Jump to: Article Number of items: 138. ArticleAnanth, M.V. and Manimaran, K. and Arulraj, I. and Sureka, N. (2007) Influence of air electrode electrocatalysts on performance of air-MH cells. International Journal of Hydrogen Energy, 32. 4267 -4271. Ananth, M.V. and Raju, M. and Manimaran, K. and Balachandran, G. and Nair, L.M. (2007) Influence of rare earth content on Mm-based AB5 metal hydride alloys for Ni-MH batteries—An X-ray fluorescence study. Journal of Power Sources, 167. pp. 228-233. ISSN 0378-7753 Anbukulandainathan, M. and Hall, C. and Wolverson, D. and Foord, J.S. and MacDonald, S.M. and Marken, F. (2007) Boron-doped diamond electrodes in organic media: Electrochemical activation and selectivity effects. Journal of Electroanalytical Chemistry, 606. pp. 150-158. ISSN 1572-6657 Anbukulandainathan, M. and Muthukumaran, A. and Patil, K. and Chavan, R.B. (2007) Potentiostatic studies on indirect electrochemical reduction of vat dyes. Dyes and Pigments, 73. pp. 47-54. Anbukulandainathan, M. and Patil, K. and Muthukumaran, A. and Chavan, R.B. (2007) Review of the process development aspects of electrochemical dyeing: its impact and commercial applications. Process development aspects of electrochemical dyeing, 123. pp. 143-151. Aravindan, V. and Vickraman, P. and Premkumar, T. (2007) ZrO2 nanofiller incorporated PVC/PVdF blend-based composite polymer electrolytes (CPE) complexed with LiBOB. Journal of Membrane Science, 305. pp. 146-151. Arun, S. and Subramanian, P. (2007) Cytochrome P450-dependent monooxygenase system mediated hydrocarbon metabolism and antioxidant enzyme responses in prawn, Macrobrachium malcolmsonii. Comparative Biochemistry and Physiology. Babu, B.R. and Parande, A.K. and Basha, C.A. (2007) Electrical and electronic waste: A global environmental problem. Waste Management & Research, 25. pp. 307-318. Balasubramanian, N. and Srinivasakannan, C. and Basha, C.A. (2007) Drying Kinetics in the Riser of Circulating Fluidized Bed with Internals. Drying Technology, 25. pp. 1595-1599. ISSN 0737-3937 Basha, C.A. (2007) Role of short range interactions in the charge of maximum adsorption. Journal of Theoretical and Computational Chemistry, 6 (4). pp. 715-729. Bhadrinarayana, N.S. and Basha, C.A. and Anantharaman, N. (2007) Electrochemical Oxidation of Cyanide and Simultaneous Cathodic Removal of Cadmium Present in the Plating Rinse Water. Industrial and Engineering Chemistry Research, 46. pp. 6417-6424. ISSN 0888-5885 Dhoke, S.K. and Palraj, S. and Maruthan, K. and Selvaraj, M. (2007) Preparation and characterization of heat-resistant interpenetrating polymer network (IPN). Progress in Organic Coatings, 51. pp. 21-27. Emmanuel, B. (2007) Computation of ac responses of arbitrary electrode geometries from the corresponding secondary current distributions: A method based on analytic continuation. Journal of Electroanalytical Chemistry, 605. pp. 89-97. ISSN 1572-6657 Ganesan, K. and Rajagopal, K. (2007) Evaluation of bagasse ash as corrosion resisting admixture for carbon steel in concrete. Anti-Corrosion Methods and Materials , 54 (4). pp. 230-236. ISSN 0003-5599 Ganesan, K. and Rajagopal, K. and Thangavel, K. (2007) Chloride resisting concrete containing rice husk ash and bagasse ash. Indian Journal of Materials & Sciences, 14. pp. 257-265. Ganesan, K. and Rajagopal, K. and Thangavel, K. (2007) Evaluation of bagasse ash as supplementary cementitious material. Cement & Concrete Composites, 29. pp. 515-524. ISSN 0958-9465 Ganesan, M. (2007) A new promising high temperature lithium battery solid electrolyte. Electrochemistry Communications, 9. pp. 1980-1984. Ganesan, M. and Dhananjeyan, M.V.T. and Sarangapani, K.B. and Renganathan, N.G. (2007) Solid state rapid quenching method to synthesize micron size Li4Ti5O12. Journal of Electroceramics, 18. pp. 329-337. Ghanem, M.A. and Compton, R.G. and Coles, B.A. and Psillakis, E. and Anbukulandainathan, M. and Marken, F. (2007) Microwave activation of electrochemical processes: High temperature phenol and triclosan electro-oxidation at carbon and diamond electrodes. Electrochimica Acta, 53. pp. 1092-1099. ISSN 0013-4686 Ha, T.H. and Muralidharan, S. and Bae, J.H. and Ha, Y.C. and Lee, H.G. and Park, K.W. and Kim, D.K. (2007) Accelerated short-term techniques to evaluate the corrosion performance of steel in fly ash blended concrete. Building and Environment, 42. pp. 78-85. Hairunnisha, S. and Sendil, G.K. and Prabhakarrethinaraj, J. and Srinivasan, G.N. and Adaikkalam, P. and Kulandaisamy, S. (2007) Studies on the preparation of pure ammonium para tungstate from tungsten alloy scrap. Hydrometallurgy, 85. pp. 65-71. Jayaprakash, N. and Kalaiselvi, N. (2007) On the electrochemical behavior of LiMXFe1XPO4 [M = Cu, Sn; X = 0.02] anodes – An approach to enhance the anode performance of LiFePO4 material. Electrochemistry Communications, 9. pp. 620-628. Jayaprakash, N. and Kalaiselvi, N. and Doh, C.H. (2007) Synthesis and electrochemical evaluation of carbon coated Cu6Sn5 alloy-graphite composite lithium battery anodes. Journal of Applied Electrochemistry, 37. pp. 567-573. ISSN 0021-891X Jayaprakash, N. and Kalaiselvi, N. and Doh, C.H. (2007) A new class of tailor-made Fe0.92Mn0.08Si2 lithium battery anodes: Effect of composite and carbon coated Fe0.92Mn0.08Si2 anodes. Intermetallics, 15. pp. 442-450. ISSN 0966-9795 Jayaprakash, N. and Sathiyanarayanan, K. and Kalaiselvi, N. (2007) A novel approach to explore Zn based anodes for lithium-ion battery applications. Electrochimica Acta, 52. pp. 2453-2460. ISSN 0013-4686 Kalaiselvi, N. (2007) Synthesis and Electrochemical Characterization of Novel Category Si3-xMxN4 (M= Co, Ni, Fe) Anodes for Rechargeable Lithium Batteries. International Journal of Electrochemical Science, 2. 478 -487. ISSN 1452-3981 Kalaiselvi, N. and Doh, C.H. and Moon, I.S. (2007) An Insight in to the Synthesis and Anode Performance Behavior of LiNiVO4 Compounds. Journal of New Materials for Electrochemical Systems, 10. pp. 153-159. ISSN 1480-2422 Kalaiselvi, N. and Doh, C.H. and Srikeerthi, P. (2007) Synthesis and Characterization of Newly Identified Si3-xMxN4 (M= Co, Fe) Anodes for Lithium Batteries. Journal of New Materials for Electrochemical Systems, 10. pp. 209-212. ISSN 1480-2422 Kiruthiga, P.V. and Beemashafreen, R. and Karuthapandian, S. and Arun, S. and Govindu, S. and Pandima Devi, K. (2007) Protective effect of silymarin on erythrocyte haemolysate against benzo(a)pyrene and exogenous reactive oxygen species (H2O2) induced oxidative stress. Chemosphere, 68. pp. 1511-1518. Krishnan, V. and Kalaiselvan, R. and Augustin, C.O. and Gedanken, A. and Bertagnolli, H. (2007) EXAFS and XANES Investigations of CuFe2O4 Nanoparticles and CuFe2O4-MO2 (M ) Sn,Ce) Nanocomposites. Journal of Physical Chemistry B, 111. pp. 16724-16733. ISSN 1520-6106 Malathy, P. and Manikandan, H. and Ramanathan, K. (2007) Preparation and characterization of nickel–cobalt-diamond electro-composites by sediment co-deposition. Surface & Coatings Technology, 201. pp. 6372-6379. ISSN 0257-8972 Manivel, A. and Ilayaraja, N. and Velayutham, D. and Noel, M. (2007) Medium effects on the electro-deposition of MnO2 on glassy carbon electrode: A comparative study in alkane, perfluoro alkane carboxylic acids and methanesulphonic acid. Electrochimica Acta, 52. pp. 7841-7848. ISSN 0013-4686 Manivel, P. and Sathiyanarayanan, S. and Venkatachari, G. (2007) Influence of H1 and Cl2 Ions on Inhibitive Performance of Poly(aniline) for Iron Corrosion in Acid. Journal of Applied Polymer Science, 106. pp. 3988-3993. Mathiyarasu, J. and Phani, K.L.N. (2007) Carbon-Supported Palladium-Cobalt-Noble Metal (Au, Ag, Pt) Nanocatalysts as Methanol Tolerant Oxygen-Reduction Cathode Materials in DMFCs. Journal of the Electrochemical Society, 154 (11). B1100-B1105. ISSN 0013-4651 Mathiyarasu, J. and Senthilkumar, S. and Phani, K.L.N. and Yegnaraman, V. (2007) PEDOT-Au Nanocomposite Films for Electrochemical Sensing of Dopamine andUric Acid. Journal of Nanoscience and Nanotechnology, 7 (7). pp. 1-5. Mohan, N. and Balasubramanian, N. and Basha, C.A. (2007) Electrochemical oxidation of textile wastewater and its reuse. Journal of Hazardous Materials, 147. pp. 644-657. ISSN 0304-3894 Mohan , S. and Subramanian, P. and Vasudevan, S. (2007) Studies on the Electrochemical Preparation of Sb2O3. Industrial and Engineering Chemistry Research, 46. pp. 7870-7874. ISSN 0888-5885 Mohanan, S. and Maruthamuthu, S. and Muthukumar, N. and Rajesekar, A. and Palaniswamy, N. (2007) Biodegradation of palmarosa oil (green oil) by Serratia marcescens. International Journal of Environmental Science & Technology, 4 (2). pp. 279-283. Murali, K.R. (2007) Properties of GaAs films deposited by pulse periodic technique. Journal of Materials Science: Materials in Electronics, 42. pp. 1321-1324. ISSN 0957-4522 Murali, K.R. (2007) Properties of sol–gel dip-coated zinc oxide thin films. Journal of Physics and Chemistry of Solids, 68. pp. 2293-2296. Murali, K.R. and Jayasuthaa, B. (2007) Properties of CdTe films brush plated on high temperature substrates. Materials Science in Semiconductor Processing, 10. pp. 36-40. Murali, K.R. and Kumaresan, S. and Josephprince, J. (2007) Brush electrodeposited CdS films on low temperature substrates. Materials Letters, 61. pp. 2613-2615. ISSN 0167-577X Murali, K.R. and Kumaresan, S. and Josephprince, J. (2007) Characteristics of CdS films brush electrodeposited on low-temperature substrates. Materials Science in Semiconductor Processing, 10. pp. 56-60. Murali, K.R. and Kumaresan, S. and Josephprince, J. (2007) Properties of brush plated CdS films. Journal of Materials Science: Materials in Electronics, 18. pp. 487-493. ISSN 0957-4522 Muralidharan, S. and Ha, T.H. and Bae, J.H. and Ha, Y.C. and Lee, H.G. and Kim, D.K. (2007) A promising potential embeddable sensor for corrosion monitoring application in concrete structures. Measurement, 40. pp. 600-606. Muralidharan, S. and Kim, D.K. and Ha, T.H. and Bae, J.H. and Ha, Y.C. and Lee, H.G. and Scantlebury, J.D. (2007) Influence of alternating, direct and superimposed alternating and direct current on the corrosion of mild steel in marine environments. Desalination, 216. pp. 103-115. Muralidharan, V.S. (2007) Electro catalytic amorphous nickel alloy. Indian Journal of Chemical Technology, 14. pp. 161-165. Muthukumar, N. and Ilangovan, A. and Maruthamuthu, S. and Palaniswamy, N. (2007) Surface analysis of inhibitor films formed by 1-aminoanthraquinones on API 5L-X60 steel in diesel–water mixtures. Electrochimica Acta, 52. pp. 7183-7192. ISSN 0013-4686 Muthukumar, N. and Maruthamuthu, S. and Ilangovan, A. and Palaniswamy, N. (2007) Impact of micelles on the biocidal efficiency in a diesel–water interface. Surface and interface analysis, 39. pp. 533-541. Muthukumar, N. and Maruthamuthu, S. and Mohanan, S. and Palaniswamy, N. (2007) Influence of an oil soluble inhibitor on microbiologically influenced corrosion in a diesel transporting pipeline. Biofouling, 23 (6). 395 -404. ISSN 0892-7014 Muthukumar, N. and Maruthamuthu, S. and Palaniswamy, N. (2007) Role of cationic and nonionic surfactants on biocidal efficiency in diesel-water interface. Colloids and Surfaces B: Biointerfaces, 57. pp. 152-160. Nakkiran, A. and Thirumalai, J. and Jagannathan, R. (2007) Luminescence blinking in Eu3+ doped yttrium oxysulfide (Y2O2S:Eu3+) quantum-dot ensembles: Photo-assisted relaxation of surface state(s). Chemical Physics Letters, 436. pp. 155-161. ISSN 0009-2614 Neelavannan, M.G. and Revathi, M. and Basha, C.A. (2007) Photocatalytic and electrochemical combined treatment of textile wash water. Journal of Hazardous Materials, 149. pp. 371-378. Nirmal, R.G. and Kavitha, A.L. and Sheela, B. and Yegnaraman, V. (2007) Electrochemical Investigations of 3-(3-Thienyl) Acrylic Acid Protected Nanoclusters and Planar Gold Surfaces. Journal of Nanoscience and Nanotechnology, 7 (7). pp. 1-9. Palraj, S. and Venkatachari, G. (2007) Corrosion behaviour of copper in mandapam seawater. Indian Journal of Chemical Tcchnology, 14. pp. 29-33. ISSN National Institute of Science Communication and Information Resources Panjali, N. and Ramakrishnan, K.R. (2007) Linear Polarisation Resistance meter for concrete corrosion studies. Journal of Instrumentation society of India , 37 (1). pp. 1-6. Park, Y.W. and Rameshbapu, G.N.K. and Lee, K.Y. (2007) Studies of tin coated brass contacts in fretting conditions under different normal loads and frequencies. Surface & Coatings Technology, 201. pp. 7939-7951. Pathak, S.S. and Yegnaraman, V. and Mathiyrasu, J. and Maji, M. and Khanna, A.S. (2007) Corrosion studies of organicdithiol/monothiol derived self assembled monolayer on copper substrate towards corrosion protection in 0.5 M NaCl. Indian Journal of Chemical Technology, 14. pp. 5-15. ISSN 0971-457X Pattanaik, S. and Huggins, F.E. and Huffman, G.P. and Linak, W.P. and Miller, C.A. (2007) XAFS Studies of Nickel and Sulfur Speciation in Residual Oil Fly-Ash Particulate Matters (ROFA PM). Environmental Science & Technology, 41 (4). pp. 1104-1110. ISSN 0013-936X Periasamy, P. and Kalaiselvi, N. and Kim, H.S. (2007) High Voltage and High Capacity Characteristics of LiNi1/3Co1/3Mn1/3O2 Cathode for Lithium Battery Applications. International Journal of Electrochemical Science, 2. 689 -699. ISSN 1452-3981 Pol, S.V. and pol, G.V. and Gedanken, A. and Spijksma, G.I. and Grinblat, J. and Kalaiselvan, R. and Kessler, V.G. and Seisenbaeva, G.A. and Gohil, S. (2007) Synthesis of Nanocrystalline Zirconium Titanate and its Dielectric Properties. Journal of Physical Chemistry B, 111 (6). pp. 2484-2489. ISSN 1520-6106 Prakash, A.S. and Shivakumara, C. and Hegde, M.S. (2007) Single step preparation of CeO2/CeAlO3/-Al2O3 by solution combustion method: Phase evolution, thermal stability and surface modification. Materials Science and Engineering, 139. pp. 55-61. Prasad, D. and Arun, S. and Murugesan, M. and Padmanaban, S. and Satyanarayanan, R.S. and Sheela, B. and Yegnaraman, V. (2007) Direct electron transfer with yeast cells and construction of a mediator less microbial fuel cell. Biosensors and Bioelectronics, 22. pp. 2604-2610. ISSN 0956-5663 Radhajeyalakshmi, S. and Senthilkumar, S. and Mathiyarasu, J. and Phani, K.L.N. and Yegnaraman, V. (2007) Simultaneous determination of ascorbic acid, dopamine and uric acid using PEDOT polymer modified electrodes. Indian Journal of Chemistry, 46. pp. 957-961. Raghu, S. and Basha, C.A. (2007) Chemical or electrochemical techniques, followed by ion exchange, for recycle of textile dye wastewater. Journal of Hazardous Materials, 149. pp. 324-330. ISSN 0304-3894 Raghu, S. and Basha, C.A. (2007) Electrochemical treatment of Procion Black 5B using cylindrical flow reactor—A pilot plant study. Journal of Hazardous Materials, 139. pp. 381-390. Raghu, S. and Nirmal, R.G. and Mathiyarasu, J. and Sheela, B. and Phani, K.L.N. and Yegnaraman, V. (2007) Platinum–Dendrimer Nanocomposite Films on Gold Surfaces for Electrocatalysis. Catal Lett, 119. pp. 40-49. Rahamathunissa, G. and Basha, C.A. and Rajendran, L. (2007) The theory of reaction-diffusion processes at cylindrical ultramicroelectrodes. Journal of Theoretical and Computational Chemistry, 6 (2). pp. 301-307. Nehru, L.C. and Raj, A.M.E. and Jayachandran, M. and Sanjeeviraja, C. (2007) Spray pyrolysis deposition and characterization of highly (100) oriented magnesium oxide thin films. Crystal Research and Technology, 42 (9). 867 -875. ISSN 0232-1300 Raja Kumar, P. and Kalpana, D. and Renganathan, N.G. and Pitchumani, S. (2007) Electrocopolymerization of poly(o-toludine-co-metanilic acid) on mild steel surfaces and their physico-electrochemical characterizations. Synthetic Metals, 157. pp. 899-904. Rajasekar, A. and Babu, T.G. and Maruthamuthu, S. and Karuthapandian, S.T. and Mohanan, S. and Palaniswamy, N. (2007) Biodegradation and corrosion behaviour of Serratia marcescens ACE2 isolated from an Indian diesel-transporting pipeline. World Journal of Microbiology and Biotechnology, 23. pp. 1065-1074. Rajasekar, A. and Babu, T.G. and Pandian, S.T.K. and Maruthamuthu, S. and Palaniswamy, N. and Rajendran, A. (2007) Role of Serratia marcescens ACE2 on diesel degradation and its influence on corrosion. Journal of Indian Microbiol Biotechnology, 34. pp. 589-598. Rajasekar, A. and Ganesh Babu, T. and Karuthapandian, S. and Maruthamuthu, S. and Palaniswamy, N. and Rajendran, A. (2007) Biodegradation and corrosion behavior of manganese oxidizer Bacillus cereus ACE4 in diesel transporting pipeline. Corrosion Science, 49. pp. 2694-2710. ISSN 0010-938X Rajasekar, A. and Maruthamuthu, S. and Palaniswamy, N. and Rajendran, A. (2007) Biodegradation of corrosion inhibitors and their influence on petroleum product pipeline. Microbiological Research, 162. pp. 355-368. Rajasekar, A. and Ponmariappan, S. and Maruthamuthu, S. and Palaniswamy, N. (2007) Bacterial Degradation and Corrosion of Naphtha in Transporting Pipeline. Current Microbiology, 55. pp. 374-381. Rajendran, L. and Rahamathunissa, G. and Basha, C.A. (2007) Theories of diffusion at a microring electrodes: A review. Journal of Theoretical and Computational Chemistry, 6 (4). pp. 699-713. Raju, M. and Manimaran, K. and Ananth, M.V. and Renganathan, N.G. (2007) An EIS study on the capacity fades in MmNi3.6Al0.4Mn0.3Co0.7 metal-hydride electrodes. International Journal of Hydrogen Energy , 32. 1721 -1727. ISSN 0360-3199 Raju, T. and Manivasagan, S. and Revathy, B. and Kulangiappar, K. and Muthukumaran, A. (2007) A mild and efficient method for the oxidation of benzylic alcohols by two-phase electrolysis. Tetrahedron Letters, 48. pp. 3681-3684. ISSN 0040-4039 Raman, R.K. and Shukla, A.K. (2007) A Direct Borohydride/Hydrogen Peroxide Fuel Cell with Reduced Alkali Crossover. Fuel Cells, 7 (3). pp. 225-231. ISSN 1615-6846 Rameshbabu, B. and Parande, A.K. and Raghu, S. and Premkumar, T. (2007) Textile technology. The Journal of Cotton Science, 11. pp. 141-153. Rao, C.R.K. and Trivedi, D.C. (2007) Tailoring the gold–polypyrrole nanostructures at water–toluene interphase. Synthetic Metals, 157. pp. 432-436. Ravindran, V. and Muralidharan, V.S. (2007) Cyclic voltammetric studies on zinc transition metal alloy electrodeposition. Institute of Metal Finishing, 85 (3). Remona, A.M. and Phani, K.L.N. (2007) Comment on “Synthesis of Ordered Intermetallic PtBi2 Nanoparticles for Methanol-Tolerant Catalyst in Oxygen Electroreduction”. Chemistry of Materials, 19. ISSN 0897-4756 Saez, V. and Garcia, J.G. and Anbukulandainathan, M. and Marken, F. (2007) Electro-deposition and stripping of catalytically active iron metal nanoparticles at boron-doped diamond electrodes. Electrochemistry Communications, 9. pp. 1127-1133. ISSN 1388-2481 Sahu, A.K. and Selvarani, G. and Pitchumani, S. and Sridhar, P. and Shukla, A.K. (2007) Ameliorating effect of silica addition in the anode-catalyst layer of the membrane electrode assemblies for polymer electrolyte fuel cells. Journal of Applied Electrochemistry, 37. pp. 913-919. ISSN 0021-891X Sahu, A.K. and Selvarani, G. and Pitchumani, S. and Sridhar, P. and Shukla, A.K. (2007) A Sol-Gel Modified Alternative Nafion-Silica Composite Membrane for Polymer Electrolyte Fuel Cells. Journal of the Electrochemical Society, 154 (2). B123-B132. ISSN 0013-4651 Samsonnesaraj, A. and AmIraj, I. and Pattabiraman, R. (2007) Synthesis and characterization of LaCo03 based cathode and its chemical compatibility with Ce02 based electrolytes for intermediate temperature solid oxide fuel cell (ITSOFC). Indian Journal of Chemical Technology, 14. pp. 154-160. ISSN 0971-457X Samsonnesaraj, A. and Kumar, M. and Arulraj, I. and Radhakrishna, I. and Pattabiraman, R. (2007) Investigations on Chemical Interactions between Alternate Cathodes and Lanthanum Gallate Electrolyte for Intermediate Temperature Solid Oxide Fuel Cell (ITSOFC). Journal of Iranian Chemical Society, 4 (1). pp. 89-106. Saraswathy, V. and Song, H.W. (2007) Corrosion performance of rice husk ash blended concrete. Construction and Building Materials, 21. pp. 1779-1784. Saraswathy, V. and Song, H.W. (2007) Improving the durability of concrete by using inhibitors. Building and Environment, 42. pp. 464-472. Saravanan, K. and Sathiyanarayanan, S. and Muralidharan, S. and Azim, S.S. and Venkatachari, G. (2007) Performance evaluation of polyaniline pigmented epoxy coating for corrosion protection of steel in concrete environment. Progress in Organic Coatings, 59. pp. 160-167. Saravanathamizhan, R. and Mohan, N. and Balasubramanian, N. and Ramamurthi, V. and Basha, C.A. (2007) Evaluation of Electro-Oxidation of Textile Effluent Using Response Surface Methods. Clean, 35 (4). 355 -361. Sathiyanarayanan, S. and Azim, S.S. and Venkatachari, G. (2007) Corrosion protection of magnesium ZM 21 alloy with polyaniline–TiO2 composite containing coatings. Progress in Organic Coatings, 59. pp. 291-296. Sathiyanarayanan, S. and Azim, S.S. and Venkatachari, G. (2007) Preparation of polyaniline–Fe2O3 composite and its anticorrosion performance. Synthetic Metals, 157. pp. 751-757. Sathiyanarayanan, S. and Azim, S.S. and Venkatachari, G. (2007) Preparation of polyaniline–TiO2 composite and its comparative corrosion protection performance with polyaniline. Synthetic Metals, 157. pp. 205-213. Sathiyanarayanan, S. and Azim, S.S. and Venkatachari, G. (2007) A new corrosion protection coating with polyaniline–TiO2 composite for steel. Electrochimica Acta, 52. pp. 2068-2074. ISSN 0013-4686 Sathiyanarayanan, S. and Muthukrishnan, S. and Venkatachari, G. (2007) Synthesis and Corrosion Protection Performance of Polydiphenylamine. Journal of Applied Polymer Science, 105. pp. 1707-1711. ISSN 0021-8995 Savarimuthu, E. and Lalithambika, K.C. and Mosesezhilraj, A. and Nehru, L.C. and Ramamurthy, A. and Thayumanavan, S. and Sanjeeviraja, C. and Jayachandran, M. (2007) Synthesis and materials properties of transparent conducting In2O3 films prepared by sol–gel-spin coating technique. Journal of Physics and Chemistry of Solids, 68. pp. 1380-1389. Sekar, A.S.S. and Saraswathy, V. and Parthiban, G.T. (2007) Cathodic Protection of Steel in Concrete Using Conductive Polymer Overlays. International Journal of Electrochemical Science, 2. 872 -882. ISSN 1452-3981 Sekar, R. and Selvi, T.C. and Eagammai, C. and Jayakrishnan, S. (2007) Chemical stripping of gold deposits from different substrates. Institute of Metal Finishing, 85 (3). Selvarani, G. and Sahu, A.K. and Choudhury, N.A. and Sridhar, P. and Pitchumani, S. and Shukla, A.K. (2007) A phenyl-sulfonic acid anchored carbon-supported platinum catalyst for polymer electrolyte fuel cell electrodes. Electrochimica Acta, 52. pp. 4871-4877. ISSN 0013-4686 Senthilkumar, S. and Joseph, J. and Phani, K.L.N. (2007) Novel Method for Deposition of Gold-Prussian Blue Nanocomposite Films Induced by Electrochemically Formed Gold Nanoparticles: Characterization and Application to Electrocatalysis. Chemistry of Materials, 19. pp. 4722-4730. ISSN 0897-4756 Senthilkumar, S. and Sivakumar, C. and Mathiyarasu, J. and Phani, K.L.N. (2007) Stabilized Gold Nanoparticles by Reduction Using 3,4-Ethylenedioxythiophene-polystyrenesulfonate in Aqueous Solutions: Nanocomposite Formation, Stability, and Application in Catalysis. Langmuir, 23. pp. 3401-3408. Shivakumara, C. and Bellakki, M.B. and Prakash, A.S. and Vasanthacharya, N.Y. (2007) Rapid Synthesis of Ferromagnetic La1�xNaxMnO3 (0.00rxr0.25) by the Solution Combustion Method. Journal of American Ceramics Society, 90 (12). pp. 3852-3858. Sivakumar, C. (2007) Finely dispersed Pt nanoparticles in conducting poly(o-anisidine)nanofibrillar matrix as electrocatalytic material. Electrochimica Acta, 52. pp. 4182-4190. ISSN 0013-4686 Sivakumar, R. and Gopalakrishnan, R. and Jayachandran, M. and Sanjeeviraja, C. (2007) Characterization on electron beam evaporated a-MoO3 thin films by the influence of substrate temperature. Current Applied Physics, 7. pp. 51-59. ISSN 1567-1739 Sivakumar, R. and Gopalakrishnan, R. and Jayachandran, M. and Sanjeeviraja, C. (2007) Preparation and characterization of electron beam evaporated WO3 thin films. Optical Materials, 29. pp. 679-687. Sivakumar, R. and Gopinath, C.S. and Jayachandran, M. and Sanjeeviraja, C. (2007) An electrochromic device (ECD) cell characterization on electron beam evaporated MoO3 films by intercalating/deintercalating the H+ ions. Current Applied Physics, 7. pp. 76-86. Sivakumar, R. and Sanjeeviraja, C. and Jayachandran, M. and Gopalakrishnan, R. and Sarangi, S.N. and Paramanik, D. and Som, T. (2007) MeV N+-ion irradiation effects on -MoO3 thin films. Journal Of Applied Physics, 101. ISSN 0021-8979 Sivakumar, V. and Kumar, S. and Ross, C.A. and Horn, Y.S. (2007) Magnetic and Structural Investigation of Electrochemically Lithiated Magnetite Nanoparticles. IEEE Transactions on magnetics, 43 (6). Song, H.W. and Saraswathy, V. (2007) Corrosion Monitoring of Reinforced Concrete Structures - A Review. International Journal of Electrochemical Science, 2. pp. 1-28. ISSN 1452-3981 Srinivasan, R. and Jayachandran, M. and Ramachandran, K. (2007) Photoacoustic studies on optical and thermal properties of p-type and n-type nanostructured porous silicon for (100) and (111) orientations. Crystal Research and Technology, 42 (3). 266 -274. ISSN 0232-1300 Sripriya, R. and Chandrasekaran, M. and Subramanian, K. and Asokan, K. and Noel, M. (2007) Electrochemical destruction of p-chlorophenol and p-nitrophenol – Influence of surfactants and anode materials. Chemosphere, 69. pp. 254-261. Sripriya, R. and Muthuraja, K. and Santhosh, G. and Chandrasekaran, M. and Noel, M. (2007) The effect of structure of oil phase, surfactant and co-surfactant on the physicochemical and electrochemical properties of bicontinuous microemulsion. Journal of Colloid and Interface Science, 314. pp. 712-717. Subramanian, A. and Saradha, T. and Muzhumathi, S. (2007) Synthesis of nano-crystalline (Ba0.5Sr0.5)Co0.8Fe0.2O3−δ cathode material by a novel sol–gel thermolysis process for IT-SOFCs. Journal of Power Sources, 165. pp. 728-732. Subramanian, A. and Saradha, T. and Muzhumathi, S. (2007) Synthesis, sinterability and ionic conductivity of nanocrystalline Pr-doped La2Mo2O9 fast oxide-ion conductors. Journal of Power Sources, 167. pp. 319-324. Subramanian, A. and Sathiyapriya, A.R. and Muralidharan, V.S. (2007) Electrocatalytic cobalt–molybdenum alloy deposits. International Journal of Hydrogen Energy, 32. 2843 -2847. Subramanian, B. and Jayachandran, M. (2007) Characterization of reactive magnetron sputtered nanocrystalline titanium nitride (TiN) thin films with brush plated Ni interlayer. Journal of Applied Electrochemistry, 37. pp. 1069-1075. ISSN 0021-891X Subramanian, B. and Mohan, S. and Sobha , J. (2007) Selective area deposition of Tin–Nickel alloy coating – an alternative for decorative chromium plating. Journal of Applied Electrochemistry, 37. pp. 219-224. Subramanian, B. and Mohan, S. and Sobha , J. and Jayachandran, M. (2007) Structural and electrochemical characterization of Ni nanostructure films on steels with brush plating and sputter deposition. Current Applied Physics, 7. pp. 305-313. Subramanian, B. and Umamaheswari, G. and Jayachandran, M. (2007) Properties and corrosion behaviour of reactive magnetron sputtered TiAlN coatings on AISI 316L SS in simulated bodily fluid. Corrosion Engineering, Science and Technology, 42 (4). Subramanian, K. and Asokan, K. and Jeevarathinam, D. and Chandrasekaran, M. (2007) Electrochemical membrane reactor for the reduction of carbon dioxide to formate. Journal of Applied Electrochemistry, 37. pp. 255-260. ISSN 0021-891X Subramanian, M. and Dhanikaivelu, N. and Ramaprabha, R. (2007) Pulsed electrodeposition of cobalt and nickel alloy. Institute of Metal Finishing, 85 (5). Subramanian, V. and Luo, C. and Stephan, A.M. and Nahm, K.S. and Thomas, S. and Wei, B. (2007) Supercapacitors from Activated Carbon Derived from Banana Fibers. Journal of Physical Chemistry B, 111 (20). pp. 7527-7531. ISSN 1520-6106 Suresh, T. and Joseph, J. and Son, K.M. and Vittal, R. and Lee, J. and Kim, K.J. (2007) Effects of pH of a hybrid gel incorporated with 3-aminopropyltrimethoxysilane on the performance of a quasi-solid state dye-sensitized solar cell. Solar Energy Materials & Solar Cells, 91. pp. 1313-1318. Sureshbapu, R.H. and Panjali, N. and Lucy, P. and Nayak, N.U. (2007) Development of a multi-channel corrosion surveyor for non destructive testing of rcc structures. Journal of the Instrument Society of India, 37 (1). pp. 7-12. Suthan kissinger, N.J. and Jayachandran, M. and Perumal, K. and Sanjeeviraja, C. (2007) Structural and optical properties of electron beam evaporated CdSe thin films. Bulletin of Materials Science, 30 (6). pp. 547-551. ISSN 0250-4707 Tharamani, C.N. and Murulidharan, V.S. and Mayanna, S.M. (2007) Deposition and Dissolution of Cr-P Alloy: A Cyclic Voltammetric Approach. International Journal of Electrochemical Science, 2. 734 -746. ISSN 1452-3981 Thirumalai, J. and Jagannathan, R. and Trivedi, D.C. (2007) Y2O2S:Eu3+ nanocrystals, a strong quantum-confined luminescent system. Journal of Luminescence, 126. pp. 353-358. Thirumalai, P. and Ravi, R. and Kalaiselvi, N. (2007) Exploration of artificial neural network [ANN] to predict the electrochemical characteristics of lithium-ion cells. Electrochimica Acta, 53. pp. 1877-1882. ISSN 0013-4686 Vadivel, M. A. and Reddy, M.V. and Campet, G. and Vijayamohanan, K.Pillai (2007) Cyclic voltammetry, electrochemical impedance and ex situ X-ray diffraction studies of electrochemical insertion and deinsertion of lithium ion into nanostructured organic–inorganic poly(3,4-ethylenedioxythiophene) based hybrids. Journal of Electroanalytical Chemistry (603). pp. 287-296. ISSN 1572-6657 Vairamuthu, R. and Subramaniam, M. (2007) Effect of a-picoline and quinoline on dc and pulse plating of nickel directly on aluminium. Institute of Metal Finishing, 85 (3). Vasudevan, S. and Mohan , S. (2007) Studies on the Electrolytic Preparation of Ba(ClO4)2. Industrial and Engineering Chemistry Research, 46. pp. 6211-6216. ISSN 0888-5885 Vasudevan, S. and Sozhan, G. and Mohan-, S. and Balaji, R. and Malathy, P. and Pushpavanam, S. (2007) Electrochemical Regeneration of Chromium Containing Solution from Metal Finishing Industry. Industrial and Engineering Chemistry Research, 46 (9). pp. 2898-2901. ISSN 0888-5885 Vijayabhara, T. and Muzhumathi, S. and Noel, M. (2007) The use of hydrated nickel–cobalt mixed oxide electrodes for oxidation of aliphatic and aromatic alcohols. Journal of Applied Electrochemistry, 37. pp. 297-301. ISSN 0021-891X Vinodselvaganesh, S. and Mathiyarasu, J. and Phani, K.L.N. and Yegnaraman, V. (2007) Chemical Synthesis of PEDOT–Au Nanocomposite. Nanoscale Research Letters, 2. pp. 546-549. Vishnudevan, M. and Thangavel, K. (2007) A comparative study of inorganic versus organic corrosion inhibitors for mitigation of steel in chloride contaminated alkaline solution. Indian Joumal of Che:ll1ie:JI Te:e:hno!ogy, 14. pp. 22-28. Zahid, M. and Arulraj, I. and Tietz, F. and Stover, D. (2007) Chemical and physical properties of complex perovskites in the La0.8Sr0.2MnO3deLa0.8Sr0.2CuO2.4þdeLa0.8Sr0.2FeO3d system. Solid State Sciences, 9. pp. 706-712. |