Arun, S. and Rajendran, A. and Subramanian, P. (2006) Subcellular/tissue distribution and responses to oil exposure of the cytochrome P450-dependent monooxygenase system and glutathione S-transferase in freshwater prawns (Macrobrachium malcolmsonii, M. lamarrei lamarrei). Ecotoxicology , 15 (4). pp. 341-346. ISSN 0963-9292

Aurobind, S.V. and Amirthalingam, K.P. and Gomathi, H. (2006) Sol-gel based surface modification of electrodes for electro analysis. Advances in Colloid and Interface Science, 121 (1-3). pp. 1-7. ISSN 0001-8686

Azim, S.S. and Satheesh, A. and Ramu, K.K. and Ramu, S. and Venkatachari, G. (2006) Studies on graphite based conductive paint coatings. Progress in Organic Coatings, 55 (1). pp. 1-4. ISSN 0021-8995

Azim, S.S. and Sathiyanarayanan, S. and Venkatachari, G. (2006) Anticorrosive properties of PANI–ATMP polymer containing organic coating. Progress in Organic Coatings, 56 (2-3). pp. 154-158. ISSN 0021-8995

Balaji, R. and Pushpavanam, M. and Yogeshkumar, K. and Subramanian, K. (2006) Electrodeposition of Copper-Tin-Ptfe composite coatings. Indian Surface Finishing, 3 (3-4). pp. 381-391. ISSN 0972-9364

Balaji, R. and Pushpavanam, M. and Yogeshkumar, K. and Subramanian, K. (2006) Electrodeposition of bronze–PTFE composite coatings and study on their tribological characteristics. Surface & Coatings Technology, 201 (6). pp. 3205-3211. ISSN 0257-8972

Balakrishnan, P.G. and Ramesh, R. and Premkumar, T. (2006) Safety mechanisms in lithium-ion batteries. Journal of Power Sources, 155 (2). pp. 401-414. ISSN 0378-7753

Basha, C.A. and Rajendran, L. (2006) Theories of Ultramicrodisc Electrodes : Review article. International Journal of Electrochemical Science, 1 (6). pp. 268-282. ISSN 1452-3981

Bellakki, M.B. and Prakash, A.S. and Shivakumara, C. and Hegde, M.S. and Shukla, A.K. (2006) Solution-combustion synthesis of Bi1–xLnxO1×5 (Ln = Y and La–Yb)oxide ion conductors. Bulletin of Materials Science , 29 (4). pp. 339-345. ISSN 0250-4707

Bhaskaran, R. and Palaniswamy, N. and Rengaswamy, N.S. (2006) Life-cycle cost analysis of a concrete road bridge across open sea. Materials Performance, 45 (10). pp. 51-55. ISSN 0094-1492

Choudhury, N.A. and Shukla, A.K. and Sampath, S. and Pitchumani, S. (2006) Cross-Linked Polymer Hydrogel Electrolytes for Electrochemical Capacitors. Journal of the Electrochemical Society, 153 (3). A614-A620. ISSN 0013-4651

Doh, J.G. and Hong, J.S. and Vittal, R. and Kang, M.G. and Park, N.G. and Kim, K.J. (2006) Enhancement of photocurrent and photovoltage of dye-sensitized solar cells with TiO2 film deposited on indium zinc oxide substrate. Chemistry of Materials, 16 (3). pp. 493-497. ISSN 0897-4756

Elangovan, M. and Muthukumaran, A. and Anbukulandainathan, M. (2006) Comparison of solid state studies and electrochemical behavior of poly (dimethylsilane) and poly (dimethylstannum) film electrodes. Materials Letters, 60 (8). pp. 1099-1105. ISSN 0167-577X

Ganesan, M. and Sundararajan, S. and Dhananjeyan, M.V.T. and Sarangapani, K.B. and Renganathan, N.G. (2006) Synthesis and characterization of tetravalent titanium (Ti4+) substituted LiCoO2 for lithium-ion batteries. Materials Science and Engineering B, 131 (1-3). pp. 203-209. ISSN 0921-5107

Ganesh, V. and Pitchumani, S. and Lakshminarayanan, V. (2006) New symmetric and asymmetric supercapacitors based on high surface area porous nickel and activated carbon. Journal of Power Sources, 158 (2). pp. 1523-1532. ISSN 0378-7753

Geetha, S. and Rao, C.R.K. and Vijayan, M. and Trivedi, D.C. (2006) Biosensing and drug delivery by polypyrrole. Analytica Chimica Acta, 568 (1-2). pp. 119-125. ISSN 0003-2670

Harikrishnan, K. and John, S. and Srinivasan, K.N. and Praveen, J. and Ganesan, M. and Kavimani, P.M. (2006) An Overall Aspect of Electroless Ni-P Depositions—A Review Article. Metallurgical and Materials Transactions A, 37 (6). pp. 1917-1926. ISSN 1073-5623

Hariprakash, B. and Gaffoor, S.A. and Shukla, A.K. (2006) Lead-acid batteries for partial-state-of-charge applications. Journal of Power Sources, 191 (1). pp. 149-153.

Jeyaprabha, C. and Sathiyanarayanan, S. and Muralidharan, S. and Venkatachari, G. (2006) Corrosion Inhibition of Iron in 0.5 mol L-1 H2SO4 by Halide Ions. Journal of the Brazilian Chemical Society, 17 (1). pp. 61-67. ISSN 0103-5053

Jeyaprabha, C. and Sathiyanarayanan, S. and Venkatachari, G. (2006) Effect of cerium ions on corrosion inhibition of PANI for iron in 0.5 M H2SO4. Applied Surface Science, 253 (2). pp. 432-438. ISSN 0169-4332

Jeyaprabha, C. and Sathiyanarayanan, S. and Venkatachari, G. (2006) Influence of halide ions on the adsorption of diphenylamine on iron in 0.5M H2SO4 solutions. Electrochimica Acta, 51 (19). pp. 4080-4088. ISSN 0013-4686

Jeyaprabha, C. and Sathiyanarayanan, S. and Venkatachari, G. (2006) Polyaniline as Corrosion Inhibitor for Iron in Acid Solutions. Journal of Applied Polymer Science, 101 (4). pp. 2144-2153. ISSN 0021-8995

Johnberchmans, L. and Sivan, V. and Venkatakrishnaiyer, S. (2006) Studies on triazole derivatives as inhibitors for the corrosion of muntz metal in acidic and neutral solutions. Materials Chemistry and Physics, 98 (2-3). pp. 395-400. ISSN 0254-0584

Joseph, J. and Son, K.M. and Lee, W. and Kim, K.J. (2006) Quasi-solid-state dye-sensitized solar cells with siloxane poly(ethylene glycol) hybrid gel electrolyte. Semiconductor Science and Technology, 21 (5). pp. 697-701. ISSN 0268-1242

Kalaiselvan, R. and Augustin, C.O. and Sanjeeviraja, C. (2006) Characterization of SnO2-Coated CuFe2O4 Nanocomposites. Synthesis and Reactivity in Inorganic, Metal-Organic, and Nano-Metal Chemistry, 36 (1). pp. 115-119. ISSN 1553-3174

Kalaiselvan, R. and Augustin, C.O. and Sanjeeviraja, C. and Pol, V.G. and Gedanken, A. (2006) Optimization of sintering on the structural, electrical and dielectric properties of SnO2 coated CuFe2O4 nanoparticles. Materials Chemistry and Physics, 99 (1). pp. 109-116. ISSN 0254-0584

Kalaiselvan, R. and Augustin, C.O. and Sanjeeviraja, C. and Prabhakaran, D. (2006) Effect of SnO2 coating on the magnetic properties of nanocrystalline CuFe2O4. Solid State Communications, 137 (9). pp. 512-516. ISSN 0038-1098

Kalaiselvan, R. and Kalaiselvi, N. and Augustin, C.O. and Doh, C.H. (2006) SnO2 Pinning: An Approach to Enhance the Electrochemical Properties of Nanocrystalline CuFe2O4 for Lithium-Ion Batteries. Electrochemical and Solid-State Letters, 9 (8). A390-A394. ISSN 1099-0062

Kalaiselvan, R. and Kalaiselvi, N. and Augustin, C.O. and Doh, C.H. and Sanjeeviraja, C. (2006) CuFe2O4/SnO2 nanocomposites as anodes for Li-ion batteries. Journal of Power Sources, 157 (1). pp. 522-527. ISSN 0378-7753

Kalpana, D. and Justinjoseyphus, R. and Sivakumar, N. and Narayanasamy, A. and Ananth, M.V. (2006) Structural, magnetic and electrochemical studies on LiCo0.5Fe0.5O2. Ionics, 12 (6). pp. 371-378. ISSN 0947-7047

Kalpana, D. and Justinjoseyphus, R. and Venkateswaran, C. and Narayanasamy, A. and Ananth, M.V. (2006) Influence of magnetic properties on electrochemical activity of LiNi0.5Fe0.5O2. Journal of Power Sources, 156 (2). pp. 598-603. ISSN 0378-7753

Kalpana, D. and Omkumar, K.S. and Sureshkumar, S. and Renganathan, N.G. (2006) A novel high power symmetric ZnO/carbon aerogel composite electrode for electrochemical supercapacitor. Electrochimica Acta, 52 (3). pp. 1309-1315. ISSN 0013-4686

Kalpana, D. and Renganathan, N.G. and Pitchumani, S. (2006) A new class of alkaline polymer gel electrolyte for carbon aerogel supercapacitors. Journal of Power Sources, 157 (1). pp. 621-623. ISSN 0378-7753

Kim, D.K. and Muralidharan, S. and Ha, T.H. and Bae, J.H. and Ha, Y.C. and Lee, H.G. and Scantlebury, J.D. (2006) Electrochemical studies on the alternating current corrosion of mild steel under cathodic protection condition in marine environments. Electrochimica Acta, 51 (25). pp. 5259-5267. ISSN 0013-4686

Krishnan, S.M. (2006) Studies on corrosion resistant properties of sacrificial primed IPN coating systems in comparison with epoxy–PU systems. Progress in Organic Coatings, 57 (4). pp. 383-391. ISSN 0021-8995

Kumar, K.G. and John, K.S. and lndira, C.J. (2006) A chloride ion-selective potentiometric sensor based on a polymeric schiff base complex. Indian journal of chemical technology, 13 (1). pp. 13-16. ISSN 0971-457X

Kuppusamy, M.R. and Giridhar, V.V. (2006) Factor analysis of water quality characteristics including trace metal speciation in the coastal environmental system of Chennai Ennore. Environment International, 32 (2). pp. 174-179. ISSN 0160-4120

Kuppusamy, M.R. and Giridhar, V.V. (2006) Trace metal speciation in environmental aquartic samples of palar river, Mahabalipuram and its adjoining coast. Bulletin of Electrochemistry, 20 (3). pp. 119-124. ISSN 0256-1654

Manuelstephan, A. (2006) Review on gel polymer electrolytes for lithium batteries. European Polymer Journal, 42 (1). pp. 21-42. ISSN 0014-3057

Manuelstephan, A. and Nahm, K.S. and Anbukulandainathan, M. and Ravi, G. and Wilson, J. (2006) Electrochemical studies on nanofiller incorporated poly(vinylidene fluoride– hexafluoropropylene) (PVdF–HFP) composite electrolytes for lithium batteries. Journal of Applied Electrochemistry, 36 (10). pp. 1091-1097. ISSN 0021-891X

Manuelstephan, A. and Nahm, K.S. and Anbukulandainathan, M. and Ravi, G. and Wilson, J. (2006) Poly(vinylidene fluoride-hexafluoropropylene) (PVdF-HFP) based composite electrolytes for lithium batteries. European Polymer Journal, 42 (8). pp. 1728-1734. ISSN 0014-3057

Manuelstephan, A. and Nahm, K.S. and Premkumar, T. and Anbukulandainathan, M. and Ravi, G. and Wilson, J. (2006) Nanofiller incorporated poly(vinylidene fluoride–hexafluoropropylene) (PVdF–HFP) composite electrolytes for lithium batteries. Journal of Power Sources, 159 (2). pp. 1316-1321. ISSN 0378-7753

Manuelstephan, A. and Premkumar, T. and Ramesh, R. and Thomas, S. and Jeong, S.K. and Nahm, K.S. (2006) Pyrolitic carbon from biomass precursors as anode materials for lithium batteries. Materials Science and Engineering A, 430 (1-2). pp. 132-137. ISSN 0921-5093

Martha, S.K. and Hariprakash, B. and Gaffoor, S.A. and Trivedi, D.C. and Shukla, A.K. (2006) A low-cost lead-acid battery with high specific-energy. Journal of Chemical Sciences, 118 (1). pp. 93-98. ISSN 0974-3626

Martha , S.K. and Hariprakash, B. and Gaffoor, S.A. and Shukla, A.K. (2006) Lead-acid cells with polyaniline-coated negative plates. Journal of Applied Electrochemistry, 36 (6). pp. 711-722. ISSN 0021-891X

Maryvergheese, T. and Sheela, B. (2006) Selective NO reduction using blue ferrocenyl cation. Electrochimica Acta, 52 (2). pp. 567-574. ISSN 0013-4686

Mukherjee, D. and Khan, A.A. and Kumar, M.R. and Mukherjee, S. and Alagappan, A.N. and Nagarajan, P. and Nesarajl, A.S. and Ghosh, S. and Muzhumathi, S. (2006) Metastable surface modification processes for corrosion and oxidation control. Surface Engineering, 22 (5). pp. 411-416. ISSN 0267-0844

Murali, K.R. and Austine, A. and Jayasutha, B. and Trivedi, D.C. (2006) Photoelectrochemical cells based on CdSe films brush plated on high-temperature substrates. Solar Energy Materials and Solar Cells, 90 (6). pp. 753-759. ISSN 0927-0248

Murali, K.R. and Balasubramanian, M. (2006) Properties of pulse plated ZnSe films. Materials Science and Engineering: A, 431 (1-2). pp. 118-122. ISSN 0921-5093

Murali, K.R. and Elango, P. and Gopalakrishnan, P. (2006) Structural and optical properties of CdSe films brush plated on low temperature substrates. Materials Chemistry and Physics, 96 (1). pp. 103-106. ISSN 0254-0584

Murali, K.R. and Rajkumar, P.R. (2006) Characteristics of pulse plated ZnTe films. Journal of Materials Science: Materials in Electronics, 17 (5). pp. 393-396. ISSN 0957-4522

Murali, K.R. and Trivedi, D.C. (2006) Preparation and characterization of pulse electrodeposited GaAs films. Physica Status Solidi A, 203 (5). pp. 874-877. ISSN 1862-6300

Murali, K.R. and Trivedi, D.C. (2006) Preparation of pulse plated GaAs films. Journal of Physics and Chemistry of Solids, 67 (7). pp. 1432-1435. ISSN 0022-3697

Murali, K.R. and Ziaudeen, M. and Jayaprakash, N. (2006) Characteristics of brush plated ZnTe thin films. Journal of Materials Science, 41 (7). pp. 1887-1892. ISSN 0022-2461

Murali, K.R. and Ziaudeen, M. and Jayaprakash, N. (2006) Structural and electrical properties of brush plated ZnTe films. Solid-State Electronics, 50. pp. 1692-1695. ISSN 0038-1101

Muralidharan, S. and Ha, T.H. and Bae, J.H. and Ha, Y.C. and Lee, H.G. and Park, K.W. and Kim, D.K. (2006) Electrochemical studies on the solid embeddable reference sensors for corrosion monitoring in concrete structure. Materials Letters, 60 (5). pp. 651-655. ISSN 0167-577X

Muralidharan, V.S. and Visalakshi, R. and Vidhya, S.R. and Vedasri, V. (2006) Corrosion behaviour of glassy materials - A critical review. Corrosion Reviews, 24. pp. 1-25. ISSN 0334-6005

Muthukumar, N. and Maruthamuthu, S. and Palaniswamy, N. (2006) Water-soluble inhibitor on microbiologically influenced corrosion in diesel pipeline. Colloids and Surfaces B: Biointerfaces , 53 (2). pp. 260-270. ISSN 0927-7765

Muthulakshmi, B. and Kalpana, D. and Pitchumani, S. and Renganathan, N.G. (2006) Electrochemical deposition of polypyrrole for symmetric supercapacitors. Journal of Power Sources, 158 (2). pp. 1533-1537. ISSN 0378-7753

Narmada, P. and Venkateswararao, M. and Venkatachari, G. and Apparao, B.V. (2006) Synergistic inhibition of carbon steel by tertiary butyl phosphonate, zinc ions and citrate. Anti-Corrosion Methods and Materials, 53 (5). pp. 310-314. ISSN 0003-5599

Natesan, M. and Palaniswamy, N. and Rengaswamy, N.S. (2006) Atmospheric corrosivity Survey of India. Materials Performance, 45 (1). pp. 52-56. ISSN 0094-1492

Natesan, M. and Venkatachari, G. and Palaniswamy, N. (2006) Kinetics of atmospheric corrosion of mild steel, zinc, galvanized iron and aluminium at 10 exposure stations in India. Corrosion Science, 48 (11). pp. 3584-3608. ISSN 0010-938X

Noel, M. and Vijayabarathi, T. and Velayutham, D. and Jayaraman, K. (2006) The role of Ce(IV)/Ce(III) Redox Mediator in Indirect Electrochemical Oxidations. transactions of SAEST, 41 (1). pp. 12-17.

Palraj, S. and Venkatachari, G. (2006) Corrosion and bio fouling characteristics of mild steel in Mandapam waters. Materials Performance, 45 (6). pp. 46-50. ISSN 0094-1492

Periasamy, P. and Kalaiselvi, N. (2006) Electrochemical performance behavior of combustion-synthesized LiNi0.5Mn0.5O2 lithium-intercalation cathodes. Journal of Power Sources, 159 (2). pp. 1360-1364. ISSN 0378-7753

Porkodi, P. and Yegnaraman, V. and Jeyakumar, D. (2006) Polyol mediated synthesis of tungsten trioxide and Ti doped tungsten trioxide Part 1: Synthesis and characterisation of the precursor material. Materials Research Bulletin, 41 (8). pp. 1476-1486. ISSN 0025-5408

Prasad, D. and Sivaram, T.K. and Sheela, B. and Yegnaraman, V. (2006) Microbial fuel cell constructed with a micro-organism isolated from sugar industry effluent. Journal of Power Sources, 160 (2). pp. 991-996. ISSN 0378-7753

Rajagopal, G. and Maruthamuthu, S. and Mohanan, S. and Palaniswamy, N. (2006) Biocidal effects of photocatalytic semiconductor TiO2. Colloids and Surfaces B: Biointerfaces, 5 (2). pp. 107-111. ISSN 0927-7765

Raju, T. and Kalpanadevi, G. and Kulangiappar, K. (2006) Regioselective bromination of toluene by electrochemical method. Electrochimica Acta, 51 (22). pp. 4596-4600. ISSN 0013-4686

Raju, T. and Kulangiappar, K. and Anbukulandainathan, M. and Uma, U. and Malini, R. and Muthukumaran, A. (2006) Site directed nuclear bromination of aromatic compounds by an electrochemical method. Tetrahedron Letters, 47 (27). pp. 4581-4584. ISSN 0040-4039

Ramalechume, C. and Yegnaraman, V. and Mandal, A.B. (2006) Electrochemical rectification at electrode surface modified with poly (acrylic acid) and decane thiol. Journal of Solid State Electrochemistry, 10 (7). pp. 499-505. ISSN 1432-8488

Ramamoorthy, K. and Sanjeeviraja, C. and Jayachandran, M. and Sankaranarayanan, K. and Misra, P. and Kukreja, L.M. (2006) Development of a novel high optical quality ZnO thin films by PLD for III–V opto-electronic devices. Current Applied Physics, 6 (1). pp. 103-108. ISSN 1567-1739

Raman, R.K. and Prashant, S.K. and Shukla, A.K. (2006) A 28-W portable direct borohydride–hydrogen peroxide fuel-cell stack. Journal of Power Sources, 162 (2). pp. 1073-1076. ISSN 0378-7753

Raman, R.K. and Shukla, A.K. and Gayen, A. and Hegde, M.S. and Priolkar, K.R. and Sarode, P.R. and Emura, S. (2006) Tailoring a Pt–Ru catalyst for enhanced methanol electro-oxidation. Journal of Power Sources, 157 (1). pp. 45-55. ISSN 0378-7753

Rameshbabu, B. and Maruthamuthu, S. and Rajasekar, A. and Muthukumar, N. and Palaniswamy, N. (2006) Microbiologically influenced corrosion in dairy effluent. International journal of environmental science and technology, 3 (2). pp. 159-166. ISSN 1735-1472

Rameshbapu, G.N.K. and Jayakrishnan, S. (2006) Oxidation characteristics of electrodeposited nickel–zirconia composites at high temperature. Materials Chemistry and Physics, 96 (2-3). pp. 321-325. ISSN 0254-0584

Rao, C.R.K. and Lakshminarayanan, V. and Trivedi, D.C. (2006) Synthesis and characterization of lower size, laurylamine protected palladium nanoparticles. Materials Letters, 60 (26). pp. 3165-3169. ISSN 0167-577X

Rao, C.R.K. and Pushpavanam, M. (2006) Electrodeposition of platinum from platinum-ammine based baths. Transactions of the Institute of Metal Finishing, 84 (2). pp. 79-82. ISSN 0020-2967

Rao, C.R.K. and Trivedi, D.C. (2006) Biphasic synthesis of fatty acids stabilized silver nanoparticles: Role of experimental conditions on particle size. Materials Chemistry and Physics, 99 (2-3). pp. 354-360. ISSN 0254-0584

Rao, C.R.K. and Trivedi, D.C. (2006) A novel one-pot synthesis of free standing Pd–PPy films: Observation of enhanced catalytic effect by Pd–Ppy layers. Catalysis Communications, 7 (9). pp. 662-668. ISSN 1566-7367

Ravindran, V. and Jayakrishnan, S. (2006) Investigations on recovery of heavy metals from plating effluents. Transactions of the Institute of Metal Finishing, 84 (4). pp. 202-205. ISSN 0020-2967

Saaminathan, V. and Murali, K.R. (2006) Variation of Nd and Vfb for different compositions of CdSexTe1-x thin films by pulse plating technique. Physica B: Condensed Matter, 373 (2). pp. 233-239. ISSN 0921-4526

Samsonnesaraj, A. and Arulraj, I. and Pattabiraman, R. (2006) Tape casting of alternate electrolyte components for solid oxide fuel cells. Indian Journal of Engineering and Materials Sciences, 13 (4). pp. 347-356. ISSN 0971-4588

Sankar, S. and Paruthimalkalaignan, G. and Sankarasubramanian, M. and Amutha, K. and Marikkannu, K.R. and Vasudevan, T. and Selvaraj, M. (2006) Innovative Nanoparticle Clear Coat by IPN-Ceramic Pigments. Synthesis and Reactivity in Inorganic, Metal-Organic, and Nano-Metal Chemistry , 36 (2). pp. 197-201. ISSN 1553-3174

Sathaiyan, N. and Nandakumar, V. and Ramachandran, P. (2006) Hydrometallurgical recovery of silver from waste silver oxide button cells. Journal of Power Sources, 161 (2). pp. 1463-1468. ISSN 0378-7753

Sathiyanarayanan, S. and Azim, S.S. and Venkatachari, G. (2006) Corrosion resistant properties of polyaniline–acrylic coating on magnesium alloy. Applied Surface Science, 253 (4). pp. 2113-2117. ISSN 0169-4332

Sathiyanarayanan, S. and Devi, S. and Venkatachari, G. (2006) Corrosion protection of stainless steel by electropolymerised pani coating. Progress in Organic Coatings, 56 (2-3). pp. 114-119. ISSN 0021-8995

Sathiyanarayanan, S. and Jeyaprabha, C. and Muralidharan, S. and Venkatachari, G. (2006) Inhibition of iron corrosion in 0.5 M sulphuric acid by metal cations. Applied Surface Science, 252 (23). pp. 8107-8112. ISSN 0169-4332

Sathiyanarayanan, S. and Muthkrishnan, S. and Venkatachari, G. (2006) Corrosion protection of steel by polyaniline blended coating. Electrochimica Acta, 51 (28). pp. 6313-6319. ISSN 0013-4686

Sathiyanarayanan, S. and Muthukrishnan, S. and Venkatachari, G. (2006) Effects of Polyaniline Content in Chlorrub-Based Coatings on Corrosion Protection of Steel. Journal of Applied Polymer Science, 102 (4). pp. 3994-3999. ISSN 0021-8995

Sathiyanarayanan, S. and Muthukrishnan, S. and Venkatachari, G. (2006) Performance of polyaniline pigmented vinyl acrylic coating on steel in aqueous solutions. Progress in Organic Coatings, 55 (1). pp. 5-10. ISSN 0021-8995

Sathiyanarayanan, S. and Muthukrishnan, S. and Venkatachari, G. (2006) Synthesis and anticorrosion properties of polydiphenylamine blended vinyl coatings. Synthetic Metals, 156. pp. 1208-1212. ISSN 0379-6779

Sathiyanarayanan, S. and Panjali, N. and Saravanan, K. and Srinivasan, S. and Venkatachari, G. (2006) Corrosion monitoring of steel in concrete by galvanostatic pulse technique. Cement and Concrete Composites, 28 (7). pp. 630-637. ISSN 0958-9465

Savarimuthu, E. and Sankarasubramanian, N. and Subramanian, B. and Jayachandran, M. and Sanjeeviraja, C. and Ramamurthy, S. (2006) Preparation and characterisation of nanostructured tin oxide (SnO,) films by sol-gel spin coating technique. Surface Engineering, 22 (4). pp. 268-276. ISSN 0267-0844

Sekar, R. and Sobha , J. (2006) Characteristics of zinc electrodeposits from acetate solutions. Journal of Applied Electrochemistry, 36 (5). pp. 591-597. ISSN 0021-891X

Selvaraj, M. and Maruthan, K. and Venkatachari, G. (2006) Studies on enhancement of surface durability for steel surface by camphor oil modiWed epoxy polyamide coating. Corrosion Science, 48 (12). pp. 4365-4377. ISSN 0010-938X

Selvi, P. and Ramasami, M. and Samuel, M.H.P. and Adaikkalam, P. and Srinivasan, G.N. (2006) Recovery of Gallium from Bayer Liquor Using Chelating Resins in Fixed-Bed Columns. Industrial and Engineering Chemistry Research, 43 (9). pp. 2216-2221. ISSN 0888-5885

Senthilkumar, S. and Mathiyarasu, J. and Phani, K.L.N. and Yegnaraman, V. (2006) Simultaneous determination of dopamine and ascorbic acid on poly (3,4-ethylenedioxythiophene) modified glassy carbon electrode. Journal of Solid State Electrochemistry, 10 (11). pp. 905-913. ISSN 1432-8488

Shanmugam, N.V. and John, S. (2006) Electrodeposition of Chromium-Nickel-Iron alloy coatings from non-toxic electrolytes. Indian Surface Finishing , 3 (3-4). pp. 368-380. ISSN 0972-9364

Shanmugasigamani, S. and Pushpavanam, M. (2006) Bright zinc-cobalt alloy deposits from an alkaline non-cyanide bath. Transactions of the Institute of Metal Finishing, 84 (6). pp. 326-331. ISSN 0020-2967

Shanmugasigamani, S. and Pushpavanam, M. (2006) Role of additives in bright zinc deposition from cyanide free alkaline baths. Journal of Applied Electrochemistry, 36 (3). pp. 315-322. ISSN 0021-891X

Shanmugasigamani, S. and Pushpavanam, M. (2006) A noncyanide alkaline bath for Zinc-Nickel alloy deposition. Indian Surface Finishing, 3 (3-4). pp. 345-358. ISSN 0972-9364

Sheela, B. and Nirmal, R.G. and Prabaharan, G. and Mishra, A.K. and Yegnaraman, V. (2006) Solution phase electron transfer versus bridge mediated electron transfer across carboxylic acid terminated thiols. Journal of solid state electrochemistry, 10 (7). pp. 439-446. ISSN 1432-8488

Sheela, G. and Pushpavanam, M. (2006) Corrosion behaviour of electrochemically joined aluminium and titanium. Indian surface finishing, 3 (3-4). pp. 333-344. ISSN 0972-9364

Sherwood, D. and Emmanuel, B. (2006) Computing Shapes of Nanocrystals from X-ray Diffraction Data. Crystal Growth and Design, 6 (6). pp. 1415-1419. ISSN 1528-7483

Sivakumar, R. and Gopalakrishnan, R. and Jayachandran, M. and Sanjeeviraja, C. (2006) Investigation of x-ray photoelectron spectroscopic (XPS), cyclic voltammetric analyses ofWO3 films and their electrochromic response in FTO/WO3/electrolyte/FTO cells. Smart Materials and Structures, 15 (3). pp. 877-888. ISSN 0964-1726

Sivakumar, R. and Manisankar, P. and Jayachandran, M. and Sanjeeviraja, C. (2006) Intercalation studies on electron beam evaporated MoO3 films for electrochemical devices. Solar Energy Materials and Solar Cells , 90 (15). pp. 2438-2448. ISSN 0927-0248

Sivashanmugam, A. and Thirunakaran, R. and Zou, M. and Yoshio, M. and Yamaki, J.I. and Gopukumar, S. (2006) Glycine-Assisted Sol-Gel Combustion Synthesis and Characterization of Aluminum-Doped LiNiVO4 for Use in Lithium-Ion Batteries. Journal of the Electrochemical Society, 153 (3). A497-A503. ISSN 0013-4651

Song, C.H. and Stephan, A.M. and Jeong, S.K. and Hwang, Y.J. and Kim, A.R. and Nahm, K.S. (2006) Influence of Solvents on the Structural and Electrochemical Properties of Li†Li0.2Ni0.1Co0.2Mn0.5‡O2 Prepared by a Solvothermal Reaction Method. Journal of the Electrochemical Society, 153 (2). A390-A395. ISSN 0013-4651

Sozhan, G. and Mohan , S. and Vasudevan, S. and Balaji, R. and Pushpavanam, S. (2006) Recovery of Chromium from the Solid Residue by In-Situ-Generated Hypochlorite. Industrial and Engineering Chemistry Research, 45 (23). pp. 7743-7747. ISSN 0888-5885

Sripriya, R. and Chandrasekaran, M. and Noel, M. (2006) Voltammetric analysis of hydroquinone, ascorbic acid, nitrobenzene and benzyl chloride in aqueous, non-aqueous, micellar and microemulsion media. Colloid and Polymer Science, 285 (1). pp. 39-48. ISSN 0303-402X

Subramanian, B. and Jayachandran, M. and Jayakrishnan, S. (2006) Sequential deposition of Cu-Ni by electron beam evaporation and its characterisation. Transactions of the Institute of Metal Finishing, 84 (1). pp. 52-55. ISSN 0020-2967

Subramanian, B. and Jayachandran, M. and Jayakrishnan, S. (2006) Surface characterisation studies of nickel-chromium PVD: EB evaporated low carbon steel samples. Surface Engineering, 22 (6). pp. 447-451. ISSN 0267-0844

Subramanian, B. and Mohan, S. and Sobha, J. (2006) Structural, microstructural and corrosion properties of brush plated copper–tin alloy coatings. Surface & Coatings Technology, 201 (3-4). pp. 1145-1151. ISSN 0257-8972

Thirumalai, P. and Ravi, R. and Parthiban, G.T. (2006) Potential monitoring system for corrosion of steel in concrete. Advances in Engineering Software, 37 (6). pp. 375-381. ISSN 0965-9978

Tietz, F. and Arulraj, I. and Stover, D. (2006) Statistical design of experiments for evaluation of Y-Zr-Ti oxides as anode materials in solid oxide fuel cells. British Ceramic Transactions, 103 (5). pp. 202-210. ISSN 0967-9782

Tietz, F. and Arulraj, I. and Zahid, M. and Stover, D. (2006) Electrical conductivity and thermal expansion of La0.8Sr0.2(Mn,Fe,Co)O3-y perovskites. Solid State Ionics, 177 (19-25). pp. 1753-1756. ISSN 0167-2738

Vasudevan, S. and Mohan , S. (2006) Electrochemical Preparation of Barium Chlorate from Barium Chloride. Industrial and Engineering Chemistry Research, 45 (9). pp. 2923-2928. ISSN 0888-5885

Vasudevan, S. and Mohan , S. and Sozhan, G. and Raghavendran, N.S. and Murugan, C.V. (2006) Studies on the Oxidation of As(III) to As(V) by In-Situ-Generated Hypochlorite. Industrial and Engineering Chemistry Research, 45 (22). pp. 7729-7732. ISSN 0888-5885

Vatsalarani, J. and Geetha, S. and Trivedi, D.C. and Warrier, P.C. (2006) Stabilization of zinc electrodes with a conducting polymer. Journal of Power Sources, 158 (2). pp. 1484-1489. ISSN 0378-7753

Veeramani, P. and Silaimani, S.M. and John, S. (2006) Electroforming of Nickel-Tungsten alloy for high temperature applications. Indian Surface Finishing, 3 (3-4). pp. 359-367. ISSN 0972-9364

Velayutham, D. and Jayaraman, K. and Kulangiappar , K. and Ilayaraja, N. and Rambabu, Y. and Santhanrao, P. and Narayanareddy, S. and Victorbabu, K. and Noel, M. (2006) Free radical and isomerisation processes during the electrochemical fluorination of n-butyryl chloride, i-butyryl chloride and pivaloyl chloride in anhydrous hydrogen fluoride. Journal of Fluorine Chemistry, 127 (8). pp. 1111-1118. ISSN 0022-1139

Venkatesan, P. and Palaniswamy, N. and Rajagopal, K. (2006) Corrosion performance of coated reinforcing bars embedded in concrete and exposed to natural marine environment. Progress in Organic Coatings, 56 (1). pp. 8-12. ISSN 0021-8995

Vijayalakshmi, R. and Jayachandran, M. and Trivedi, D.C. and Sanjeeviraja, C. (2006) Characterization of WO3 Thin Films Prepared at Different Deposition Currents on CTO Substrates. Synthesis and Reactivity in Inorganic, Metal-Organic and Nano-Metal Chemistry, 36 (1). pp. 89-94. ISSN 1553-3174

Vijayasekaran, B and Basha, C.A. (2006) A novel approach for computing tertiary current distributions based on simplifying assumptions. Journal of Applied Electrochemistry, 36 (7). pp. 745-757. ISSN 0021-891X

Vijayasekaran, B. and Basha, C.A. (2006) Dynamic optimization of electrochemical reactors for the exact optimal control of consecutive electrochemical reactions. Chemical Engineering Journal, 117 (3). pp. 213-221. ISSN 1385-8947

Vijayasekaran, B. and Basha, C.A. (2006) Shrinking core discharge model for the negative electrode of a lead-acid battery. Journal of Power Sources, 158 (1). pp. 710-721. ISSN 0378-7753

Visalakshi, R. and Muralidharan, V.S. (2006) Characterization of zinc–nickel alloy electrodeposits obtained from sulphamate bath containing substituted aldehydes. Bulletin of Materials Science, 29 (3). pp. 293-301. ISSN 0250-4707

Vishnudevan, M. and Thangavel, K. (2006) Evaluation of organic based corrosion inhibiting admixtures for reinforced concrete. Anti-Corrosion Methods and Materials , 53 (5). pp. 271-276. ISSN 0003-5599

Vittal, R. and Gomathi, H. and Kim, K.J. (2006) Beneficial role of surfactants in electrochemistry and in the modification of electrodes. Advances in Colloid and Interface Science, 119 (1). pp. 55-68. ISSN 0001-8686

Wilson, J. and Ravi, G. and Anbukulandainathan, M. (2006) Electrochemical Studies on Inert Filler Incorporated Poly (Vinylidene Fluoride – Hexafluoropropylene) (PVDF – HFP) Composite Electrolytes. Polímeros, 16 (2). pp. 88-93. ISSN 0104-1428

Zahid, M. and Arulraj, I. and Fischer, W. and Tietz, F. and Serraalfaro, J.M. (2006) Synthesis and investigations on the stability of La0.8Sr0.2CuO2.4+δ at high temperatures. Solid State Ionics, 177. pp. 3205-3210. ISSN 0167-2738