Article

Paul Raj, R. and Mohan, S. and Jha, S.K. (2016) Controlled reverse pulse electrosynthesized spikepiece-structured Ni/Ni(OH)2 interlayer nanoplates for electrochemical pseudocapacitor applications. Chemical Communications, 50. pp. 1930-1933. ISSN 1359-7345

Kaleesh Kumar, M. and Vishnu Prataap, R.K. and Mohan, S. and Jha, S.K. (2016) Preparation of electro-reduced graphene oxide supported walnut shape nickel nanostructures, and their application to selective detection of dopamine. Microchimica Acta, 183. pp. 1759-1768. ISSN 0026-3672

Vijayakumar, J. and Mohan, S. (2013) Effect of benzyl alcohol and thiourea on electrodeposition of cadmium: electrochemical impedance spectroscopy study. Transactions of the Institute of Metal Finishing, 91 (3). pp. 165-168. ISSN 0020-2967

Saravanan, G. and Mohan, S. (2013) Nucleation of copper on mild steel in copper chloride (CuCl2�2H2O)–1-ethyl-3-methylimidazolium chloride [EMIM]Cl–ethylene glycol (EG) ionic liquid. New Journal of Chemistry, 37. pp. 2564-2567. ISSN 1144-0546

Shailendra , K.Jha and Naveen Kumar, C. and Pavul Raj, R. and Niki, S.Jha and Mohan, S. (2013) Synthesis of 3D porous CeO2/reduced graphene oxide xerogel composite and low level detection of H2O2. Electrochimica Acta. ISSN 0013-4686 (Unpublished)

Rajasekaran, N. and Mohan, S. (2012) Giant Magnetoresistance in Electrodeposited Films: Current Status and the Influence of Parameters. Critical Reviews in Solid State and Materials Sciences, 37. pp. 158-180.

Mohan, S. and Saravanan, G. and Bund, A. (2012) Role of magnetic forces in pulse electrochemical deposition of Ni nanoAl2O3 composites. Electrochimica Acta, 64. pp. 94-99. ISSN 0013-4686

Vijayakumar, J. and Mohan, S. and Yadav, S.S. (2011) Effects of primary dicarboxylic acids on microstructure and mechanical properties of sub-microcrystalline Ni–Co alloys. Journal of Alloys and Compounds, 509 (040). pp. 9692-9695. ISSN 0925-8388

Saravanan, G. and Mohan, S. (2010) Structure, current efficiency, and corrosion properties of brush electrodeposited (BED) Cr from Cr(III)dimethyl formamide (DMF)-bath. Journal of Applied Electrochemistry, 40. pp. 1-6. ISSN 0021-891X

Saravanan, G. and Mohan, S. (2009) Corrosion behavior of Cr electrodeposited from Cr(VI) and Cr(III)-baths using direct (DCD) and pulse electrodeposition (PED) techniques. Corrosion Science, 51 (1). pp. 197-202. ISSN 0010-938X

Balasubramanian, A. and Srikumar, D.S. and Raja, G. and Saravanan, G. and Mohan, S. (2009) Effect of pulse parameter on pulsed electrodeposition of copper on stainless steel. Surface Engineering, 25 (5). pp. 389-392. ISSN 0267-0844

Mohan, S. and Ravindran, V. and Subramanian, B. and Saravanan, G. (2009) Electrodeposition of zinc–nickel alloy by pulse plating using non-cyanide bath. Transactions of the Institute of Metal Finishing, 87 (2). pp. 85-89. ISSN 0020-2967

Mohan, S. and Vijayakumar, J. and Saravanan, G. (2009) Influence of CH3SO3H and AlCl3 in direct and pulse current electrodeposition of trivalent chromium. Surface Engineering, 25 (8). pp. 570-576. ISSN 0267-0844

Ilayaraja, M. and Mohan, S. and Gnanamuthu, R.M. and Saravanan, G. (2009) Nanocrystalline zinc–nickel alloy deposition using pulse electrodeposition (PED) technique. Transactions of the Institute of Metal Finishing, 87 (3). pp. 145-148. ISSN 0020-2967

Rajasekaran, N. and Mohan, S. (2009) Preparation, corrosion and structural properties of Cu–Ni multilayers from sulphate/citrate bath. Corrosion Science, 51 (9). pp. 2139-2143. ISSN 0010-938X

Mohan, S. and Rajasekaran, N. (2009) Pulse electrodeposition of tin from sulphate bath. Surface Engineering, 25 (8). pp. 634-638. ISSN 0267-0844

Saravanan, G. and Mohan, S. (2009) Pulsed electrodeposition of microcrystalline chromium from trivalent Cr-DMF bath. Journal of Applied Electrochemistry, 39 (8). pp. 1393-1397. ISSN 0021-891X

Rajasekaran, N. and Mohan, S. (2009) Structure, microstructure and corrosion properties of brush-plated Cu–Ni alloy. Journal of Applied Electrochemistry, 39 (10). pp. 1911-1916.

Saravanan, G. and Mohan, S. and Gnanamuthu, R.M. and Vijayakumar, J. (2008) Effect of AlCl3, CH3SO3H on thickness, current efficiency and corrosion properties of brush plated Cr(III) formate urea baths. Surface Engineering, 24 (6). pp. 458-463. ISSN 0267-0844

Shanthi, C. and Barathan, S. and Jaiswal, R. and Arunachalam, R.M. and Mohan, S. (2008) The effect of pulse parameters in electro deposition of silver alloy. Materials Letters, 62 (30). pp. 4519-4521. ISSN 0167-577X

Subramanian, B. and Mohan, S. and Sobha , J. (2007) Selective area deposition of Tin–Nickel alloy coating – an alternative for decorative chromium plating. Journal of Applied Electrochemistry, 37. pp. 219-224.

Subramanian, B. and Mohan, S. and Sobha , J. and Jayachandran, M. (2007) Structural and electrochemical characterization of Ni nanostructure films on steels with brush plating and sputter deposition. Current Applied Physics, 7. pp. 305-313.

Mohan , S. and Subramanian, P. and Vasudevan, S. (2007) Studies on the Electrochemical Preparation of Sb2O3. Industrial and Engineering Chemistry Research, 46. pp. 7870-7874. ISSN 0888-5885

Vasudevan, S. and Mohan , S. (2007) Studies on the Electrolytic Preparation of Ba(ClO4)2. Industrial and Engineering Chemistry Research, 46. pp. 6211-6216. ISSN 0888-5885

Vasudevan, S. and Mohan , S. (2006) Electrochemical Preparation of Barium Chlorate from Barium Chloride. Industrial and Engineering Chemistry Research, 45 (9). pp. 2923-2928. ISSN 0888-5885

Sozhan, G. and Mohan , S. and Vasudevan, S. and Balaji, R. and Pushpavanam, S. (2006) Recovery of Chromium from the Solid Residue by In-Situ-Generated Hypochlorite. Industrial and Engineering Chemistry Research, 45 (23). pp. 7743-7747. ISSN 0888-5885

Subramanian, B. and Mohan, S. and Sobha, J. (2006) Structural, microstructural and corrosion properties of brush plated copper–tin alloy coatings. Surface & Coatings Technology, 201 (3-4). pp. 1145-1151. ISSN 0257-8972

Vasudevan, S. and Mohan , S. and Sozhan, G. and Raghavendran, N.S. and Murugan, C.V. (2006) Studies on the Oxidation of As(III) to As(V) by In-Situ-Generated Hypochlorite. Industrial and Engineering Chemistry Research, 45 (22). pp. 7729-7732. ISSN 0888-5885

Basavaraja, C. and Kulkarni, V.R. and Vishnuvardhan, T.K. and Mohan, S. and Iyer, Y.M. and Subba Rao, G.V. (2005) Simulation of the effect of oxalic acid and acetone on the bistabel behaviour of the minimal bromate oscillator in a CSTR. Indian Journal of Chemistry, 44A (10). pp. 1984-1987.

Mohan, S. and Raj, V. (2005) A comparative study of DC and pulse gold electrodeposits. Transactions of the Institute of Metal Finishing, 83 (2). pp. 72-76. ISSN 0020-2967

Mohan, S. and Raj, V. (2005) The effect of additives on the pulsed electrodeposition of copper. Transactions of the Institute of Metal Finishing, 83 (4). pp. 194-198. ISSN 0020-2967

Vasudevan, S. and Sozhan, G. and Mohan, S. and Pushpavanam, S. (2005) An electrochemical process for the separation of cerium from rare earths. Hydrometallurgy, 76 (1). pp. 115-121.

Basavaraja, C. and Kulkarni, V.R. and Mohan, S. and Iyer, Y.M. and Subbarao, G.V. (2004) Experimental studies on BZ reaction system containing oxalic acid and acetone as mixed organic substrate in a CSTR. Indian Journal of Chemistry : A, 43 (04). pp. 739-742. ISSN 0376-4710

Mohan, S. and Krishnan, R.M. and Renganathan, N.G. and Raman, S. and Ganeskesari, B. and Latha, H. (2003) Corrosion studies on pulsed and direct current chromium deposits. Transactions of the Institute of Metal Finishing, 81 (05). pp. 172-175. ISSN 0020-2967

Raj, V. and Kanagaraj, D. and Mohan, S. (2003) Effect of sealing agents on the corrosion behaviour of sulphamic acid anodized alumina films. Transactions of the Institute of Metal Finishing, 81 (03). pp. 83-88. ISSN 0020-2967

Subramanian, A. and Mohan, S. and Vasudevan, T. (2002) Corrosion resistance of electropolished stainless steels. Bulletin of Electrochemistry , 18 (3). pp. 97-98. ISSN 0256-1654

Mohan, S. and Shriram, S. and Karthikeyan, S. (2002) Electrodeposition of nanocrystalline nickel. Bulletin of Electrochemistry , 18 (6). pp. 241-246. ISSN 0256-1654

Mohan, S. and Kanagaraj, D. and Sindhuja, R. and Vijayalakshmi, S. and Renganathan, N.G. (2001) Electropolishing of stainless steel - a review. Transactions of the Institute of Metal Finishing, 79 (04). pp. 140-142. ISSN 0020-2967

Mohan, S. and Venkatachalam, R. and Renganathan, N.G. and Rajeswari, C. (2001) Quantification of additives in nickel watt's bath by cyclic voltammeric stripping technique. Transactions of the Institute of Metal Finishing, 79 (02). pp. 73-76. ISSN 0020-2967

Shriram, S. and Mohan, S. and Renganathan, N.G. and Venkatachalam, R. (2000) Electrodeposition of nanocrystalline nickel – a brief preview. Transactions of the Institute of Metal Finishing, 78 (05). pp. 194-197. ISSN 0020-2967

Jeyasree, G. and Subramanian, A. and Vasudevan, T. and Mohan, S. and Venkatachalam, R. (2000) Electropolishing of stainless steel. Bulletin of Electrochemistry , 16 (9). pp. 338-391. ISSN 0256-1654

Jayachandran, M. and Mohan, S. and Subramanian, B. and Sanjeeviraja, C. and Ganesan, V. (2000) Studies on the brush plated SnS thin films. Journal of materials Science Letters, 20. pp. 381-383.

Kanagaraj, D. and Mohan, S. and Renganathan, N.G. and Raj , V. and Venkataramanan, R. and Iyer, S.V. (1999) Impedance study of aluminium surface subjected to various surface treatments. Bulletin of Electrochemistry , 15 (3-4). pp. 164-168. ISSN 0256-1654

Mohan, S. and Venkatachalam, R. and Srividhya, K. (1999) Studies on pulse plating of nickel with and without additives. Bulletin of Electrochemistry , 15 (7-8). pp. 257-261. ISSN 0256-1654

Mohan, S. and Venkatachalam, R. (1998) Brush plating - present state of art. Bulletin of Electrochemistry , 14 (12). pp. 472-475. ISSN 0256-1654

Mohan, S. and Venkatachalam, R. (1998) A new batch for electropolishing of stainless steel. Transactions of the Metal Finishers Association of India, 07 (03). pp. 221-224.