assisted relaxation of surface state(s). Chemical Physics Letters, 436. pp. 155-161. ISSN 0009-2614

Senthilkumar, S. and Joseph, J. and Phani, K.L.N. (2007) Novel Method for Deposition of Gold-Prussian Blue Nanocomposite Films Induced by Electrochemically Formed Gold Nanoparticles: Characterization and Application to Electrocatalysis. Chemistry of Materials, 19. pp. 4722-4730. ISSN 0897-4756

Remona, A.M. and Phani, K.L.N. (2007) Comment on “Synthesis of Ordered Intermetallic PtBi2 Nanoparticles for Methanol-Tolerant Catalyst in Oxygen Electroreduction”. Chemistry of Materials, 19. ISSN 0897-4756

Sripriya, R. and Chandrasekaran, M. and Subramanian, K. and Asokan, K. and Noel, M. (2007) Electrochemical destruction of p-chlorophenol and p-nitrophenol – Influence of surfactants and anode materials. Chemosphere, 69. pp. 254-261.

Kiruthiga, P.V. and Beemashafreen, R. and Karuthapandian, S. and Arun, S. and Govindu, S. and Pandima Devi, K. (2007) Protective effect of silymarin on erythrocyte haemolysate against benzo(a)pyrene and exogenous reactive oxygen species (H2O2) induced oxidative stress. Chemosphere, 68. pp. 1511-1518.

Saravanathamizhan, R. and Mohan, N. and Balasubramanian, N. and Ramamurthi, V. and Basha, C.A. (2007) Evaluation of Electro-Oxidation of Textile Effluent Using Response Surface Methods. Clean, 35 (4). 355 -361.

Muthukumar, N. and Maruthamuthu, S. and Palaniswamy, N. (2007) Role of cationic and nonionic surfactants on biocidal efficiency in diesel-water interface. Colloids and Surfaces B: Biointerfaces, 57. pp. 152-160.

Anbukulandainathan, M. and Patil, K. and Muthukumaran, A. and Chavan, R.B. (2007) Review of the process development aspects of electrochemical dyeing: its impact and commercial applications. Process development aspects of electrochemical dyeing, 123. pp. 143-151.

Arun, S. and Subramanian, P. (2007) Cytochrome P450-dependent monooxygenase system mediated hydrocarbon metabolism and antioxidant enzyme responses in prawn, Macrobrachium malcolmsonii. Comparative Biochemistry and Physiology.

Saraswathy, V. and Song, H.W. (2007) Corrosion performance of rice husk ash blended concrete. Construction and Building Materials, 21. pp. 1779-1784.

Subramanian, B. and Umamaheswari, G. and Jayachandran, M. (2007) Properties and corrosion behaviour of reactive magnetron sputtered TiAlN coatings on AISI 316L SS in simulated bodily fluid. Corrosion Engineering, Science and Technology, 42 (4).

Rajasekar, A. and Ganesh Babu, T. and Karuthapandian, S. and Maruthamuthu, S. and Palaniswamy, N. and Rajendran, A. (2007) Biodegradation and corrosion behavior of manganese oxidizer Bacillus cereus ACE4 in diesel transporting pipeline. Corrosion Science, 49. pp. 2694-2710. ISSN 0010-938X

Nehru, L.C. and Raj, A.M.E. and Jayachandran, M. and Sanjeeviraja, C. (2007) Spray pyrolysis deposition and characterization of highly (100) oriented magnesium oxide thin films. Crystal Research and Technology, 42 (9). 867 -875. ISSN 0232-1300

Srinivasan, R. and Jayachandran, M. and Ramachandran, K. (2007) Photoacoustic studies on optical and thermal properties of p-type and n-type nanostructured porous silicon for (100) and (111) orientations. Crystal Research and Technology, 42 (3). 266 -274. ISSN 0232-1300

Subramanian, B. and Mohan, S. and Sobha , J. and Jayachandran, M. (2007) Structural and electrochemical characterization of Ni nanostructure films on steels with brush plating and sputter deposition. Current Applied Physics, 7. pp. 305-313.

Sivakumar, R. and Gopalakrishnan, R. and Jayachandran, M. and Sanjeeviraja, C. (2007) Characterization on electron beam evaporated a-MoO3 thin films by the influence of substrate temperature. Current Applied Physics, 7. pp. 51-59. ISSN 1567-1739

Sivakumar, R. and Gopinath, C.S. and Jayachandran, M. and Sanjeeviraja, C. (2007) An electrochromic device (ECD) cell characterization on electron beam evaporated MoO3 films by intercalating/deintercalating the H+ ions. Current Applied Physics, 7. pp. 76-86.

Rajasekar, A. and Ponmariappan, S. and Maruthamuthu, S. and Palaniswamy, N. (2007) Bacterial Degradation and Corrosion of Naphtha in Transporting Pipeline. Current Microbiology, 55. pp. 374-381.

Muralidharan, S. and Kim, D.K. and Ha, T.H. and Bae, J.H. and Ha, Y.C. and Lee, H.G. and Scantlebury, J.D. (2007) Influence of alternating, direct and superimposed alternating and direct current on the corrosion of mild steel in marine environments. Desalination, 216. pp. 103-115.

Balasubramanian, N. and Srinivasakannan, C. and Basha, C.A. (2007) Drying Kinetics in the Riser of Circulating Fluidized Bed with Internals. Drying Technology, 25. pp. 1595-1599. ISSN 0737-3937

Anbukulandainathan, M. and Muthukumaran, A. and Patil, K. and Chavan, R.B. (2007) Potentiostatic studies on indirect electrochemical reduction of vat dyes. Dyes and Pigments, 73. pp. 47-54.

Ganesan, M. (2007) A new promising high temperature lithium battery solid electrolyte. Electrochemistry Communications, 9. pp. 1980-1984.

Saez, V. and Garcia, J.G. and Anbukulandainathan, M. and Marken, F. (2007) Electro-deposition and stripping of catalytically active iron metal nanoparticles at boron-doped diamond electrodes. Electrochemistry Communications, 9. pp. 1127-1133. ISSN 1388-2481

Jayaprakash, N. and Kalaiselvi, N. (2007) On the electrochemical behavior of LiMXFe1XPO4 [M = Cu, Sn; X = 0.02] anodes – An approach to enhance the anode performance of LiFePO4 material. Electrochemistry Communications, 9. pp. 620-628.

Thirumalai, P. and Ravi, R. and Kalaiselvi, N. (2007) Exploration of artificial neural network [ANN] to predict the electrochemical characteristics of lithium-ion cells. Electrochimica Acta, 53. pp. 1877-1882. ISSN 0013-4686

Ghanem, M.A. and Compton, R.G. and Coles, B.A. and Psillakis, E. and Anbukulandainathan, M. and Marken, F. (2007) Microwave activation of electrochemical processes: High temperature phenol and triclosan electro-oxidation at carbon and diamond electrodes. Electrochimica Acta, 53. pp. 1092-1099. ISSN 0013-4686

Manivel, A. and Ilayaraja, N. and Velayutham, D. and Noel, M. (2007) Medium effects on the electro-deposition of MnO2 on glassy carbon electrode: A comparative study in alkane, perfluoro alkane carboxylic acids and methanesulphonic acid. Electrochimica Acta, 52. pp. 7841-7848. ISSN 0013-4686

Muthukumar, N. and Ilangovan, A. and Maruthamuthu, S. and Palaniswamy, N. (2007) Surface analysis of inhibitor films formed by 1-aminoanthraquinones on API 5L-X60 steel in diesel–water mixtures. Electrochimica Acta, 52. pp. 7183-7192. ISSN 0013-4686

Selvarani, G. and Sahu, A.K. and Choudhury, N.A. and Sridhar, P. and Pitchumani, S. and Shukla, A.K. (2007) A phenyl-sulfonic acid anchored carbon-supported platinum catalyst for polymer electrolyte fuel cell electrodes. Electrochimica Acta, 52. pp. 4871-4877. ISSN 0013-4686

Sivakumar, C. (2007) Finely dispersed Pt nanoparticles in conducting poly(o-anisidine)nanofibrillar matrix as electrocatalytic material. Electrochimica Acta, 52. pp. 4182-4190. ISSN 0013-4686

Jayaprakash, N. and Sathiyanarayanan, K. and Kalaiselvi, N. (2007) A novel approach to explore Zn based anodes for lithium-ion battery applications. Electrochimica Acta, 52. pp. 2453-2460. ISSN 0013-4686

Sathiyanarayanan, S. and Azim, S.S. and Venkatachari, G. (2007) A new corrosion protection coating with polyaniline–TiO2 composite for steel. Electrochimica Acta, 52. pp. 2068-2074. ISSN 0013-4686

Pattanaik, S. and Huggins, F.E. and Huffman, G.P. and Linak, W.P. and Miller, C.A. (2007) XAFS Studies of Nickel and Sulfur Speciation in Residual Oil Fly-Ash Particulate Matters (ROFA PM). Environmental Science & Technology, 41 (4). pp. 1104-1110. ISSN 0013-936X

Raman, R.K. and Shukla, A.K. (2007) A Direct Borohydride/Hydrogen Peroxide Fuel Cell with Reduced Alkali Crossover. Fuel Cells, 7 (3). pp. 225-231. ISSN 1615-6846

Hairunnisha, S. and Sendil, G.K. and Prabhakarrethinaraj, J. and Srinivasan, G.N. and Adaikkalam, P. and Kulandaisamy, S. (2007) Studies on the preparation of pure ammonium para tungstate from tungsten alloy scrap. Hydrometallurgy, 85. pp. 65-71.

Sivakumar, V. and Kumar, S. and Ross, C.A. and Horn, Y.S. (2007) Magnetic and Structural Investigation of Electrochemically Lithiated Magnetite Nanoparticles. IEEE Transactions on magnetics, 43 (6).

Muralidharan, V.S. (2007) Electro catalytic amorphous nickel alloy. Indian Journal of Chemical Technology, 14. pp. 161-165.

Samsonnesaraj, A. and AmIraj, I. and Pattabiraman, R. (2007) Synthesis and characterization of LaCo03 based cathode and its chemical compatibility with Ce02 based electrolytes for intermediate temperature solid oxide fuel cell (ITSOFC). Indian Journal of Chemical Technology, 14. pp. 154-160. ISSN 0971-457X

Pathak, S.S. and Yegnaraman, V. and Mathiyrasu, J. and Maji, M. and Khanna, A.S. (2007) Corrosion studies of organicdithiol/monothiol derived self assembled monolayer on copper substrate towards corrosion protection in 0.5 M NaCl. Indian Journal of Chemical Technology, 14. pp. 5-15. ISSN 0971-457X

Palraj, S. and Venkatachari, G. (2007) Corrosion behaviour of copper in mandapam seawater. Indian Journal of Chemical Tcchnology, 14. pp. 29-33. ISSN National Institute of Science Communication and Information Resources

Vishnudevan, M. and Thangavel, K. (2007) A comparative study of inorganic versus organic corrosion inhibitors for mitigation of steel in chloride contaminated alkaline solution. Indian Joumal of Che:ll1ie:JI Te:e:hno!ogy, 14. pp. 22-28.

Radhajeyalakshmi, S. and Senthilkumar, S. and Mathiyarasu, J. and Phani, K.L.N. and Yegnaraman, V. (2007) Simultaneous determination of ascorbic acid, dopamine and uric acid using PEDOT polymer modified electrodes. Indian Journal of Chemistry, 46. pp. 957-961.

Ganesan, K. and Rajagopal, K. and Thangavel, K. (2007) Chloride resisting concrete containing rice husk ash and bagasse ash. Indian Journal of Materials & Sciences, 14. pp. 257-265.

Mohan , S. and Subramanian, P. and Vasudevan, S. (2007) Studies on the Electrochemical Preparation of Sb2O3. Industrial and Engineering Chemistry Research, 46. pp. 7870-7874. ISSN 0888-5885

Bhadrinarayana, N.S. and Basha, C.A. and Anantharaman, N. (2007) Electrochemical Oxidation of Cyanide and Simultaneous Cathodic Removal of Cadmium Present in the Plating Rinse Water. Industrial and Engineering Chemistry Research, 46. pp. 6417-6424. ISSN 0888-5885

Vasudevan, S. and Mohan , S. (2007) Studies on the Electrolytic Preparation of Ba(ClO4)2. Industrial and Engineering Chemistry Research, 46. pp. 6211-6216. ISSN 0888-5885

Vasudevan, S. and Sozhan, G. and Mohan-, S. and Balaji, R. and Malathy, P. and Pushpavanam, S. (2007) Electrochemical Regeneration of Chromium Containing Solution from Metal Finishing Industry. Industrial and Engineering Chemistry Research, 46 (9). pp. 2898-2901. ISSN 0888-5885

Song, H.W. and Saraswathy, V. (2007) Corrosion Monitoring of Reinforced Concrete Structures - A Review. International Journal of Electrochemical Science, 2. pp. 1-28. ISSN 1452-3981

Kalaiselvi, N. (2007) Synthesis and Electrochemical Characterization of Novel Category Si3-xMxN4 (M= Co, Ni, Fe) Anodes for Rechargeable Lithium Batteries. International Journal of Electrochemical Science, 2. 478 -487. ISSN 1452-3981

Periasamy, P. and Kalaiselvi, N. and Kim, H.S. (2007) High Voltage and High Capacity Characteristics of LiNi1/3Co1/3Mn1/3O2 Cathode for Lithium Battery Applications. International Journal of Electrochemical Science, 2. 689 -699. ISSN 1452-3981

Tharamani, C.N. and Murulidharan, V.S. and Mayanna, S.M. (2007) Deposition and Dissolution of Cr-P Alloy: A Cyclic Voltammetric Approach. International Journal of Electrochemical Science, 2. 734 -746. ISSN 1452-3981

Sekar, A.S.S. and Saraswathy, V. and Parthiban, G.T. (2007) Cathodic Protection of Steel in Concrete Using Conductive Polymer Overlays. International Journal of Electrochemical Science, 2. 872 -882. ISSN 1452-3981

Jayaprakash, N. and Kalaiselvi, N. and Doh, C.H. (2007) A new class of tailor-made Fe0.92Mn0.08Si2 lithium battery anodes: Effect of composite and carbon coated Fe0.92Mn0.08Si2 anodes. Intermetallics, 15. pp. 442-450. ISSN 0966-9795

Mohanan, S. and Maruthamuthu, S. and Muthukumar, N. and Rajesekar, A. and Palaniswamy, N. (2007) Biodegradation of palmarosa oil (green oil) by Serratia marcescens. International Journal of Environmental Science & Technology, 4 (2). pp. 279-283.

Ananth, M.V. and Manimaran, K. and Arulraj, I. and Sureka, N. (2007) Influence of air electrode electrocatalysts on performance of air-MH cells. International Journal of Hydrogen Energy, 32. 4267 -4271.

Subramanian, A. and Sathiyapriya, A.R. and Muralidharan, V.S. (2007) Electrocatalytic cobalt–molybdenum alloy deposits. International Journal of Hydrogen Energy, 32. 2843 -2847.

Raju, M. and Manimaran, K. and Ananth, M.V. and Renganathan, N.G. (2007) An EIS study on the capacity fades in MmNi3.6Al0.4Mn0.3Co0.7 metal-hydride electrodes. International Journal of Hydrogen Energy , 32. 1721 -1727. ISSN 0360-3199

Panjali, N. and Ramakrishnan, K.R. (2007) Linear Polarisation Resistance meter for concrete corrosion studies. Journal of Instrumentation society of India , 37 (1). pp. 1-6.

Sureshbapu, R.H. and Panjali, N. and Lucy, P. and Nayak, N.U. (2007) Development of a multi-channel corrosion surveyor for non destructive testing of rcc structures. Journal of the Instrument Society of India, 37 (1). pp. 7-12.

Subramanian, B. and Jayachandran, M. (2007) Characterization of reactive magnetron sputtered nanocrystalline titanium nitride (TiN) thin films with brush plated Ni interlayer. Journal of Applied Electrochemistry, 37. pp. 1069-1075. ISSN 0021-891X

Sahu, A.K. and Selvarani, G. and Pitchumani, S. and Sridhar, P. and Shukla, A.K. (2007) Ameliorating effect of silica addition in the anode-catalyst layer of the membrane electrode assemblies for polymer electrolyte fuel cells. Journal of Applied Electrochemistry, 37. pp. 913-919. ISSN 0021-891X

Jayaprakash, N. and Kalaiselvi, N. and Doh, C.H. (2007) Synthesis and electrochemical evaluation of carbon coated Cu6Sn5 alloy-graphite composite lithium battery anodes. Journal of Applied Electrochemistry, 37. pp. 567-573. ISSN 0021-891X

Subramanian, B. and Mohan, S. and Sobha , J. (2007) Selective area deposition of Tin–Nickel alloy coating – an alternative for decorative chromium plating. Journal of Applied Electrochemistry, 37. pp. 219-224.

Vijayabhara, T. and Muzhumathi, S. and Noel, M. (2007) The use of hydrated nickel–cobalt mixed oxide electrodes for oxidation of aliphatic and aromatic alcohols. Journal of Applied Electrochemistry, 37. pp. 297-301. ISSN 0021-891X

Subramanian, K. and Asokan, K. and Jeevarathinam, D. and Chandrasekaran, M. (2007) Electrochemical membrane reactor for the reduction of carbon dioxide to formate. Journal of Applied Electrochemistry, 37. pp. 255-260. ISSN 0021-891X

Sivakumar, R. and Sanjeeviraja, C. and Jayachandran, M. and Gopalakrishnan, R. and Sarangi, S.N. and Paramanik, D. and Som, T. (2007) MeV N+-ion irradiation effects on -MoO3 thin films. Journal Of Applied Physics, 101. ISSN 0021-8979

Manivel, P. and Sathiyanarayanan, S. and Venkatachari, G. (2007) Influence of H1 and Cl2 Ions on Inhibitive Performance of Poly(aniline) for Iron Corrosion in Acid. Journal of Applied Polymer Science, 106. pp. 3988-3993.

Sathiyanarayanan, S. and Muthukrishnan, S. and Venkatachari, G. (2007) Synthesis and Corrosion Protection Performance of Polydiphenylamine. Journal of Applied Polymer Science, 105. pp. 1707-1711. ISSN 0021-8995

Sripriya, R. and Muthuraja, K. and Santhosh, G. and Chandrasekaran, M. and Noel, M. (2007) The effect of structure of oil phase, surfactant and co-surfactant on the physicochemical and electrochemical properties of bicontinuous microemulsion. Journal of Colloid and Interface Science, 314. pp. 712-717.

Rameshbabu, B. and Parande, A.K. and Raghu, S. and Premkumar, T. (2007) Textile technology. The Journal of Cotton Science, 11. pp. 141-153.

Anbukulandainathan, M. and Hall, C. and Wolverson, D. and Foord, J.S. and MacDonald, S.M. and Marken, F. (2007) Boron-doped diamond electrodes in organic media: Electrochemical activation and selectivity effects. Journal of Electroanalytical Chemistry, 606. pp. 150-158. ISSN 1572-6657

Emmanuel, B. (2007) Computation of ac responses of arbitrary electrode geometries from the corresponding secondary current distributions: A method based on analytic continuation. Journal of Electroanalytical Chemistry, 605. pp. 89-97. ISSN 1572-6657

Ganesan, M. and Dhananjeyan, M.V.T. and Sarangapani, K.B. and Renganathan, N.G. (2007) Solid state rapid quenching method to synthesize micron size Li4Ti5O12. Journal of Electroceramics, 18. pp. 329-337.

Raghu, S. and Basha, C.A. (2007) Chemical or electrochemical techniques, followed by ion exchange, for recycle of textile dye wastewater. Journal of Hazardous Materials, 149. pp. 324-330. ISSN 0304-3894

Neelavannan, M.G. and Revathi, M. and Basha, C.A. (2007) Photocatalytic and electrochemical combined treatment of textile wash water. Journal of Hazardous Materials, 149. pp. 371-378.

Mohan, N. and Balasubramanian, N. and Basha, C.A. (2007) Electrochemical oxidation of textile wastewater and its reuse. Journal of Hazardous Materials, 147. pp. 644-657. ISSN 0304-3894

Raghu, S. and Basha, C.A. (2007) Electrochemical treatment of Procion Black 5B using cylindrical flow reactor—A pilot plant study. Journal of Hazardous Materials, 139. pp. 381-390.

Rajasekar, A. and Babu, T.G. and Pandian, S.T.K. and Maruthamuthu, S. and Palaniswamy, N. and Rajendran, A. (2007) Role of Serratia marcescens ACE2 on diesel degradation and its influence on corrosion. Journal of Indian Microbiol Biotechnology, 34. pp. 589-598.

Thirumalai, J. and Jagannathan, R. and Trivedi, D.C. (2007) Y2O2S:Eu3+ nanocrystals, a strong quantum-confined luminescent system. Journal of Luminescence, 126. pp. 353-358.

Murali, K.R. (2007) Properties of GaAs films deposited by pulse periodic technique. Journal of Materials Science: Materials in Electronics, 42. pp. 1321-1324. ISSN 0957-4522

Murali, K.R. and Kumaresan, S. and Josephprince, J. (2007) Properties of brush plated CdS films. Journal of Materials Science: Materials in Electronics, 18. pp. 487-493. ISSN 0957-4522

Aravindan, V. and Vickraman, P. and Premkumar, T. (2007) ZrO2 nanofiller incorporated PVC/PVdF blend-based composite polymer electrolytes (CPE) complexed with LiBOB. Journal of Membrane Science, 305. pp. 146-151.

Nirmal, R.G. and Kavitha, A.L. and Sheela, B. and Yegnaraman, V. (2007) Electrochemical Investigations of 3-(3-Thienyl) Acrylic Acid Protected Nanoclusters and Planar Gold Surfaces. Journal of Nanoscience and Nanotechnology, 7 (7). pp. 1-9.

Mathiyarasu, J. and Senthilkumar, S. and Phani, K.L.N. and Yegnaraman, V. (2007) PEDOT-Au Nanocomposite Films for Electrochemical Sensing of Dopamine andUric Acid. Journal of Nanoscience and Nanotechnology, 7 (7). pp. 1-5.

Kalaiselvi, N. and Doh, C.H. and Srikeerthi, P. (2007) Synthesis and Characterization of Newly Identified Si3-xMxN4 (M= Co, Fe) Anodes for Lithium Batteries. Journal of New Materials for Electrochemical Systems, 10. pp. 209-212. ISSN 1480-2422

Kalaiselvi, N. and Doh, C.H. and Moon, I.S. (2007) An Insight in to the Synthesis and Anode Performance Behavior of LiNiVO4 Compounds. Journal of New Materials for Electrochemical Systems, 10. pp. 153-159. ISSN 1480-2422

Krishnan, V. and Kalaiselvan, R. and Augustin, C.O. and Gedanken, A. and Bertagnolli, H. (2007) EXAFS and XANES Investigations of CuFe2O4 Nanoparticles and CuFe2O4-MO2 (M ) Sn,Ce) Nanocomposites. Journal of Physical Chemistry B, 111. pp. 16724-16733. ISSN 1520-6106

Subramanian, V. and Luo, C. and Stephan, A.M. and Nahm, K.S. and Thomas, S. and Wei, B. (2007) Supercapacitors from Activated Carbon Derived from Banana Fibers. Journal of Physical Chemistry B, 111 (20). pp. 7527-7531. ISSN 1520-6106

Pol, S.V. and pol, G.V. and Gedanken, A. and Spijksma, G.I. and Grinblat, J. and Kalaiselvan, R. and Kessler, V.G. and Seisenbaeva, G.A. and Gohil, S. (2007) Synthesis of Nanocrystalline Zirconium Titanate and its Dielectric Properties. Journal of Physical Chemistry B, 111 (6). pp. 2484-2489. ISSN 1520-6106

Murali, K.R. (2007) Properties of sol–gel dip-coated zinc oxide thin films. Journal of Physics and Chemistry of Solids, 68. pp. 2293-2296.

Savarimuthu, E. and Lalithambika, K.C. and Mosesezhilraj, A. and Nehru, L.C. and Ramamurthy, A. and Thayumanavan, S. and Sanjeeviraja, C. and Jayachandran, M. (2007) Synthesis and materials properties of transparent conducting In2O3 films prepared by sol–gel-spin coating technique. Journal of Physics and Chemistry of Solids, 68. pp. 1380-1389.

Vadivel, M. A. and Reddy, M.V. and Campet, G. and Vijayamohanan, K.Pillai (2007) Cyclic voltammetry, electrochemical impedance and ex situ X-ray diffraction studies of electrochemical insertion and deinsertion of lithium ion into nanostructured organic–inorganic poly(3,4-ethylenedioxythiophene) based hybrids. Journal of Electroanalytical Chemistry (603). pp. 287-296. ISSN 1572-6657

Subramanian, A. and Saradha, T. and Muzhumathi, S. (2007) Synthesis, sinterability and ionic conductivity of nanocrystalline Pr-doped La2Mo2O9 fast oxide-ion conductors. Journal of Power Sources, 167. pp. 319-324.

Ananth, M.V. and Raju, M. and Manimaran, K. and Balachandran, G. and Nair, L.M. (2007) Influence of rare earth content on Mm-based AB5 metal hydride alloys for Ni-MH batteries—An X-ray fluorescence study. Journal of Power Sources, 167. pp. 228-233. ISSN 0378-7753

Subramanian, A. and Saradha, T. and Muzhumathi, S. (2007) Synthesis of nano-crystalline (Ba0.5Sr0.5)Co0.8Fe0.2O3−δ cathode material by a novel sol–gel thermolysis process for IT-SOFCs. Journal of Power Sources, 165. pp. 728-732.

Shivakumara, C. and Bellakki, M.B. and Prakash, A.S. and Vasanthacharya, N.Y. (2007) Rapid Synthesis of Ferromagnetic La1�xNaxMnO3 (0.00rxr0.25) by the Solution Combustion Method. Journal of American Ceramics Society, 90 (12). pp. 3852-3858.

Mathiyarasu, J. and Phani, K.L.N. (2007) Carbon-Supported Palladium-Cobalt-Noble Metal (Au, Ag, Pt) Nanocatalysts as Methanol Tolerant Oxygen-Reduction Cathode Materials in DMFCs. Journal of the Electrochemical Society, 154 (11). B1100-B1105. ISSN 0013-4651

Sahu, A.K. and Selvarani, G. and Pitchumani, S. and Sridhar, P. and Shukla, A.K. (2007) A Sol-Gel Modified Alternative Nafion-Silica Composite Membrane for Polymer Electrolyte Fuel Cells. Journal of the Electrochemical Society, 154 (2). B123-B132. ISSN 0013-4651

Samsonnesaraj, A. and Kumar, M. and Arulraj, I. and Radhakrishna, I. and Pattabiraman, R. (2007) Investigations on Chemical Interactions between Alternate Cathodes and Lanthanum Gallate Electrolyte for Intermediate Temperature Solid Oxide Fuel Cell (ITSOFC). Journal of Iranian Chemical Society, 4 (1). pp. 89-106.

Basha, C.A. (2007) Role of short range interactions in the charge of maximum adsorption. Journal of Theoretical and Computational Chemistry, 6 (4). pp. 715-729.

Rajendran, L. and Rahamathunissa, G. and Basha, C.A. (2007) Theories of diffusion at a microring electrodes: A review. Journal of Theoretical and Computational Chemistry, 6 (4). pp. 699-713.

Rahamathunissa, G. and Basha, C.A. and Rajendran, L. (2007) The theory of reaction-diffusion processes at cylindrical ultramicroelectrodes. Journal of Theoretical and Computational Chemistry, 6 (2). pp. 301-307.

Senthilkumar, S. and Sivakumar, C. and Mathiyarasu, J. and Phani, K.L.N. (2007) Stabilized Gold Nanoparticles by Reduction Using 3,4-Ethylenedioxythiophene-polystyrenesulfonate in Aqueous Solutions: Nanocomposite Formation, Stability, and Application in Catalysis. Langmuir, 23. pp. 3401-3408.

Murali, K.R. and Kumaresan, S. and Josephprince, J. (2007) Brush electrodeposited CdS films on low temperature substrates. Materials Letters, 61. pp. 2613-2615. ISSN 0167-577X

Prakash, A.S. and Shivakumara, C. and Hegde, M.S. (2007) Single step preparation of CeO2/CeAlO3/-Al2O3 by solution combustion method: Phase evolution, thermal stability and surface modification. Materials Science and Engineering, 139. pp. 55-61.

Murali, K.R. and Jayasuthaa, B. (2007) Properties of CdTe films brush plated on high temperature substrates. Materials Science in Semiconductor Processing, 10. pp. 36-40.

Murali, K.R. and Kumaresan, S. and Josephprince, J. (2007) Characteristics of CdS films brush electrodeposited on low-temperature substrates. Materials Science in Semiconductor Processing, 10. pp. 56-60.

Muralidharan, S. and Ha, T.H. and Bae, J.H. and Ha, Y.C. and Lee, H.G. and Kim, D.K. (2007) A promising potential embeddable sensor for corrosion monitoring application in concrete structures. Measurement, 40. pp. 600-606.

Rajasekar, A. and Maruthamuthu, S. and Palaniswamy, N. and Rajendran, A. (2007) Biodegradation of corrosion inhibitors and their influence on petroleum product pipeline. Microbiological Research, 162. pp. 355-368.

Vinodselvaganesh, S. and Mathiyarasu, J. and Phani, K.L.N. and Yegnaraman, V. (2007) Chemical Synthesis of PEDOT–Au Nanocomposite. Nanoscale Research Letters, 2. pp. 546-549.

Sivakumar, R. and Gopalakrishnan, R. and Jayachandran, M. and Sanjeeviraja, C. (2007) Preparation and characterization of electron beam evaporated WO3 thin films. Optical Materials, 29. pp. 679-687.

Sathiyanarayanan, S. and Azim, S.S. and Venkatachari, G. (2007) Corrosion protection of magnesium ZM 21 alloy with polyaniline–TiO2 composite containing coatings. Progress in Organic Coatings, 59. pp. 291-296.

Saravanan, K. and Sathiyanarayanan, S. and Muralidharan, S. and Azim, S.S. and Venkatachari, G. (2007) Performance evaluation of polyaniline pigmented epoxy coating for corrosion protection of steel in concrete environment. Progress in Organic Coatings, 59. pp. 160-167.

Dhoke, S.K. and Palraj, S. and Maruthan, K. and Selvaraj, M. (2007) Preparation and characterization of heat-resistant interpenetrating polymer network (IPN). Progress in Organic Coatings, 51. pp. 21-27.

Suresh, T. and Joseph, J. and Son, K.M. and Vittal, R. and Lee, J. and Kim, K.J. (2007) Effects of pH of a hybrid gel incorporated with 3-aminopropyltrimethoxysilane on the performance of a quasi-solid state dye-sensitized solar cell. Solar Energy Materials & Solar Cells, 91. pp. 1313-1318.

Zahid, M. and Arulraj, I. and Tietz, F. and Stover, D. (2007) Chemical and physical properties of complex perovskites in the La0.8Sr0.2MnO3deLa0.8Sr0.2CuO2.4þdeLa0.8Sr0.2FeO3d system. Solid State Sciences, 9. pp. 706-712.

Park, Y.W. and Rameshbapu, G.N.K. and Lee, K.Y. (2007) Studies of tin coated brass contacts in fretting conditions under different normal loads and frequencies. Surface & Coatings Technology, 201. pp. 7939-7951.

Malathy, P. and Manikandan, H. and Ramanathan, K. (2007) Preparation and characterization of nickel–cobalt-diamond electro-composites by sediment co-deposition. Surface & Coatings Technology, 201. pp. 6372-6379. ISSN 0257-8972

Muthukumar, N. and Maruthamuthu, S. and Ilangovan, A. and Palaniswamy, N. (2007) Impact of micelles on the biocidal efficiency in a diesel–water interface. Surface and interface analysis, 39. pp. 533-541.

Raja Kumar, P. and Kalpana, D. and Renganathan, N.G. and Pitchumani, S. (2007) Electrocopolymerization of poly(o-toludine-co-metanilic acid) on mild steel surfaces and their physico-electrochemical characterizations. Synthetic Metals, 157. pp. 899-904.

Sathiyanarayanan, S. and Azim, S.S. and Venkatachari, G. (2007) Preparation of polyaniline–Fe2O3 composite and its anticorrosion performance. Synthetic Metals, 157. pp. 751-757.

Rao, C.R.K. and Trivedi, D.C. (2007) Tailoring the gold–polypyrrole nanostructures at water–toluene interphase. Synthetic Metals, 157. pp. 432-436.

Sathiyanarayanan, S. and Azim, S.S. and Venkatachari, G. (2007) Preparation of polyaniline–TiO2 composite and its comparative corrosion protection performance with polyaniline. Synthetic Metals, 157. pp. 205-213.

Raju, T. and Manivasagan, S. and Revathy, B. and Kulangiappar, K. and Muthukumaran, A. (2007) A mild and efficient method for the oxidation of benzylic alcohols by two-phase electrolysis. Tetrahedron Letters, 48. pp. 3681-3684. ISSN 0040-4039

Vairamuthu, R. and Subramaniam, M. (2007) Effect of a-picoline and quinoline on dc and pulse plating of nickel directly on aluminium. Institute of Metal Finishing, 85 (3).

Ravindran, V. and Muralidharan, V.S. (2007) Cyclic voltammetric studies on zinc transition metal alloy electrodeposition. Institute of Metal Finishing, 85 (3).

Sekar, R. and Selvi, T.C. and Eagammai, C. and Jayakrishnan, S. (2007) Chemical stripping of gold deposits from different substrates. Institute of Metal Finishing, 85 (3).

Subramanian, M. and Dhanikaivelu, N. and Ramaprabha, R. (2007) Pulsed electrodeposition of cobalt and nickel alloy. Institute of Metal Finishing, 85 (5).

Babu, B.R. and Parande, A.K. and Basha, C.A. (2007) Electrical and electronic waste: A global environmental problem. Waste Management & Research, 25. pp. 307-318.

Rajasekar, A. and Babu, T.G. and Maruthamuthu, S. and Karuthapandian, S.T. and Mohanan, S. and Palaniswamy, N. (2007) Biodegradation and corrosion behaviour of Serratia marcescens ACE2 isolated from an Indian diesel-transporting pipeline. World Journal of Microbiology and Biotechnology, 23. pp. 1065-1074.

Hariprakash, B. and Gaffoor, S.A. and Shukla, A.K. (2006) Lead-acid batteries for partial-state-of-charge applications. Journal of Power Sources, 191 (1). pp. 149-153.

Aurobind, S.V. and Amirthalingam, K.P. and Gomathi, H. (2006) Sol-gel based surface modification of electrodes for electro analysis. Advances in Colloid and Interface Science, 121 (1-3). pp. 1-7. ISSN 0001-8686

Vittal, R. and Gomathi, H. and Kim, K.J. (2006) Beneficial role of surfactants in electrochemistry and in the modification of electrodes. Advances in Colloid and Interface Science, 119 (1). pp. 55-68. ISSN 0001-8686

Thirumalai, P. and Ravi, R. and Parthiban, G.T. (2006) Potential monitoring system for corrosion of steel in concrete. Advances in Engineering Software, 37 (6). pp. 375-381. ISSN 0965-9978

Geetha, S. and Rao, C.R.K. and Vijayan, M. and Trivedi, D.C. (2006) Biosensing and drug delivery by polypyrrole. Analytica Chimica Acta, 568 (1-2). pp. 119-125. ISSN 0003-2670

Vishnudevan, M. and Thangavel, K. (2006) Evaluation of organic based corrosion inhibiting admixtures for reinforced concrete. Anti-Corrosion Methods and Materials , 53 (5). pp. 271-276. ISSN 0003-5599

Narmada, P. and Venkateswararao, M. and Venkatachari, G. and Apparao, B.V. (2006) Synergistic inhibition of carbon steel by tertiary butyl phosphonate, zinc ions and citrate. Anti-Corrosion Methods and Materials, 53 (5). pp. 310-314. ISSN 0003-5599

Sathiyanarayanan, S. and Jeyaprabha, C. and Muralidharan, S. and Venkatachari, G. (2006) Inhibition of iron corrosion in 0.5 M sulphuric acid by metal cations. Applied Surface Science, 252 (23). pp. 8107-8112. ISSN 0169-4332

Jeyaprabha, C. and Sathiyanarayanan, S. and Venkatachari, G. (2006) Effect of cerium ions on corrosion inhibition of PANI for iron in 0.5 M H2SO4. Applied Surface Science, 253 (2). pp. 432-438. ISSN 0169-4332

Sathiyanarayanan, S. and Azim, S.S. and Venkatachari, G. (2006) Corrosion resistant properties of polyaniline–acrylic coating on magnesium alloy. Applied Surface Science, 253 (4). pp. 2113-2117. ISSN 0169-4332

Visalakshi, R. and Muralidharan, V.S. (2006) Characterization of zinc–nickel alloy electrodeposits obtained from sulphamate bath containing substituted aldehydes. Bulletin of Materials Science, 29 (3). pp. 293-301. ISSN 0250-4707

Bellakki, M.B. and Prakash, A.S. and Shivakumara, C. and Hegde, M.S. and Shukla, A.K. (2006) Solution-combustion synthesis of Bi1–xLnxO1×5 (Ln = Y and La–Yb)oxide ion conductors. Bulletin of Materials Science , 29 (4). pp. 339-345. ISSN 0250-4707

Rao, C.R.K. and Trivedi, D.C. (2006) A novel one-pot synthesis of free standing Pd–PPy films: Observation of enhanced catalytic effect by Pd–Ppy layers. Catalysis Communications, 7 (9). pp. 662-668. ISSN 1566-7367

Sathiyanarayanan, S. and Panjali, N. and Saravanan, K. and Srinivasan, S. and Venkatachari, G. (2006) Corrosion monitoring of steel in concrete by galvanostatic pulse technique. Cement and Concrete Composites, 28 (7). pp. 630-637. ISSN 0958-9465

Vijayasekaran, B. and Basha, C.A. (2006) Dynamic optimization of electrochemical reactors for the exact optimal control of consecutive electrochemical reactions. Chemical Engineering Journal, 117 (3). pp. 213-221. ISSN 1385-8947

Sripriya, R. and Chandrasekaran, M. and Noel, M. (2006) Voltammetric analysis of hydroquinone, ascorbic acid, nitrobenzene and benzyl chloride in aqueous, non-aqueous, micellar and microemulsion media. Colloid and Polymer Science, 285 (1). pp. 39-48. ISSN 0303-402X

Rajagopal, G. and Maruthamuthu, S. and Mohanan, S. and Palaniswamy, N. (2006) Biocidal effects of photocatalytic semiconductor TiO2. Colloids and Surfaces B: Biointerfaces, 5 (2). pp. 107-111. ISSN 0927-7765

Muthukumar, N. and Maruthamuthu, S. and Palaniswamy, N. (2006) Water-soluble inhibitor on microbiologically influenced corrosion in diesel pipeline. Colloids and Surfaces B: Biointerfaces , 53 (2). pp. 260-270. ISSN 0927-7765

Muralidharan, V.S. and Visalakshi, R. and Vidhya, S.R. and Vedasri, V. (2006) Corrosion behaviour of glassy materials - A critical review. Corrosion Reviews, 24. pp. 1-25. ISSN 0334-6005

Natesan, M. and Venkatachari, G. and Palaniswamy, N. (2006) Kinetics of atmospheric corrosion of mild steel, zinc, galvanized iron and aluminium at 10 exposure stations in India. Corrosion Science, 48 (11). pp. 3584-3608. ISSN 0010-938X

Selvaraj, M. and Maruthan, K. and Venkatachari, G. (2006) Studies on enhancement of surface durability for steel surface by camphor oil modiWed epoxy polyamide coating. Corrosion Science, 48 (12). pp. 4365-4377. ISSN 0010-938X

Sherwood, D. and Emmanuel, B. (2006) Computing Shapes of Nanocrystals from X-ray Diffraction Data. Crystal Growth and Design, 6 (6). pp. 1415-1419. ISSN 1528-7483

Ramamoorthy, K. and Sanjeeviraja, C. and Jayachandran, M. and Sankaranarayanan, K. and Misra, P. and Kukreja, L.M. (2006) Development of a novel high optical quality ZnO thin films by PLD for III–V opto-electronic devices. Current Applied Physics, 6 (1). pp. 103-108. ISSN 1567-1739

Arun, S. and Rajendran, A. and Subramanian, P. (2006) Subcellular/tissue distribution and responses to oil exposure of the cytochrome P450-dependent monooxygenase system and glutathione S-transferase in freshwater prawns (Macrobrachium malcolmsonii, M. lamarrei lamarrei). Ecotoxicology , 15 (4). pp. 341-346. ISSN 0963-9292

Kalaiselvan, R. and Kalaiselvi, N. and Augustin, C.O. and Doh, C.H. (2006) SnO2 Pinning: An Approach to Enhance the Electrochemical Properties of Nanocrystalline CuFe2O4 for Lithium-Ion Batteries. Electrochemical and Solid-State Letters, 9 (8). A390-A394. ISSN 1099-0062

Jeyaprabha, C. and Sathiyanarayanan, S. and Venkatachari, G. (2006) Influence of halide ions on the adsorption of diphenylamine on iron in 0.5M H2SO4 solutions. Electrochimica Acta, 51 (19). pp. 4080-4088. ISSN 0013-4686

Raju, T. and Kalpanadevi, G. and Kulangiappar, K. (2006) Regioselective bromination of toluene by electrochemical method. Electrochimica Acta, 51 (22). pp. 4596-4600. ISSN 0013-4686

Kim, D.K. and Muralidharan, S. and Ha, T.H. and Bae, J.H. and Ha, Y.C. and Lee, H.G. and Scantlebury, J.D. (2006) Electrochemical studies on the alternating current corrosion of mild steel under cathodic protection condition in marine environments. Electrochimica Acta, 51 (25). pp. 5259-5267. ISSN 0013-4686

Sathiyanarayanan, S. and Muthkrishnan, S. and Venkatachari, G. (2006) Corrosion protection of steel by polyaniline blended coating. Electrochimica Acta, 51 (28). pp. 6313-6319. ISSN 0013-4686

Maryvergheese, T. and Sheela, B. (2006) Selective NO reduction using blue ferrocenyl cation. Electrochimica Acta, 52 (2). pp. 567-574. ISSN 0013-4686

Kalpana, D. and Omkumar, K.S. and Sureshkumar, S. and Renganathan, N.G. (2006) A novel high power symmetric ZnO/carbon aerogel composite electrode for electrochemical supercapacitor. Electrochimica Acta, 52 (3). pp. 1309-1315. ISSN 0013-4686

Kuppusamy, M.R. and Giridhar, V.V. (2006) Factor analysis of water quality characteristics including trace metal speciation in the coastal environmental system of Chennai Ennore. Environment International, 32 (2). pp. 174-179. ISSN 0160-4120

Manuelstephan, A. (2006) Review on gel polymer electrolytes for lithium batteries. European Polymer Journal, 42 (1). pp. 21-42. ISSN 0014-3057

Manuelstephan, A. and Nahm, K.S. and Anbukulandainathan, M. and Ravi, G. and Wilson, J. (2006) Poly(vinylidene fluoride-hexafluoropropylene) (PVdF-HFP) based composite electrolytes for lithium batteries. European Polymer Journal, 42 (8). pp. 1728-1734. ISSN 0014-3057

Kumar, K.G. and John, K.S. and lndira, C.J. (2006) A chloride ion-selective potentiometric sensor based on a polymeric schiff base complex. Indian journal of chemical technology, 13 (1). pp. 13-16. ISSN 0971-457X

Samsonnesaraj, A. and Arulraj, I. and Pattabiraman, R. (2006) Tape casting of alternate electrolyte components for solid oxide fuel cells. Indian Journal of Engineering and Materials Sciences, 13 (4). pp. 347-356. ISSN 0971-4588

Sheela, G. and Pushpavanam, M. (2006) Corrosion behaviour of electrochemically joined aluminium and titanium. Indian surface finishing, 3 (3-4). pp. 333-344. ISSN 0972-9364

Shanmugasigamani, S. and Pushpavanam, M. (2006) A noncyanide alkaline bath for Zinc-Nickel alloy deposition. Indian Surface Finishing, 3 (3-4). pp. 345-358. ISSN 0972-9364

Veeramani, P. and Silaimani, S.M. and John, S. (2006) Electroforming of Nickel-Tungsten alloy for high temperature applications. Indian Surface Finishing, 3 (3-4). pp. 359-367. ISSN 0972-9364

Shanmugam, N.V. and John, S. (2006) Electrodeposition of Chromium-Nickel-Iron alloy coatings from non-toxic electrolytes. Indian Surface Finishing , 3 (3-4). pp. 368-380. ISSN 0972-9364

Balaji, R. and Pushpavanam, M. and Yogeshkumar, K. and Subramanian, K. (2006) Electrodeposition of Copper-Tin-Ptfe composite coatings. Indian Surface Finishing, 3 (3-4). pp. 381-391. ISSN 0972-9364

Vasudevan, S. and Mohan , S. (2006) Electrochemical Preparation of Barium Chlorate from Barium Chloride. Industrial and Engineering Chemistry Research, 45 (9). pp. 2923-2928. ISSN 0888-5885

Vasudevan, S. and Mohan , S. and Sozhan, G. and Raghavendran, N.S. and Murugan, C.V. (2006) Studies on the Oxidation of As(III) to As(V) by In-Situ-Generated Hypochlorite. Industrial and Engineering Chemistry Research, 45 (22). pp. 7729-7732. ISSN 0888-5885

Sozhan, G. and Mohan , S. and Vasudevan, S. and Balaji, R. and Pushpavanam, S. (2006) Recovery of Chromium from the Solid Residue by In-Situ-Generated Hypochlorite. Industrial and Engineering Chemistry Research, 45 (23). pp. 7743-7747. ISSN 0888-5885

Basha, C.A. and Rajendran, L. (2006) Theories of Ultramicrodisc Electrodes : Review article. International Journal of Electrochemical Science, 1 (6). pp. 268-282. ISSN 1452-3981

Rameshbabu, B. and Maruthamuthu, S. and Rajasekar, A. and Muthukumar, N. and Palaniswamy, N. (2006) Microbiologically influenced corrosion in dairy effluent. International journal of environmental science and technology, 3 (2). pp. 159-166. ISSN 1735-1472

Kalpana, D. and Justinjoseyphus, R. and Sivakumar, N. and Narayanasamy, A. and Ananth, M.V. (2006) Structural, magnetic and electrochemical studies on LiCo0.5Fe0.5O2. Ionics, 12 (6). pp. 371-378. ISSN 0947-7047

Shanmugasigamani, S. and Pushpavanam, M. (2006) Role of additives in bright zinc deposition from cyanide free alkaline baths. Journal of Applied Electrochemistry, 36 (3). pp. 315-322. ISSN 0021-891X

Sekar, R. and Sobha , J. (2006) Characteristics of zinc electrodeposits from acetate solutions. Journal of Applied Electrochemistry, 36 (5). pp. 591-597. ISSN 0021-891X

Martha , S.K. and Hariprakash, B. and Gaffoor, S.A. and Shukla, A.K. (2006) Lead-acid cells with polyaniline-coated negative plates. Journal of Applied Electrochemistry, 36 (6). pp. 711-722. ISSN 0021-891X

Vijayasekaran, B and Basha, C.A. (2006) A novel approach for computing tertiary current distributions based on simplifying assumptions. Journal of Applied Electrochemistry, 36 (7). pp. 745-757. ISSN 0021-891X

Manuelstephan, A. and Nahm, K.S. and Anbukulandainathan, M. and Ravi, G. and Wilson, J. (2006) Electrochemical studies on nanofiller incorporated poly(vinylidene fluoride– hexafluoropropylene) (PVdF–HFP) composite electrolytes for lithium batteries. Journal of Applied Electrochemistry, 36 (10). pp. 1091-1097. ISSN 0021-891X

Jeyaprabha, C. and Sathiyanarayanan, S. and Venkatachari, G. (2006) Polyaniline as Corrosion Inhibitor for Iron in Acid Solutions. Journal of Applied Polymer Science, 101 (4). pp. 2144-2153. ISSN 0021-8995

Sathiyanarayanan, S. and Muthukrishnan, S. and Venkatachari, G. (2006) Effects of Polyaniline Content in Chlorrub-Based Coatings on Corrosion Protection of Steel. Journal of Applied Polymer Science, 102 (4). pp. 3994-3999. ISSN 0021-8995

Martha, S.K. and Hariprakash, B. and Gaffoor, S.A. and Trivedi, D.C. and Shukla, A.K. (2006) A low-cost lead-acid battery with high specific-energy. Journal of Chemical Sciences, 118 (1). pp. 93-98. ISSN 0974-3626

Velayutham, D. and Jayaraman, K. and Kulangiappar , K. and Ilayaraja, N. and Rambabu, Y. and Santhanrao, P. and Narayanareddy, S. and Victorbabu, K. and Noel, M. (2006) Free radical and isomerisation processes during the electrochemical fluorination of n-butyryl chloride, i-butyryl chloride and pivaloyl chloride in anhydrous hydrogen fluoride. Journal of Fluorine Chemistry, 127 (8). pp. 1111-1118. ISSN 0022-1139

Murali, K.R. and Ziaudeen, M. and Jayaprakash, N. (2006) Characteristics of brush plated ZnTe thin films. Journal of Materials Science, 41 (7). pp. 1887-1892. ISSN 0022-2461

Murali, K.R. and Rajkumar, P.R. (2006) Characteristics of pulse plated ZnTe films. Journal of Materials Science: Materials in Electronics, 17 (5). pp. 393-396. ISSN 0957-4522

Murali, K.R. and Trivedi, D.C. (2006) Preparation of pulse plated GaAs films. Journal of Physics and Chemistry of Solids, 67 (7). pp. 1432-1435. ISSN 0022-3697

Balakrishnan, P.G. and Ramesh, R. and Premkumar, T. (2006) Safety mechanisms in lithium-ion batteries. Journal of Power Sources, 155 (2). pp. 401-414. ISSN 0378-7753

Kalpana, D. and Justinjoseyphus, R. and Venkateswaran, C. and Narayanasamy, A. and Ananth, M.V. (2006) Influence of magnetic properties on electrochemical activity of LiNi0.5Fe0.5O2. Journal of Power Sources, 156 (2). pp. 598-603. ISSN 0378-7753

Raman, R.K. and Shukla, A.K. and Gayen, A. and Hegde, M.S. and Priolkar, K.R. and Sarode, P.R. and Emura, S. (2006) Tailoring a Pt–Ru catalyst for enhanced methanol electro-oxidation. Journal of Power Sources, 157 (1). pp. 45-55. ISSN 0378-7753

Kalaiselvan, R. and Kalaiselvi, N. and Augustin, C.O. and Doh, C.H. and Sanjeeviraja, C. (2006) CuFe2O4/SnO2 nanocomposites as anodes for Li-ion batteries. Journal of Power Sources, 157 (1). pp. 522-527. ISSN 0378-7753

Kalpana, D. and Renganathan, N.G. and Pitchumani, S. (2006) A new class of alkaline polymer gel electrolyte for carbon aerogel supercapacitors. Journal of Power Sources, 157 (1). pp. 621-623. ISSN 0378-7753

Vijayasekaran, B. and Basha, C.A. (2006) Shrinking core discharge model for the negative electrode of a lead-acid battery. Journal of Power Sources, 158 (1). pp. 710-721. ISSN 0378-7753

Vatsalarani, J. and Geetha, S. and Trivedi, D.C. and Warrier, P.C. (2006) Stabilization of zinc electrodes with a conducting polymer. Journal of Power Sources, 158 (2). pp. 1484-1489. ISSN 0378-7753

Ganesh, V. and Pitchumani, S. and Lakshminarayanan, V. (2006) New symmetric and asymmetric supercapacitors based on high surface area porous nickel and activated carbon. Journal of Power Sources, 158 (2). pp. 1523-1532. ISSN 0378-7753

Muthulakshmi, B. and Kalpana, D. and Pitchumani, S. and Renganathan, N.G. (2006) Electrochemical deposition of polypyrrole for symmetric supercapacitors. Journal of Power Sources, 158 (2). pp. 1533-1537. ISSN 0378-7753

Manuelstephan, A. and Nahm, K.S. and Premkumar, T. and Anbukulandainathan, M. and Ravi, G. and Wilson, J. (2006) Nanofiller incorporated poly(vinylidene fluoride–hexafluoropropylene) (PVdF–HFP) composite electrolytes for lithium batteries. Journal of Power Sources, 159 (2). pp. 1316-1321. ISSN 0378-7753

Periasamy, P. and Kalaiselvi, N. (2006) Electrochemical performance behavior of combustion-synthesized LiNi0.5Mn0.5O2 lithium-intercalation cathodes. Journal of Power Sources, 159 (2). pp. 1360-1364. ISSN 0378-7753

Prasad, D. and Sivaram, T.K. and Sheela, B. and Yegnaraman, V. (2006) Microbial fuel cell constructed with a micro-organism isolated from sugar industry effluent. Journal of Power Sources, 160 (2). pp. 991-996. ISSN 0378-7753

Sathaiyan, N. and Nandakumar, V. and Ramachandran, P. (2006) Hydrometallurgical recovery of silver from waste silver oxide button cells. Journal of Power Sources, 161 (2). pp. 1463-1468. ISSN 0378-7753

Raman, R.K. and Prashant, S.K. and Shukla, A.K. (2006) A 28-W portable direct borohydride–hydrogen peroxide fuel-cell stack. Journal of Power Sources, 162 (2). pp. 1073-1076. ISSN 0378-7753

Sheela, B. and Nirmal, R.G. and Prabaharan, G. and Mishra, A.K. and Yegnaraman, V. (2006) Solution phase electron transfer versus bridge mediated electron transfer across carboxylic acid terminated thiols. Journal of solid state electrochemistry, 10 (7). pp. 439-446. ISSN 1432-8488

Ramalechume, C. and Yegnaraman, V. and Mandal, A.B. (2006) Electrochemical rectification at electrode surface modified with poly (acrylic acid) and decane thiol. Journal of Solid State Electrochemistry, 10 (7). pp. 499-505. ISSN 1432-8488

Senthilkumar, S. and Mathiyarasu, J. and Phani, K.L.N. and Yegnaraman, V. (2006) Simultaneous determination of dopamine and ascorbic acid on poly (3,4-ethylenedioxythiophene) modified glassy carbon electrode. Journal of Solid State Electrochemistry, 10 (11). pp. 905-913. ISSN 1432-8488

Jeyaprabha, C. and Sathiyanarayanan, S. and Muralidharan, S. and Venkatachari, G. (2006) Corrosion Inhibition of Iron in 0.5 mol L-1 H2SO4 by Halide Ions. Journal of the Brazilian Chemical Society, 17 (1). pp. 61-67. ISSN 0103-5053

Song, C.H. and Stephan, A.M. and Jeong, S.K. and Hwang, Y.J. and Kim, A.R. and Nahm, K.S. (2006) Influence of Solvents on the Structural and Electrochemical Properties of Li†Li0.2Ni0.1Co0.2Mn0.5‡O2 Prepared by a Solvothermal Reaction Method. Journal of the Electrochemical Society, 153 (2). A390-A395. ISSN 0013-4651

Sivashanmugam, A. and Thirunakaran, R. and Zou, M. and Yoshio, M. and Yamaki, J.I. and Gopukumar, S. (2006) Glycine-Assisted Sol-Gel Combustion Synthesis and Characterization of Aluminum-Doped LiNiVO4 for Use in Lithium-Ion Batteries. Journal of the Electrochemical Society, 153 (3). A497-A503. ISSN 0013-4651

Choudhury, N.A. and Shukla, A.K. and Sampath, S. and Pitchumani, S. (2006) Cross-Linked Polymer Hydrogel Electrolytes for Electrochemical Capacitors. Journal of the Electrochemical Society, 153 (3). A614-A620. ISSN 0013-4651

Murali, K.R. and Elango, P. and Gopalakrishnan, P. (2006) Structural and optical properties of CdSe films brush plated on low temperature substrates. Materials Chemistry and Physics, 96 (1). pp. 103-106. ISSN 0254-0584

Rameshbapu, G.N.K. and Jayakrishnan, S. (2006) Oxidation characteristics of electrodeposited nickel–zirconia composites at high temperature. Materials Chemistry and Physics, 96 (2-3). pp. 321-325. ISSN 0254-0584

Johnberchmans, L. and Sivan, V. and Venkatakrishnaiyer, S. (2006) Studies on triazole derivatives as inhibitors for the corrosion of muntz metal in acidic and neutral solutions. Materials Chemistry and Physics, 98 (2-3). pp. 395-400. ISSN 0254-0584

Kalaiselvan, R. and Augustin, C.O. and Sanjeeviraja, C. and Pol, V.G. and Gedanken, A. (2006) Optimization of sintering on the structural, electrical and dielectric properties of SnO2 coated CuFe2O4 nanoparticles. Materials Chemistry and Physics, 99 (1). pp. 109-116. ISSN 0254-0584

Rao, C.R.K. and Trivedi, D.C. (2006) Biphasic synthesis of fatty acids stabilized silver nanoparticles: Role of experimental conditions on particle size. Materials Chemistry and Physics, 99 (2-3). pp. 354-360. ISSN 0254-0584

Muralidharan, S. and Ha, T.H. and Bae, J.H. and Ha, Y.C. and Lee, H.G. and Park, K.W. and Kim, D.K. (2006) Electrochemical studies on the solid embeddable reference sensors for corrosion monitoring in concrete structure. Materials Letters, 60 (5). pp. 651-655. ISSN 0167-577X

Elangovan, M. and Muthukumaran, A. and Anbukulandainathan, M. (2006) Comparison of solid state studies and electrochemical behavior of poly (dimethylsilane) and poly (dimethylstannum) film electrodes. Materials Letters, 60 (8). pp. 1099-1105. ISSN 0167-577X

Rao, C.R.K. and Lakshminarayanan, V. and Trivedi, D.C. (2006) Synthesis and characterization of lower size, laurylamine protected palladium nanoparticles. Materials Letters, 60 (26). pp. 3165-3169. ISSN 0167-577X

Natesan, M. and Palaniswamy, N. and Rengaswamy, N.S. (2006) Atmospheric corrosivity Survey of India. Materials Performance, 45 (1). pp. 52-56. ISSN 0094-1492

Palraj, S. and Venkatachari, G. (2006) Corrosion and bio fouling characteristics of mild steel in Mandapam waters. Materials Performance, 45 (6). pp. 46-50. ISSN 0094-1492

Bhaskaran, R. and Palaniswamy, N. and Rengaswamy, N.S. (2006) Life-cycle cost analysis of a concrete road bridge across open sea. Materials Performance, 45 (10). pp. 51-55. ISSN 0094-1492

Porkodi, P. and Yegnaraman, V. and Jeyakumar, D. (2006) Polyol mediated synthesis of tungsten trioxide and Ti doped tungsten trioxide Part 1: Synthesis and characterisation of the precursor material. Materials Research Bulletin, 41 (8). pp. 1476-1486. ISSN 0025-5408

Manuelstephan, A. and Premkumar, T. and Ramesh, R. and Thomas, S. and Jeong, S.K. and Nahm, K.S. (2006) Pyrolitic carbon from biomass precursors as anode materials for lithium batteries. Materials Science and Engineering A, 430 (1-2). pp. 132-137. ISSN 0921-5093

Murali, K.R. and Balasubramanian, M. (2006) Properties of pulse plated ZnSe films. Materials Science and Engineering: A, 431 (1-2). pp. 118-122. ISSN 0921-5093

Ganesan, M. and Sundararajan, S. and Dhananjeyan, M.V.T. and Sarangapani, K.B. and Renganathan, N.G. (2006) Synthesis and characterization of tetravalent titanium (Ti4+) substituted LiCoO2 for lithium-ion batteries. Materials Science and Engineering B, 131 (1-3). pp. 203-209. ISSN 0921-5107

Harikrishnan, K. and John, S. and Srinivasan, K.N. and Praveen, J. and Ganesan, M. and Kavimani, P.M. (2006) An Overall Aspect of Electroless Ni-P Depositions—A Review Article. Metallurgical and Materials Transactions A, 37 (6). pp. 1917-1926. ISSN 1073-5623

Saaminathan, V. and Murali, K.R. (2006) Variation of Nd and Vfb for different compositions of CdSexTe1-x thin films by pulse plating technique. Physica B: Condensed Matter, 373 (2). pp. 233-239. ISSN 0921-4526

Murali, K.R. and Trivedi, D.C. (2006) Preparation and characterization of pulse electrodeposited GaAs films. Physica Status Solidi A, 203 (5). pp. 874-877. ISSN 1862-6300

Wilson, J. and Ravi, G. and Anbukulandainathan, M. (2006) Electrochemical Studies on Inert Filler Incorporated Poly (Vinylidene Fluoride – Hexafluoropropylene) (PVDF – HFP) Composite Electrolytes. Polímeros, 16 (2). pp. 88-93. ISSN 0104-1428

Azim, S.S. and Satheesh, A. and Ramu, K.K. and Ramu, S. and Venkatachari, G. (2006) Studies on graphite based conductive paint coatings. Progress in Organic Coatings, 55 (1). pp. 1-4. ISSN 0021-8995

Sathiyanarayanan, S. and Muthukrishnan, S. and Venkatachari, G. (2006) Performance of polyaniline pigmented vinyl acrylic coating on steel in aqueous solutions. Progress in Organic Coatings, 55 (1). pp. 5-10. ISSN 0021-8995

Venkatesan, P. and Palaniswamy, N. and Rajagopal, K. (2006) Corrosion performance of coated reinforcing bars embedded in concrete and exposed to natural marine environment. Progress in Organic Coatings, 56 (1). pp. 8-12. ISSN 0021-8995

Sathiyanarayanan, S. and Devi, S. and Venkatachari, G. (2006) Corrosion protection of stainless steel by electropolymerised pani coating. Progress in Organic Coatings, 56 (2-3). pp. 114-119. ISSN 0021-8995

Azim, S.S. and Sathiyanarayanan, S. and Venkatachari, G. (2006) Anticorrosive properties of PANI–ATMP polymer containing organic coating. Progress in Organic Coatings, 56 (2-3). pp. 154-158. ISSN 0021-8995

Krishnan, S.M. (2006) Studies on corrosion resistant properties of sacrificial primed IPN coating systems in comparison with epoxy–PU systems. Progress in Organic Coatings, 57 (4). pp. 383-391. ISSN 0021-8995

Joseph, J. and Son, K.M. and Lee, W. and Kim, K.J. (2006) Quasi-solid-state dye-sensitized solar cells with siloxane poly(ethylene glycol) hybrid gel electrolyte. Semiconductor Science and Technology, 21 (5). pp. 697-701. ISSN 0268-1242

Sivakumar, R. and Gopalakrishnan, R. and Jayachandran, M. and Sanjeeviraja, C. (2006) Investigation of x-ray photoelectron spectroscopic (XPS), cyclic voltammetric analyses ofWO3 films and their electrochromic response in FTO/WO3/electrolyte/FTO cells. Smart Materials and Structures, 15 (3). pp. 877-888. ISSN 0964-1726

Murali, K.R. and Austine, A. and Jayasutha, B. and Trivedi, D.C. (2006) Photoelectrochemical cells based on CdSe films brush plated on high-temperature substrates. Solar Energy Materials and Solar Cells, 90 (6). pp. 753-759. ISSN 0927-0248

Sivakumar, R. and Manisankar, P. and Jayachandran, M. and Sanjeeviraja, C. (2006) Intercalation studies on electron beam evaporated MoO3 films for electrochemical devices. Solar Energy Materials and Solar Cells , 90 (15). pp. 2438-2448. ISSN 0927-0248

Kalaiselvan, R. and Augustin, C.O. and Sanjeeviraja, C. and Prabhakaran, D. (2006) Effect of SnO2 coating on the magnetic properties of nanocrystalline CuFe2O4. Solid State Communications, 137 (9). pp. 512-516. ISSN 0038-1098

Murali, K.R. and Ziaudeen, M. and Jayaprakash, N. (2006) Structural and electrical properties of brush plated ZnTe films. Solid-State Electronics, 50. pp. 1692-1695. ISSN 0038-1101

Tietz, F. and Arulraj, I. and Zahid, M. and Stover, D. (2006) Electrical conductivity and thermal expansion of La0.8Sr0.2(Mn,Fe,Co)O3-y perovskites. Solid State Ionics, 177 (19-25). pp. 1753-1756. ISSN 0167-2738

Zahid, M. and Arulraj, I. and Fischer, W. and Tietz, F. and Serraalfaro, J.M. (2006) Synthesis and investigations on the stability of La0.8Sr0.2CuO2.4+δ at high temperatures. Solid State Ionics, 177. pp. 3205-3210. ISSN 0167-2738

Subramanian, B. and Mohan, S. and Sobha, J. (2006) Structural, microstructural and corrosion properties of brush plated copper–tin alloy coatings. Surface & Coatings Technology, 201 (3-4). pp. 1145-1151. ISSN 0257-8972

Balaji, R. and Pushpavanam, M. and Yogeshkumar, K. and Subramanian, K. (2006) Electrodeposition of bronze–PTFE composite coatings and study on their tribological characteristics. Surface & Coatings Technology, 201 (6). pp. 3205-3211. ISSN 0257-8972

Savarimuthu, E. and Sankarasubramanian, N. and Subramanian, B. and Jayachandran, M. and Sanjeeviraja, C. and Ramamurthy, S. (2006) Preparation and characterisation of nanostructured tin oxide (SnO,) films by sol-gel spin coating technique. Surface Engineering, 22 (4). pp. 268-276. ISSN 0267-0844

Mukherjee, D. and Khan, A.A. and Kumar, M.R. and Mukherjee, S. and Alagappan, A.N. and Nagarajan, P. and Nesarajl, A.S. and Ghosh, S. and Muzhumathi, S. (2006) Metastable surface modification processes for corrosion and oxidation control. Surface Engineering, 22 (5). pp. 411-416. ISSN 0267-0844

Subramanian, B. and Jayachandran, M. and Jayakrishnan, S. (2006) Surface characterisation studies of nickel-chromium PVD: EB evaporated low carbon steel samples. Surface Engineering, 22 (6). pp. 447-451. ISSN 0267-0844

Vijayalakshmi, R. and Jayachandran, M. and Trivedi, D.C. and Sanjeeviraja, C. (2006) Characterization of WO3 Thin Films Prepared at Different Deposition Currents on CTO Substrates. Synthesis and Reactivity in Inorganic, Metal-Organic and Nano-Metal Chemistry, 36 (1). pp. 89-94. ISSN 1553-3174

Kalaiselvan, R. and Augustin, C.O. and Sanjeeviraja, C. (2006) Characterization of SnO2-Coated CuFe2O4 Nanocomposites. Synthesis and Reactivity in Inorganic, Metal-Organic, and Nano-Metal Chemistry, 36 (1). pp. 115-119. ISSN 1553-3174

Sankar, S. and Paruthimalkalaignan, G. and Sankarasubramanian, M. and Amutha, K. and Marikkannu, K.R. and Vasudevan, T. and Selvaraj, M. (2006) Innovative Nanoparticle Clear Coat by IPN-Ceramic Pigments. Synthesis and Reactivity in Inorganic, Metal-Organic, and Nano-Metal Chemistry , 36 (2). pp. 197-201. ISSN 1553-3174

Sathiyanarayanan, S. and Muthukrishnan, S. and Venkatachari, G. (2006) Synthesis and anticorrosion properties of polydiphenylamine blended vinyl coatings. Synthetic Metals, 156. pp. 1208-1212. ISSN 0379-6779

Raju, T. and Kulangiappar, K. and Anbukulandainathan, M. and Uma, U. and Malini, R. and Muthukumaran, A. (2006) Site directed nuclear bromination of aromatic compounds by an electrochemical method. Tetrahedron Letters, 47 (27). pp. 4581-4584. ISSN 0040-4039

Subramanian, B. and Jayachandran, M. and Jayakrishnan, S. (2006) Sequential deposition of Cu-Ni by electron beam evaporation and its characterisation. Transactions of the Institute of Metal Finishing, 84 (1). pp. 52-55. ISSN 0020-2967

Rao, C.R.K. and Pushpavanam, M. (2006) Electrodeposition of platinum from platinum-ammine based baths. Transactions of the Institute of Metal Finishing, 84 (2). pp. 79-82. ISSN 0020-2967

Ravindran, V. and Jayakrishnan, S. (2006) Investigations on recovery of heavy metals from plating effluents. Transactions of the Institute of Metal Finishing, 84 (4). pp. 202-205. ISSN 0020-2967

Shanmugasigamani, S. and Pushpavanam, M. (2006) Bright zinc-cobalt alloy deposits from an alkaline non-cyanide bath. Transactions of the Institute of Metal Finishing, 84 (6). pp. 326-331. ISSN 0020-2967

Noel, M. and Vijayabarathi, T. and Velayutham, D. and Jayaraman, K. (2006) The role of Ce(IV)/Ce(III) Redox Mediator in Indirect Electrochemical Oxidations. transactions of SAEST, 41 (1). pp. 12-17.

Tietz, F. and Arulraj, I. and Stover, D. (2006) Statistical design of experiments for evaluation of Y-Zr-Ti oxides as anode materials in solid oxide fuel cells. British Ceramic Transactions, 103 (5). pp. 202-210. ISSN 0967-9782

Kuppusamy, M.R. and Giridhar, V.V. (2006) Trace metal speciation in environmental aquartic samples of palar river, Mahabalipuram and its adjoining coast. Bulletin of Electrochemistry, 20 (3). pp. 119-124. ISSN 0256-1654

Doh, J.G. and Hong, J.S. and Vittal, R. and Kang, M.G. and Park, N.G. and Kim, K.J. (2006) Enhancement of photocurrent and photovoltage of dye-sensitized solar cells with TiO2 film deposited on indium zinc oxide substrate. Chemistry of Materials, 16 (3). pp. 493-497. ISSN 0897-4756

Selvi, P. and Ramasami, M. and Samuel, M.H.P. and Adaikkalam, P. and Srinivasan, G.N. (2006) Recovery of Gallium from Bayer Liquor Using Chelating Resins in Fixed-Bed Columns. Industrial and Engineering Chemistry Research, 43 (9). pp. 2216-2221. ISSN 0888-5885

Vedalakshmi, R. and Sundara Rajit, A. and Srinivasan, S. and Ganesh Babu, K. (2005) Effect of magnesium and sulphate ions on the sulphate resistance of blended cements in lowand medium-strength concretes. Advances in Cement Research, 17 (2). pp. 47-55.

Bhaskaran, R. and Palaniswamy, N. and Rengaswamy, N.S. and Jayachandran, M. (2005) A review of differing approaches used to estimate the cost of corrosion (and their relevance in the development of modern corrosion prevention andp control strategies). ANTI-CORROSION METHODS AND MATERIALS. pp. 29-41.

Parande, A.K. and Muralidharan, S. and Saraswathy, V. and Palaniswamy, N. (2005) Influence of microbiologically induced corrosion of steel embedded in ordinary portland pozzolona cement. ANTI-CORROSION METHODS AND MATERIALS, 52 (3). pp. 148-153.

Ramesh bapu, B. and Thangavelu, K. (2005) The effect of isomers of some organic compounds as inhibitors for the corrosion of carbon steel in sulfuric acid. ANTI-CORROSION METHODS AND MATERIALS, 52 (4). pp. 219-225.

Sathiyanarayanan, S. and Marikkannu, C. and Palaniswamy, N.S. (2005) Corrosion inhibition effect of tetramines for mild steel in 1M HCl. Applied Surface Science, 241. pp. 477-484.

Jeyprabha, C. and Sathiyanarayanan, S. and Venkatachari, G. (2005) Corrosion inhibition of pure iron in 0.5 M H2SO4 solutions by ethanolamines. Applied Surface Science, 246. pp. 108-116.

Jeyaprabha, C. and Sathiyanarayanan, S. and Phani, K.L.N. and Venkatachari, G. (2005) Influence of poly(aminoquinone) on corrosion inhibition of iron in acid media. Applied Surface Science, 252. pp. 966-975.

Muralidharan, S. and Vedalakshmi, R. and Saraswathy, V. and James, J. and Palaniswamy, N. (2005) Studies on the aspects of chloride ion determination in different types of concrete under macro-cell corrosion conditions. Building and Environment, 40. pp. 1275-1281.

Zou, M. and Yoshio, M. and Gopukumar, S. and Yamaki, J. (2005) Performance of LiMo.osCoo.9~02C athode Materials in Lithium Rechargeable Cells When Cycled up to 4.5 V. Chemistry of Materials.

Raju, T. and Basha, C.A. (2005) Electrochemical cell design and development for mediated electrochemical oxidation-Ce(III)/Ce(IV)system. Chemical Engineering Journal, 114. pp. 55-65.

Natesan, M. and Venkatachari, G. and Palaniswamy, N. (2005) Corrosivity and durability maps of India. Corrosion Prevention and Control. pp. 43-54.

Geetha, S. and Satheesh Kumar, K.K. and Trivedi, D.C. (2005) Polyaniline reinforced conducting E-glass fabric using 4-chloro-3-methyl phenol as secondary dopant for the control of electromagnetic radiations. Composites Science and Technology, 65. pp. 973-980.

Chepuri Rao, R.K. and Trivedi, D.C. (2005) Chemical and electrochemical depositions of platinum group metals and their applications. Coordination Chemistry Reviews, 249. pp. 613-631.

Mohanan, S. and Rajasekar, A. and Muthukumar, N. and Maruthamuthu, S. and Palaniswamy, N. (2005) The role of fungi on diesel degradation, and their influence on corrosion of APl 5LX steel. Corrosion Prevention and Control. pp. 123-130. (Unpublished)

Mohanan, S. and Maruthamuthu, S. and Ponmariappan, S. and Venkatachari, G. and Palaniswamy, N. (2005) Microbiologically induced corrosion of copper. Corrosion Reviews, 23 (2-3). pp. 233-245.

Sathiyanarayanan, S. and Rajagopal, G. and Palaniswamy, N. and Raghavan, M. (2005) Corrosion protection by chemical vapor deposition: A review. Corrosion Reviews, 23 (4-6). pp. 355-370.

Panjali, N. and Sathiyanarayanan, S. and Venkatachari, G. and Srinivasan, S. and Ramakrishnan, K.R. (2005) A high current RCC monitor for corrosion studies. Corrosion Reviews, 23 (4). pp. 371-377.

Mohanan, S. and Maruthamuthu, S. and Kalaiselvi, N. and Palaniappan, R. and Venkatachari, G. and Palaniswamy, N. and Raghavan, M. (2005) Role of quaternary ammonium compounds and atmp on biocidal effect and corrosion of mild steel and copper. Corrosion Reviews. pp. 425-443.

Rajasekar, A. and Maruthamuthu, S. and Muthukumar, N. and Mohanan, S. and Subramanian, P. and Palaniswamy, N. (2005) Bacterial degradation of naphtha and its influence on corrosion. Corrosion Science, 47. pp. 257-271.

Thirumalai, P. and Ravi, R. and Parthiban, G.T. and Srinivasan, S. and Ramakrishnan, K.R. and Raghavan, M. (2005) Neural network analysis for corrosion of steel in concrete. Corrosion Science, 47. pp. 1625-1642.

Satheesh Kumar, K.K. and Geetha, S. and Trivedi, D.C. (2005) Freestanding conducting polyaniline film for the control of electromagnetic radiations. Current Applied Physics, 5. pp. 603-608.

Maruthamuthu, S. and Rajasekar, A. and Sathiyanarayanan, S. and Muthukumar, N. and Palaniswamy, N. (2005) Electrochemical behaviour of microbes on orthodontic wires. Current Science, 89 (6). pp. 988-996.

Senthilkumar, S. and Mathiyarasu, J. and Phani, K.L.N. and Yogendrakumar, J. and Yegnaraman, V. (2005) Determination of Uric Acid in the Presence of Ascorbic Acid Using Poly(3,4-ethylenedioxythiophene)-Modified Electrodes. Electroanalysis, 17 (24). pp. 2281-2286.

Martha, K.S. and Hariprakash, B. and Gaffoor, S.A. and Trivedi, D.C. and Shukla, A.K. (2005) High Specific-Energy Lead-Acid Batteries Through Organic Metals. Electrochemical and solid state letters, 8 (7). pp. 353-356.

Vijayasekaran, B. and Basha, C.A. (2005) Evaluation and improvement of dynamic optimality in electrochemical reactors. Electrochimica Acta, 51. pp. 200-207.

Raju, T. and Kulangiappar, K. and Anbukulandainathan, M. and Shankar, G.K. and Muthukumaran, A. (2005) Electrochemical chlorination of toluene by two-phase electrolysis. Electrochimica Acta, 51. pp. 356-360.

Stephan, A.M. and Gopukumar, S. and Renganathan, N.G. and Anbukulandainathan, M. (2005) Characterization of poly(vinylidene fluoride–hexafluoropropylene) (PVdF–HFP) electrolytes complexed with different lithium salts. European Polymer Journal, 41 (1). pp. 15-21.

Elangovan, M. and Muthukumaran, A. and Anbukulandainathan, M. (2005) Novel electrochemical synthesis and characterisation of poly(methyl vinylsilane) and its co-polymers. European Polymer Journal, 41 (10). pp. 2450-2460.

Shukla, A.K. and Raman, R.K. and Scott, K. (2005) Advances in mixed reactant fuel cells. Fuel cells, 5 (4). pp. 436-447.

Vasudevan, S. and Sozhan, G. and Mohan, S. and Pushpavanam, S. (2005) An electrochemical process for the separation of cerium from rare earths. Hydrometallurgy, 76 (1). pp. 115-121.

Basavaraja, C. and Kulkarni, V.R. and Vishnuvardhan, T.K. and Mohan, S. and Iyer, Y.M. and Subba Rao, G.V. (2005) Simulation of the effect of oxalic acid and acetone on the bistabel behaviour of the minimal bromate oscillator in a CSTR. Indian Journal of Chemistry, 44A (10). pp. 1984-1987.

Sheela, G. and Muralidharan, V.S. and Malathy, P. (2005) Corrosion behaviour of electrochemically joined aluminum and stainless steel. Indian Journal of Chemical Technology, 12. pp. 466-471.

Singh, I.B. and Venkatachari, G. and Singh, D.R. and Singh, M. and Yagneswaran, A.H. (2005) Effect of Cr(V1) - Fe(I1) interaction on the corrosion resistances of iron at different pH in dichromate solutions. Indian Journal of Chemical Technology, 12. pp. 635-640.

Balasubramanian, N. and Yeh, M.L. and Chang, C.T. and Chen, S.J. (2005) Hierarchical Petri Nets for Modeling Metabolic Phenotype in Prokaryotes. Industrial and Engineering Chemical Research, 44 (70). pp. 2218-2240.

Hariprakash, B. and Martha, S.K. and Hedge, M.S. and Shukla, A.K. (2005) A sealed, starved-electrolyte nickel–iron battery. Journal of Applied Electrochemistry, 35 (1). pp. 27-32.

Noel, M. and Suriyanarayanan, N. (2005) Electrochemistry of metals and semiconductors in fluoride media. Journal of Applied Electrochemistry, 35 (1). pp. 49-60.

Fey, G.T. and Chen, J.G. and Premkumar, T. (2005) Enhanced cyclability of LiCoO2 cathodes coated with alumina derived from carboxylate–alumoxanes. Journal of Applied Electrochemistry, 35 (2). pp. 177-184.

Mathiyarasu, J. and Senthilkumar, S. and Phani, K.L.N. and Yegnaraman, V. (2005) Selective detection of dopamine using a functionalised polyaniline composite electrode. Journal of Applied Electrochemistry, 35 (5). pp. 513-519.

Shivashanmugam, A. and Premkumar, T. and Gopukumar, S. and Renganathan, N.G. and Wohlfahrt-Mehrens, M. and Garche, J. (2005) Synthesis and electrochemical behaviour of tin oxide for use as anode in lithium rechargeable batteries. Journal of Applied Electrochemistry, 35 (11). pp. 1045-1050.

Thirunakaran, R. and Vasudevan, S. and Muniyandi, N. and Shivashanmugam, A. and Gopukumar, S. (2005) Performance characteristics of organic–inorganic composite electrodes in magnesium reserve batteries. Journal of Applied Electrochemistry, 35 (11). pp. 1141-1144.

Raman, R.K. and Shukla, A.K. (2005) Electro-reduction of hydrogen peroxide on iron tetramethoxy phenyl porphyrin and lead sulfate electrodes with application in direct borohydride fuel cells. Jurnal of Applied Electrochemistry, 35. pp. 1157-1161.

Geetha, S. and Satheesh Kumar, K.K. and Trivedi, D.C. (2005) Improved Method to Graft Polyaniline on E-Glass Fabric to Enhance Its Electronic Conductivity. Journal of Applied Polymer Science, 96 (6). pp. 2316-2323.

Geetha, S. and Satheesh Kumar, K.K. and Trivedi, D.C. (2005) Conducting fabric reinforced polyaniline film using p-chlorophenol as secondary dopant for the control of electromagnetic radiations. Journal of Composite Materials, 39 (7). pp. 647-658.

Saaminathan, V. and Murali, K.R. (2005) Importance of pulse reversal effect of CdSe thin films for optoelectronic devices. Journal of Crystal Growth, 279 (3). pp. 229-240.

Shriram, S. and Renganathan, N.G. and Ganesan, M. and Dhananjeyan, M.V.T. (2005) Theoretical prediction of state of charge of lithium ion cells. Journal of Electroanalytical Chemistry, 576 (1). pp. 43-47.

Senthil Kumar, S. and Mathiyarasu, J. and Phani, K.L.N. (2005) Exploration of synergism between a polymer matrix and gold nanoparticles for selective determination of dopamine. Journal of Electroanalytical Chemistry, 578 (1). pp. 95-103.

Ramalechume, C. and Sheela, B. and Yegnaraman, V. and Mandal, A.B. (2005) Electron transfer studies through mixed self-assembled monolayers of thiophenol and thioctic acid. Journal of Electroanalytical Chemistry, 580 (1). pp. 122-127.

Jeyaprabha, C. and Sathiyanarayanan, S. and Venkatachari, G. (2005) Co-adsorption effect of polyaniline and halide ions on the corrosion of iron in 0.5 M H2SO4 solutions. Journal of Electroanalytical Chemistry, 583 (2). pp. 232-240.

Raghupathy, P. and Mathiyarasu, J. and Joseph, J. and Phani, K.L.N. and Yegnaraman, V. (2005) Hydrotrope-driven disruption of micellar encapsulants for voltammetric detection of triclosan. Journal of Electroanalytical Chemistry, 584 (2). pp. 210-214.

Jeyaprabha, C. and Sathiyanarayanan, S. and Phani, K.L.N. and Venkatachari, G. (2005) Investigation of the inhibitive effect of poly(diphenylamine) on corrosion of iron in 0.5 M H2SO4 solutions. Journal of Electroanalytical Chemistry, 585. pp. 250-255.

Shukla, A.K. (2005) Fuelling future cars. Journal of Indian Institute of Science, 85. pp. 51-65.

Kal, S.H. and Joseph, J. and Lee, J. and Kima, K.J. (2005) Enhancement in Performance of Dye-Sensitized Solar Cells Modified with In Situ Photopolymerized PDEA in TiO2 Films. Journal of the Electrochemical Society, 152. A1378-A1381.

Vatsalarani, J. and Trivedi, D.C. and Ragavendran, K. and Warrier, P.C. (2005) Effect of Polyaniline Coating on “Shape Change” Phenomenon of Porous Zinc Electrode. Journal of the Electrochemical Society, 152 (10). pp. 1974-1978.

Suresh, P. and Shukla, A.K. and Munichandran, N. (2005) Electrochemical Properties of LiMn1−xMxO2 „M = Ni, Al, Mg… as Cathode Materials in Lithium-Ion Cells. Journal of the Electrochemical Soceity, 152 (12). pp. 2273-2280.

Geetha, S. and Trivedi, D.C. (2005) Synthesis, characterization and temperature studies on the conductivity of AlCl−4 ion doped polypyrrole. Journal of Materials Science: Materials in Electronics, 16 (6). pp. 329-333.

Kalyani, P. and Sivasubramanian, S. and Prabhu, S.N. and Ragavendran, K. and Kalaiselvi, N. and Renganathan, N.G. and Madhu, S. and Sundararaj, A. and Manoharan, SP. and Jagannathan, R. (2005) Solid state opto-impedance of LiNiVO4 and LiMn2O4. Journal of Physics D - Applied Physics, 38 (7). pp. 990-996.

Sherwood, D. and Raghavendran, K. and Emmanuel, B. (2005) Madelung-Buckingham Model as Applied to the Prediction of Voltage, Crystal Volume Changes, and Ordering Phenomena in Spinel-Type Cathodes for Lithium Batteries. Journal of Physical Chemistry - B, 109 (26). pp. 12791-12794.

Sivashanmugam, A. and Premkumar, T. and Renganathan, N.G. and Gopukumar, S. and Wohlfahrt-Mehrens, M. and Grche, J. (2005) Electrochemical behavior of Sn/SnO2 mixtures for use as anode in lithium rechargeable batteries. Journal of Power Sources, 144 (1). pp. 197-203.

Martha, S.K. and Hariprakash, B. and Gaffoorb, S.A. and Ambalavanan, S. and Shukla, A.K. (2005) Assembly and performance of hybrid-VRLA cells and batteries. Journal of Power Sources, 144 (2). pp. 560-567.

Martha, S.K. and Hariprakash, B. and Gaffoor, S.A. and Ambalavanan, S. and Shukla, A.K. (2005) Assembly and performance of hybrid-VRLA cells and batteries. Journal of Power Sources, 144 (2). pp. 560-567.

Ting-Kuo, G. and Lua, C.Z. and Huang, J.D. and Premkumar, T. and Chang, Y.U. (2005) Nanoparticulate coatings for enhanced cyclability of LiCoO2 cathodes. Journal of Power Sources, 146. pp. 65-70.

Fey, G.T. and Chen, J.G. and Premkumar, T. (2005) Carboxylate-alumoxanes as precursors for alumina coatings to enhance the cyclability of LiCoO2. Journal of Power Sources, 146. pp. 250-253.

Fey, G.T. and Wang, Z.F. and Lu, C.Z. and Premkumar, T. (2005) MgAl2O4 spinel-coated LiCoO2 as long-cycling cathode materials. Journal of Power Sources, 146. pp. 245-249.

Thirunakaran, R. and Vasudevan, S. and Sivashanmugam, A. and Gopukumar, S. (2005) Electrochemical behaviour of mono-chloronitrobenzene as cathode material for magnesium reserve batteries. Journal of Power Sources, 148. pp. 112-115.

Manisankar, P. and Gomathi, A. and Velayutham, D. (2005) Oxygen reduction at the surface of glassy carbon electrodes modified with anthraquinone derivatives and dyes. Journal of Solid State Electrochemistry, 9 (9). pp. 601-608.

Sheela, B. and Usha, S. and Ramalechume, C. and Yegnaraman, V. (2005) Dioxygen reduction Æ Electrocatalytic reduction Æ Glassy carbon Æ Anthraquinone. Journal of Solid State Electrochemistry, 9 (9). pp. 595-600.

Augustin, C.O. and Kalaiselvan, R. and Nagaraj, R. and Berchmans, L.J. (2005) Effect of La3+ substitution on the structural, electrical and electrochemical properties of strontium ferrite by citrate combustion method. Materials Chemistry and Physics, 89 (2). pp. 406-411.

Kalyani, P. and Kalaiselvi, N. and Renganathan, N.G. (2005) LiNiMxV1−xO4 (M = Co, Mg and Al) solid solutions – prospective cathode materials for rechargeable lithium batteries. Materials Chemistry and Physics, 90 (1). pp. 196-202.

Kumar, M. and Anbukulandainathan, M. and Arulraj, I. and Chandrasekaran, R. and Pattabiraman, R. (2005) Electrical and sintering behaviour of Y2Zr2O7 (YZ) pyrochlore based materials: the influence of bismuth. Materials Chemistry and Physics, 92 (2). pp. 295-302.

Kumar, M. and Anbukulandainathan, M. and Arulraj, I. and Chandrasekaran, R. and Pattabiraman, R. (2005) Electrical and sintering behaviour of Y2Zr2O7 (YZ) pyrochlore-based materials—the influence of bismuth. Materials Chemistry and Physics, 92 (2). pp. 303-309.

Murali, K.R. and Srinivasan, K. and Trivedi, D.C. (2005) Vacuum evaporated CdSe thin films and their characteristics. Materials Letters, 59 (1). pp. 15-18.

Murali, K.R. and Austine, A. and Trivedi, D.C. (2005) Properties of ZnSe films brush plated on high temperature substrates. Materials Letters, 59 (21). pp. 2621-2624.

Natesan, M. and Selvaraj, M. and Maruthan, K. and Rajendran, P. (2005) Using organic coatings to protect mild steel in a viscose industrial atmosphere. Materials Performance, 44 (12). pp. 30-34.

Marydelphine, S. and Jayachandran, M. and Sanjeeviraja, C. (2005) Pulsed electrodeposition and characterization of molybdenum diselenide thin film. Materials Research Bulletin, 40 (1). pp. 135-147.

Thirunakaran, R. and Kimb, K.T. and Kang, Y.M. and Lee, J.Y. (2005) Cr3+ modified LiMn2O4 spinel intercalation cathodes through oxalic acid assisted sol–gel method for lithium rechargeable batteries. Materials Research Bulletin, 40 (1). pp. 177-186.

Zou, M. and Yoshio, M. and Gopukumar, S. and Yamaki, J.I. (2005) Performance characteristics of Li//Li1�XCoO2 cells. Materials Research Bulletin, 40 (4). pp. 708-714.

Balaji, S. and Kalaiselvan, R. and Berchmans, L.J. and Angappan, S. and Subramanian, K. and Augustin, C.O. (2005) Combustion synthesis and characterization of Sn4+ substituted nanocrystalline NiFe2O4. Materials Science and Engineering, 119 (2). pp. 119-124.

Ramamoorthy, K. and Sanjeeviraja, C. and Jayachandran, M. and Sankaranarayanan, K. and Ganesan, K. and Pankaj Misra, V. and Kukreja, L.M. (2005) A novel nano-architecture for ZnO thin films on h100i Si, GaAs and InP single crystal wafers by L-MBE as value in nano-robotic (machining) device fabrication efforts. Materials Science in Semiconductor Processing, 8 (4). pp. 555-563.

Srinivasakannan, C. and Balasubramanian, N. (2005) Effect of Different Cooling Modes on Crystal Size Distribution in a Batch Cooling Crystallizer for DL-Malic Acid. Particulate Science and Technology, 23 (2). pp. 159-167.

Augustin, C.O. and Hema, K. and Berchmans, L.J. and Kalaiselvan, R. and Saraswathi, R. (2005) Effect of Ce4+ substitution on the structural, electrical and dielectric properties of NiAl2O4 spinel. Physica Status Solidi A, 202 (6). pp. 1017-1024.

Pandiyan, D.P. and Marikani, A. and Murali, K.R. (2005) Optical properties of vacuum evaporated CdxSn1�xSe polycrystalline thin films: influence of composition and thickness. Physica B, 357 (3-4). pp. 485-493.

John, S. and Srinivasan, K.N. and Kavimani, P.M. and Harikrishnan, K. and Praveen, J. and Ganesan, M. (2005) Electroless Ni-P-Ti0,-Based Com~osite coatings for surface finishing applications. Plating and Surface Finishing. pp. 62-66.

Sekar, R. and Sobha , J. (2005) Electrodeposition of Zinc from acetate baths. Plating and Surface Finishing, 92 (3). pp. 58-68.

Kalaiselvi, N. and Thirunakaran, R. and Periasamy, P. and Sakthivel, M. and Muniyandi, N. (2005) LiMgy1Cry2Mn2-y1-y2O4 (0.0 < 0.30; Y2=0.30-Y1) as a cathode active material for lithium batteries. Portugaliae Electrochimica Acta, 23 (2). pp. 247-262.

Anbukulandainathan, M. and Kulanjiappar, K. and Raju, T. and Muthukumaran, A. (2005) Cyclic voltammetry and RRDE studies on the electrochemical behaviour of azetidinone ester. Portugaliae Electrochimica Acta, 23 (3). pp. 355-365.

Raju, T. and Basha, C.A. (2005) Process optimization studies on mediated electrooxidation. Portugaliae Electrochimica Acta, 23 (3).

Raghu, S. and Sheela, B. and Phani, K.L.N. and Yegnaraman, V. (2005) Nanoparticulate platinum films on gold using dendrimer-based wet chemical method. Pramana-Journal of Physics, 65 (5). pp. 821-830. ISSN 0304-4289

Sathiyanarayanan, S. and Muthukrishnan, S. and Venkatachari, G. and Trivedi, D.C. (2005) Corrosion protection of steel by polyaniline (PANI) pigmented paint coating. Progress in Organic Coatings, 53 (4). pp. 297-301.

Selvaraj, M. and Palraj, S. and Jayakrishnan, P. (2005) Performance of polymer blends on phosphated steel substrate. Progress in Organic Coatings, 54 (1). pp. 1-4. ISSN 0021-8995

Palraj, S. and Selvaraj, M. and Jayakrishnan, P. (2005) Effect of phosphate coatings on the performance of epoxy polyamide red oxide primer on galvanized steel. Progress in Organic Coatings, 54 (1). pp. 5-9.

Vasudevan, D. (2005) Direct and Indirect Electrochemical Reduction of Organic Halides in Aprotic Media. Russian Journal of Electrochemistry, 41 (3). pp. 310-314.

Sivakumar, S. and Basha, C.A. (2005) Evaluation of the Current Function in Linear Sweep Voltammetry by Pade Approximation and Epsilon Convergence. Russian Journal of Electrochemistry, 41 (4). pp. 421-438.

Kalyani, P. and Kalaiselvi, N. (2005) Various aspects of LiNiO2 chemistry: A review. Science and Technology of Advanced Materials, 6 (6). pp. 689-703.

Sivakumar, R. and Vijayan, V. and Ganesan, V. and Jayachandran, M. and Sanjeeviraja, C. (2005) Electron beam evaporated molybdenum oxide films: A study of elemental and surface morphological properties. Smart Materials and Structures (6). pp. 1204-1209.

Fey, G.T. and Lin, Y.Y. and Premkumar, T. (2005) Enhanced cyclability and thermal stability of LiCoO2 coated with cobalt oxides. Surface & Coatings Technology, 191 (1). pp. 68-75.

Feb, G.T. and Lu, C.Z. and Premkumar, T. and Chang, Y.C. (2005) TiO2 coating for long-cycling LiCoO2: A comparison of coating procedures. Surface & Coatings Technology, 199 (1). pp. 22-31. ISSN 0257-8972

Subramanian, B. and Jayakumar, S. and Jayachandran, M. and Sobha , J. (2005) Studies on nickel electrodeposits on dc magnetron sputtered copper substrates. Surface Engineering, 21 (2). pp. 151-155. ISSN 0267-0844

Srinivasan, K.N. and John, S. (2005) Studies on electroless nickel–PTFE composite coatings. Surface Engineering, 21 (2). pp. 156-160. ISSN 0267-0844

Geetha, S. and Trivedi, D.C. (2005) Electrochemical synthesis and characterization of conducting polyparaphenylene using room-temperature melt as the electrolyte. Synthetic Metals, 148 (2). pp. 187-194.

Geetha, S. and Trivedi, D.C. (2005) A new route to synthesize high degree polythiophene in a room temperature melt medium. Synthetic Metals, 155 (1). pp. 232-239.

Geetha, S. and Trivedi, D.C. (2005) Electrochemical synthesis and characterization of conducting polymers using room temperature melt as an electrolyte. Synthetic Metals, 155 (2). pp. 306-310.

Chepurirao, R.K. and Trivedi, D.C. (2005) Synthesis and characterization of fatty acids passivated silver nanoparticles—their interaction with PPy. Synthetic Metals, 155 (2). pp. 324-327.

Raju, T. and Kulangiappar, K. and Anbukulandainathan, M. and Muthukumaran, A. (2005) A simple and regioselective a-bromination of alkyl aromatic compounds by two-phase electrolysis. Tetrahedron Letters, 46 (41). pp. 7047-7050.

Vijasekaran, B. and Basha, C.A. (2005) Modeling in Electrochemical Engineering – A critical review. Trasnactions of the SAEST, 40 (1). pp. 1-13.

Muralidharan, S. and Saraswathy, V. and Parande, A.K. and Srinivasan, S. and Palaniswamy, N. (2005) Studies on the Corrosion Performance for Steel Embedded in Fly Ash Blended Concrete. Transactions of the SAEST, 40 (1). pp. 14-18.

Jeyaraj, T. and Raja, C. and Paramasivam, M. and Jayapriya, B. (2005) Inhibition of Corrosion of Mild Steel in 10 % Sulfamic Acid by Azo Dyes. Transactions of the SAEST, 40 (1). pp. 19-23.

Rajendran, S. and Amalraj, S.J. and Sahayaraj, W. and Rathish, R.J. and Anthony, N. and Palaniswamy, N. (2005) Mutual Influence of HEDP and SDS - Zn2+ System on Corrosion Inhibition of Carbon Steel. Transactions of the SAEST, 40 (1). pp. 35-39.

Jayachandran, M. and Vijayalakshmi, R. and Visalakshi, R. and Sanjeeviraja, C. (2005) Review on WO, Thin Films:Materials Properties, Preparation Techniques and Electrochromic Devices. Transactions of the SAEST, 40 (2). pp. 42-61.

Mani, N. and Sangeetha, B. (2005) Dependence of Lead Acid Battery Performance on Electrolyte Stratification and Electrolyte Agitation. Transactions of the SAEST, 40 (4). pp. 110-112.

Jeyaraj, T. and Paramasivam, M. and Raja, C. and Jayaprakash, S. and Mariarajan, R. (2005) Effect of Arginine in Conjunction with Calcium Oxide on the Corrosion of Aluminium in 1.0 N Sodium Hydroxide. Transactions of the SAEST, 40 (4). pp. 113-117.

Jeyaraj, T. and Paramasivam, M. and Raja, C. and Thangappan, V. and Stellashalini, A.S. (2005) 2',3-Dicarboxylato-4-Hydroxyazobenzene as Corrosion Inhibitor for Aluminium in Sodium Hydroxide. Transactions of the SAEST, 40 (4). pp. 139-145.

Mohan, S. and Raj, V. (2005) A comparative study of DC and pulse gold electrodeposits. Transactions of the Institute of Metal Finishing, 83 (2). pp. 72-76. ISSN 0020-2967

Sheela, G. and Malathy, P. and Pushpavanam, S. (2005) A bromide electrolyte for the electrodeposition of platinum and platinum–iridium alloy. Transactions of the Institute of Metal Finishing, 83 (2). pp. 77-81. ISSN 0020-2967

Selar, R. and Krishnan, R.M. and Muralidharan, V.S. and Sobha, J. (2005) Characteristics of acetate based zinc bath and deposits. Transactions of the Institute of Metal Finishing, 83 (2). pp. 104-108.

Kalpana, D. and Ananth, M.V. (2005) Electrocatalytic properties of electrodeposited Ni–Mn–S system in alkaline electrolytes. Transactions of the Institute of Metal Finishing, 83 (3). pp. 137-149.

Marikannu, C. and Sathiyanarayanan, S. and Venkatachari, G. (2005) Studies on newer chemical passivation treatment for stainless steel. Transactions of the Institute of Metal Finishing, 83 (3). pp. 158-160. ISSN 0020-2967

Mohan, S. and Raj, V. (2005) The effect of additives on the pulsed electrodeposition of copper. Transactions of the Institute of Metal Finishing, 83 (4). pp. 194-198. ISSN 0020-2967

Sekar, R. and Sobha , J. and Muralidharan, V.S. (2005) Electrochemical behaviour of zinc acetate complexes: a cyclic voltammetry study. Transactions of the Institute of the Metal Finishing, 83 (6). pp. 300-302.

Hebalkar, N. and Arabale, G. and Sainkar, S.R and Pradhan, S.D. and Mulla, I.S. and Vijayamohanan, K.Pillai and Ayyub, P. and Kulkarni, S.K. (2005) Study of correlation of structural and surface properties with electrochemical behaviour in carbon aerogels. Journal of Materials Science, 40. pp. 3777-3782. ISSN 0022-2461

Hebalkar, N. and Arabale, G. and Sainkar, S.R. and Pradhan, S.D. and Mulla, I.S. and Vijayamohanan, K.Pillai and Ayyub, P. and Kulkarni, S.K. (2005) Study of correlation of structural and surface properties with electrochemical behaviour in carbon aerogels. Journal of Materials Science. pp. 3777-3782. ISSN 0022-2461

Ramesh, S. and Rajeswari, S. and Maruthamuthu, S. (2004) Corrosion inhibition of copper by new triazole phosphonate derivatives. Applied Surface Science, 229 (7). pp. 214-225. ISSN 0169-4332

Mohanan, S. and Maruthamuthu, S. and Venkatachari, G. and Palaniswamy, N. and Raghavan, M. (2004) Corrosion inhibition by freshwater biofilm on 316 stainless steel. Bulletin of Electrochemistry , 20 (3). pp. 129-132. ISSN 0256-1654

Parvathi, N. and Sulochana, N. and Muralidharan, V.S. (2004) Cyclic voltammetric reduction of 7-hydroxy and acetoxy flavones at glassy carbon electrode. Bulletin of Electrochemistry , 20 (2). pp. 93-96. ISSN 0256-1654

Subramania, A. and Kalyanasundaram, N.T. and Sathiyapriya, R. and Muralidharan, V.S. and Vasudevan, T. (2004) Polymeric corrosion inhibitors - an overview. Bulletin of Electrochemistry , 20 (2). pp. 49-58. ISSN 0256-1654

Vijayasekaran, B. and Basha, C.A. (2004) Expert system tool box for corrosion problems. Bulletin of Electrochemistry , 20 (3). pp. 133-138. ISSN 0256-1654

Visalakshi, R. and Sobha , J. and Sridevi, R. and Rajakumari, R. and Muralidharan, V.S. (2004) Characterization of Zinc-Iron alloy electrodeposits for corrosion resistance. Bulletin of Electrochemistry , 20 (3). pp. 115-118. ISSN 0256-1654

Vijayasekaran, B. and Basha, C.A. and Balasubramanian, N. (2004) Optimization of electrochemical reactors using genetic algorithms. Chemical and Biochemical Engineering Quarterly, 18 (4). pp. 337-344. ISSN 0352-9568

Dhanaraj, J. and Geethalakshmi, M. and Jagannathan, R. and Kutty, T.R.N. (2004) Eu3+ dopped yttrium oxysulfide nanocrystals – crystallite size and luminescence transition(s). Chemical Physics Letters, 387 (1). pp. 23-28. ISSN 0009-2614

Sathiyanarayanan, S. and Muralidharan, S. and Venkatachari, G. and Raghavan, M. (2004) Corrosion protection by electropolymerised and polymer pigmented coatings - a review. Corrosion Reviews, 22 (2). pp. 157-166. ISSN 0334-6005

Selvaraj, S.K. and Johnkennedy, A. and Johnamalraj, A. and Rajendran, S. and Palaniswamy, N. (2004) corrosion behaviuor of carbon steel in the presence of polyvinylpyrrolidone. Corrosion Reviews, 22 (3). pp. 219-232. ISSN 0334-6005

Thangavel , K. (2004) The threshold limit for chloride corrosion of reinforced concrete. Corrosion Reviews , 22 (1). pp. 55-70. ISSN 0334-6005

Ramamoorthy, K. and Jayachandran, M. and Sankaranarayanan, K. and Misra, P. and Kukreja, L.M. and Sanjeeviraja, C. (2004) Development of a novel high speed (electron-mobility) epi-n-ZnO thin films by L-MBE for III–V opto-electronic devices. Current Applied Physics, 4 (6). pp. 679-684. ISSN 1567-1739

Maruthamuthu, S. and Eashwar, M. and Iyer, S.V.K. (2004) A possible role for phototrophic sulphur bacteria in the promotion of anaerobic metal corrosion. Current Science, 86 (5). pp. 639-641. ISSN 0011-3891

Shukla, A.K. and Suresh, P. and Sheela, B. and Rajendran, A. (2004) Biological fuel cells and their applications. Current Science, 87 (4). pp. 455-468. ISSN 0011-3891

Hariprakash, B. and Mane, A.U. and Martha, S.K. and Gaffoor, S.A. and Shivashankar, S.A. and Shukla, A.K. (2004) A Low-Cost, High Energy-Density Lead/Acid Battery. Electrochemical and Solid-State Letters, 7. A66-A69. ISSN 1099-0062

Raman, R.K. and Choudhury, N.A. and Shukla, A.K. (2004) A High Output Voltage Direct Borohydride Fuel Cell. Electrochemical and Solid-State Letters, 7. A488-A491. ISSN 1099-0062

Zou, M. and Yoshio, M. and Gopukumar, S. and Yamaki, J.I. (2004) Synthesis and Electrochemical Performance of High Voltage Cycling LiM0.05Co0.95O2 as Cathode Material for Lithium Rechargeable Cells. Electrochemical and Solid-State Letters, 7. A176-A179. ISSN 1099-0062

Doh, C.H. and Kalaiselvi, N. and Park, C.W. and Jin, B.S. and Moon, S.I. and Yun, M.S. (2004) Synthesis and electrochemical characterization of novel high capacity Si3xFexN4 anode for rechargeable lithium batteries. Electrochemistry Communications, 6 (10). pp. 965-968. ISSN 1388-2481