Number of items: 123. AAhamed, M.G.S.B. and Nagarethinam, V.S. and Balu, A.R. and Thayumanavan, A. and Murali, K.R. and Sanjeeviraja, C. and Jayachandran, M. (2010) Influence of substrate temperature on the properties of electron beam evaporated ZnSe films. Crystal Research and Technology, 45 (4). 421 -426. ISSN 0232-1300 Ahamed, M.G.S.B. and Nagarethinam, V.S. and Thayumanavan, A. and Murali, K.R. and Sanjeeviraja, C. and Jayachandran, M. (2010) Structural, optical, electrical and morphological properties of ZnTe films deposited by electron beam evaporation. Journal of Materials Science, 21. pp. 1229-1234. ISSN 0022-2461 Aman, N. and Mishra, T. and Sahu, R.K. and Tiwari, J.P. (2010) Facile synthesis of mesoporous N doped zirconium titanium mixed oxide nanomaterial with enhanced photocatalytic activity under visible light. Journal of Materials Chemistry, 20. pp. 10876-10882. ISSN 0959-9428 Amutha, R. and Josiah, J.J.M. and Adriel Jebin, J. and Jagannathan, P. and Sheela, B. (2010) Chromium hexacyanoferrate as a cathode material in microbial fuel cells. Journal of Applied Electrochemistry, 40. pp. 1985-1990. ISSN 0021-891X Anandhakumar, S. and Chandrasekaran, M. and Noel, M. (2010) Anodic oxidation of chlorophenols in micelles and microemulsions on glassy carbon electrode: the medium effect on electroanalysis and electrochemical detoxification. Journal of Applied Electrochemistry, 40. pp. 303-310. ISSN 0021-891X Angappan, S. and Rajalakshmi, A. and Arockia, V. and Berchmans, L.J. and Visuvasam, A. (2010) Aluminum Nitride by Microwave Assisted Synthesis: Effect of Added Ammonium Chloride1. International Journal of Self Propagating High Temperature Synthesis, 19 (3). pp. 214-220. ISSN International Journal of Self Propagating High Temperature Synthesis Angulakshmi, N. and Premkumar, T. and Thomas, S. and Manuelstephan, A. (2010) Ionic conductivity and interfacial properties of nanochitin-incorporated polyethylene oxide–LiN(C2F5SO2)2 polymer electrolytes. Electrochimica Acta, 55. pp. 1401-1406. Ashvini, B.D. and Vinayak, S.K. and Vishal, M.D. and Vijayamohanan, K.Pillai and Manjusha, V.S. (2010) Direct transfer of micro-molded electrodes for enhanced mass transport and water management in PEMFC. Electrochemistry Communications, 12. pp. 1638-1641. ISSN 1388-2481 Asokan, K. and Subramanian, K. (2010) 3. Development of electrochemical process for the production of Tetra Ethyl Ammonium Hydroxide (TEAH) from Tetra Ethyl Ammonium Bromide (TEAB). Technical Report. CSIR-Central Electrochemical Research Institute. (Unpublished) Asokan, K. and Subramanian, K. (2010) Development of electrochemical process for the production of KMnO4 from MnO2 and KOH. Technical Report. CSIR-Central Electrochemical Research Institute. (Unpublished) Asokan, K. and Subramanian, K. (2010) Development of electrochemical process for the production of Tetra Propyl Ammonium Hydroxide (TPAH) from Tetra Propyl Ammonium Bromide (TPAB). Technical Report. CSIR-Central Electrochemical Research Institute. (Unpublished) Asokan, K. and Subramanian, K. (2010) Electrochlorinator for the in-situ electro synthesis of sodium hypochlorite for disinfection of water. Technical Report. CSIR-Central Electrochemical Research Institute. (Unpublished) Athijayamani, A. and Thiruchitrambalam, M. and Natarajan, U. and Pazhanivel, B. (2010) Influence of Alkali-Treated Fibers on the Mechanical Properties and Machinability of Roselle and Sisal Fiber Hybrid Polyester Composite. POLYMER COMPOSITES. BBabu, G. and Kalaiselvi, N. and Bhuvaneswari, D. and Doh, C.H. (2010) On the Synergistic Effect of Carbonate Anion Directed Shape Controlled Morphology and Super P Carbon in Preparing LiFePO4/C Cathode With Improved Lithium Intercalation Behavior. International Journal of ELECTROCHEMICAL SCIENCE, 5. 1597 -1604. ISSN 1452-3981 Bahramy, M.S. and Murugan, P. and Das, G.P. and Kawazoe, Y. (2010) Effect of electron correlations on structural phase stability, magnetism, and spin-dependent transport in CeMnNi4. PHYSICAL REVIEW, 81. ISSN 1098-0121 CSIR-CECRI (2010) A process for the treatment of textile dye bath effluent. 238803. Basha, C.A. and Soloman, P.A. and Velan, M. and Miranda, L.R. and Balasubramanian, N. and Siva, R. (2010) Electrochemical degradation of specialty chemical industry effluent. Journal of Hazardous Materials, 176. pp. 154-164. ISSN 0304-3894 Beena, K.B. and Vinayak, S.K. and Pradnya, P.A. and Manjusha, V.S. and Vijayamohanan, K.Pillai and Sreekumar , K. (2010) High aspect ratio nanoscale multifunctional materials derived from hollow carbon nanofiber by polymer insertion and metal decoration. Chemical Communications, 46. pp. 5590-5592. ISSN 1359-7345 Bellakki, M.B. and Shivakumara, C. and Vasanthacharya, N.Y. and Prakash, A.S. (2010) Rapid synthesis of room temperature ferromagnetic Ag-doped LaMnO3 perovskite phases by the solution combustion method. Materials Research Bulletin, 45. pp. 1685-1691. ISSN 0025-5408 Bhakti, S. and Kulkarni, S. and Sailaja, K. and Sourav, P. (2010) Probing Lewis acidity and reactivity of Sn- and Ti-beta zeolite using industrially important moieties: A periodic density functional study. Journal of Molecular Catalysis, 329. pp. 36-43. Bhalchandra, A.K. and Vijayamohanan, K.Pillai and Dattatray, J. L. and Padmakar, G. C. and Farid, J. S. and Mahendra, A. M. and Dilip, S. J. (2010) High current density, low threshold field emission from functionalized carbon nanotube bucky paper. Applied Physics Letters. ISSN 0003-6951 Bhaskar, R.S. and Beena, K.B. and Vijayamohanan, K.Pillai (2010) Tunable optical features from self-organized rhodium nanostructures. Applied Physics Letters, 96 (233102). ISSN 0003-6951 Bhaskar, R.S. and Bhalchandra, A. K. and Ajay, K. and Mohammednazar, A. and Vijayamohanan, K.Pillai (2010) Synthesis of Rh–carbon nanotube based heterostructures and their enhanced field emission characteristics. Chemical Communications, 46. pp. 5671-5673. ISSN 1359-7345 CChandrasekar, M.S. and Shanmugaigamani, S. and Malathy, P. (2010) Structural and textural study of electrodeposited zinc from alkaline non-cyanide electrolyte. Journal of Materials Science, 45. pp. 1160-1169. ISSN 0022-2461 Chandrasekar, M.S. and Shanmugasigamani, S. and Pushpavanam, M. (2010) Synergetic effects of pulse constraints and additives in electrodeposition of nano-crystalline zinc:Corrosion,structural and textural characterization. Materials Chemistry and Physics, 124. pp. 516-528. Chellammal, S. and Raghu, S. and Kalaiselvi, P. and Subramanian, G. (2010) Electrolytic recovery of dilute copper from a mixed industrial effluent of high strength COD. Journal of Hazardous Materials, 180. pp. 91-97. ISSN 0304-3894 Chellammal, S. and Raghu, S. and Kalaiselvi, P. and Subramanian, G. (2010) Electrolytic recovery of dilute copper from a mixed industrial effluent of high strength COD. Journal of Hazardous Materials, 180. pp. 91-97. ISSN 0304-3894 Choi, J.H. and Maruthamuthu, S. and Lee, H.G. and Ha, T.H. and Bae, J.H. and Alshawabkeh, A.N. (2010) Removal of phosphate from agricultural soil by electrokinetic remediation with iron electrode. Journal of Applied Electrochemistry, 40. pp. 1101-1111. ISSN 0021-891X DDoh, C.H. and Veluchamy, A. and Lee, D.J. and Lee, J.H. and Moon, S.I. and Park, C.W. and Kim, D.W. (2010) Comparative Study on Performances of Composite Anodes of SiO, Si and Graphite for Lithium Rechargeable Batteries. Bulletin of the Korean Chemical Society, 31 (5). pp. 1257-1261. EElango, A. and Periasamy, V.M. and Paramasivam, M. and Rakesh, E. (2010) Novel polymeric inhibitor fo corrosion of 575 a um-nium in 2M NaOH solutions. Anti Corrosion Methods and Materials, 57 (1). pp. 3-5. ISSN 0003-5599 Emmanuel, E.S.C. and Anandkumar, B. and Natesan, M. and Maruthamuthu, S. (2010) Efficacy of rare earth elements on the physiological and biochemical characteristics of Zea mays L. Jouranal of American Chemical Society, 4 (4). pp. 289-294. Emmanuel, E.S.C. and Ramachandran, A.M. and Ravindran, A.D. and Natesan, M. and Maruthamuthu, S. (2010) Effect of some pare earth elements on dry matter partitioning, nodule formation and chlorophyll content in Arachis hypogaea L. plants. AJCS, 4 (9). pp. 670-675. FFarid, J.S. and Mahendra, A.M. and Sandesh, R.J. and Patil, K.R. and Vijayamohanan, K.Pillai and Dilip, S.J. (2010) Observation of Photoconductivity in Sn-Doped ZnO Nanowires and Their Photoenhanced Field Emission Behavior. Journal of Physical Chemistry C. pp. 3843-3849. ISSN 1932-7447 Fey, G.T.K. and Chang, C.S. and Premkumar, T. (2010) Synthesis and surface treatment of LiNi1/3Co1/3Mn1/3O2 cathode materials for Li-ion batteries. Journal of Solid State Electrochemistry, 14. pp. 17-26. ISSN 1432-8488 Firozbabu, K. and Anbukulandainathan, M. and Katsounaros, I. and Rassaei, L. and Burrows, A.D. and Raithby, P.R. and Marken, F. (2010) Electrocatalytic activity of BasoliteTM F300 metal-organic-framework structures. Electrochemistry Communications, 12. pp. 632-635. ISSN 1388-2481 GGomathipriya, P. and Basha, C.A. and Ramamurthi, V. (2010) Removal of Ni(II) from electroplating rinse waters using cation-exchange resins: batch and column studies. International Journal Environmental Engineering, 2 (4). ISSN 1756-8463 Gopalram, S.D. and Anbukulandainathan, M. and Ravi, G. (2010) On the study of pH effects in the microwave enhanced rapid synthesis of nano-ZnO. Applied Physics A, 99. pp. 197-203. Gopalram, S.D. and Anbukulandainathan, M. and Ravi, G. (2010) Short time and low temperature mineralization of ZnO nanorod-bunches from solution using cetyl trimethyl ammonium bromide. Super lattices and Microstructures, 48. pp. 126-132. HHelan, M. and Berchmans, L.J. and Zahirhussain, A. (2010) Synthesis of LiMn2O4 by molten salt technique. Ionics, 16. pp. 227-231. ISSN 0947-7047 IIlayaraja, N. and Noel, M. (2010) Galvanostatic and potentiostatic fluorination of 2-indanone, 1-indanone and 1,3-indandione in Et3N 4HF medium. Adsorption effects on yield and product selectivity. Journal of Electroanalytical Chemistry, 638. pp. 39-45. ISSN 1572-6657 Ilayaraja, N. and Radhakrishnan, S. and Renganathan, N.G. (2010) Electrochemical fluorination of dimethyl glutarate and its characterization. Ionics, 16. pp. 137-144. JJayaprakash, N. and Kalaiselvi, N. and Doh, C.H. and Babu, G. and Bhuvaneswari, D. (2010) A new class of Sol–gel derived LiM1xM2yMn22x2yO3.8F0.2 (M1 5 Cr, M2 5 V; x 5 y 5 0.2) cathodes for lithium batteries. Journal of Applied Electrochemistry, 40. pp. 2193-2202. ISSN 0021-891X Jeyabharathi, C. and Senthil Kumar, S. and Kiruthika, G.V.M. and Phani, K.L.N. (2010) Aqueous CTAB-Assisted Electrodeposition of Gold Atomic Clusters and Their Oxygen Reduction Electrocatalytic Activity in Acid Solutions. Electrocatalysis on Gold Clusters, 49. 2925 -2928. Jeyabharathi, C. and Venkateshkumar, P. and Mathiyarasu, J. and Phani, K.L.N. (2010) Carbon-Supported Palladium–Polypyrrole Nanocomposite for Oxygen Reduction and Its Tolerance to Methanol. Journal of the Electrochemical Society, 157 (11). B1740-B1745. ISSN 0013-4651 Jeyadheepan, K. and Palanichamy, P. and Swaminathan, V. and Jayachandran, M. and Sanjeeviraja, C. (2010) Thermal and optical properties of Cd2SnO4 thin films using photoacoustic spectroscopy. Applied Physics Letters, 98. pp. 919-925. ISSN 0003-6951 KKalaiselvi, N. and Manthiram, A. (2010) One-pot, glycine-assisted combustion synthesis and characterization of nanoporous LiFePO4/C composite cathodes for lithium-ion batteries. Journal of Power Sources, 195. pp. 2894-2899. Kamaraj, K. and Karpakam, V. and Sathiyanarayanan, S. and Venkatachari, G. (2010) Electrosynthesis of Polyaniline Film on AA 7075 Alloy and Its Corrosion Protection Ability. Journal of the Electrochemical Society, 157 (3). C102-C109. ISSN 0013-4651 Kamaraj, K. and Karpakam, V. and Sathiyanarayanan, S. and Venkatachari, G. (2010) Electrosysnthesis of poly(aniline-co-m-amino benzoic acid) for corrosion protection of steel. Materials Chemistry and Physics, 122. pp. 123-128. ISSN 0254-0584 Karthikeyan, N. and Giridhar, V.V. and Vasudevan , D. (2010) Surfactant effects on methanol oxidation at Pt–Ru/C coated glassy carbon electrode. Journal of Solid State Electrochemistry, 14. pp. 877-881. ISSN 1432-8488 Kiran, V. and Ravikumar, T. and Kalyanasundaram, N.T. and Krishnamurty, S. and Shukla, A.K. and Sampath, S. (2010) Electro-Oxidation of Borohydride on Rhodium, Iridium, and Rhodium–Iridium Bimetallic Nanoparticles with Implications to Direct Borohydride Fuel Cells. Journal of the Electrochemical Society, 157 (8). B1201-B1208. ISSN 0013-4651 Kulangiappar, K. and Anbukulandainathan, M. and Raju, T. (2010) Conversion of Benzylic Bromides to Benzaldehydes Using Sodium Nitrate As an Oxidant. Industrial Engineering & Chemical Research, 49. pp. 6670-6673. Kulkarni, B.S. and Sailaja, K. and Pal, S. (2010) Influence of plane wave cut-off on structural and electronic properties in Sn-BEA and Ti-BEA zeolite water molecule interaction. Chemical Physics Letters, 484. pp. 374-379. ISSN 0009-2614 Kumaravel, A. and Chandrasekaran, M. (2010) A novel nanosilver/nafion composite electrode for electrochemical sensing of methyl parathion and parathion. Journal of Electroanalytical Chemistry, 638. pp. 231-235. ISSN 1572-6657 LLee, K.M. and Chiu, W.H. and Wei, H.Y. and Hu, C.W. and Suryanarayanan, V. and Hsieh, W.F. and Ho, K.C. (2010) Effects of mesoscopic poly(3,4-ethylenedioxythiophene) films as counter electrodes for dye-sensitized solar cells. Thin Solid Films, 518. pp. 1716-1721. MMalathy, V. and Sivaranjani, S. and Vidhya, V.S. and Balasubramanian, T. and Josephprince, J. and Sanjeeviraja, C. and Jayachandran, M. (2010) Role of substrate temperature on the structural, optoelectronic and morphological properties of (400) oriented indium tin oxide thin films deposited using RF sputtering technique. Journal of Materials Scienc, 21. pp. 1299-1307. Manimaran, K. and Ananth, M.V. and Raju, M. and Renganathan, N.G. and Ganesan, M. (2010) Electrochemical investigations on cobalt-microencapsulated MmNi2.38Al0.82Co0.66Si0.77Fe0.13Mn0.24 hydrogen storage alloys for Ni–MH batteries. International Journal of Hydrogen Energy , 35. 4 6 3 0 -4 6 3 7. ISSN 0360-3199 Manivel, A. and Velayutham, D. and Noel, M. (2010) Voltammetric behavior of perfluorocarboxylic acids and their corresponding ethyl esters on glassy carbon electrode: surface effects. Ionics, 16. pp. 153-159. ISSN 0947-7047 Matheswaran, M. and Raju, T. (2010) Destruction of methylene blue by mediated electrolysis using two-phase system. Process Safety and Environmental Protection, 88. pp. 350-355. Mathiyarasu, J. and Nyholm, L. (2010) Voltammetric Determination of l-Dopa on Poly(3,4-ethylenedioxythiophene)-Single-Walled Carbon Nanotube Composite Modified Microelectrodes. Electroanalysis, 22 (4). 449 -454. ISSN 1040-0397 Meera, P. and Ramaiyan, K. and Kurungot, S. and Vijayamohanan, K.Pillai (2010) Bio-inspired catalyst compositions for enhanced oxygen reduction using nanostructured Pt electrocatalysts in polymer electrolyte fuel cells. Journal of Materials Chemistry, 20. pp. 9651-9657. Mohanapriya, S. and Bhat, S.D. and Sahu, A.K. and Manokaran, A. and Vijayakumar, R. and Pitchumani, S. and Sridhar, P. and Shukla , A.K. (2010) Sodium-alginate-based proton-exchange membranes as electrolytes for DMFCs. Energy & Environmental Science, 3. pp. 1746-1756. ISSN 0958-305X Mohanapriya, S. and Sridhar, P. and Pitchumani, S. and Shukla, A.K. (2010) Influence of Surface Pre-treatment of MWNTs Support on PEFC Performance. ECS Transactions, 28 (17). pp. 43-53. ISSN 1938-5862 Moses Ezhil Raj, A. and Som, T. and Jayachandran, M. and Sanjeeviraja, C. (2010) Defect engineering and opto electronic property modifications by 1.5MeV Li+ implantation on nano crystalline MgIn2O4 thin films. Radiation Effects & Defects in Solids: Incorporating Plasma Science & Plasma Technology, 165 (4). pp. 265-276. Murali, K.R. and Kala, S. and Elango, P. (2010) Characteristics of ZnS films pulse plated using non-aqueous electrolytes. Journal of Materials Science, 21. pp. 1293-1298. ISSN 0022-2461 Muralidharan, S. and Saraswathy, V. and Berchmans, L.J. and Thangavel, K. and Yong, K.A. (2010) Nickel ferrite (NiFe2O4): A possible candidate material as reference electrode for corrosion monitoring of steel in concrete environments. Sensors and Actuators B: Chemical, 145. pp. 225-231. ISSN 0925-4005 NNatesan, M. and Muralidharan, S. and Palaniswamy, N. (2010) Atmospheric Corrosion Performance of Engineering Materials in India. NACE International, 49 (8). Nathirabegum, S. and Basha, C.A. and Muralidharan, V.S. (2010) Role of Halides on the Passivation of Iron in Alkaline Buffer Solutions. Portugaliae Electrochimica Acta, 28 (3). pp. 143-151. ISSN 0872-1904 Neelavannan, M.G. and Basha, C.A. (2010) Ag–TiO2 doped photo catalytic degradation of Procion blue H-B dye in textile washwater. Toxicological & Environmental Chemistry, 92 (8). pp. 1423-1434. Nirmala, J.N. and Kumaravel, A. and Chandrasekaran, M. (2010) Stearic acid modified glassy carbon electrode for electrochemical sensing of parathion and methyl parathion. Journal of Applied Electrochemistry, 40. pp. 1571-1574. ISSN 0021-891X PParthiban, G.T. and Malarkodi, D. and Palaniswamy, N. and Venkatachari, G. (2010) Corrosion protection by acrylamide treatment for magnesium alloy metal matrix composite (MMC) reinforced with titanium boride. Surface Engineering, 26 (5). ISSN 0267-0844 Patchaiah, K. and Chellammal, S. and Palanichamy, S. and Subramanian, G. (2010) Artemisia pallens as corrosion inhibitor for mild steel in HCl medium. Materials Chemistry and Physics, 120. pp. 643-648. ISSN 0254-0584 Poongothai, N. and Ramachanderen, T. and Natesan, M. and Murugavel, S.G. (2010) Corrosion Inhibition of Mild Steel by Essential Oils in an HCl Environment. Materials Performance, 48 (9). Prabhakaran, D. and Basha, C.A. and Kannadasan, T. and Aravinthan, P. (2010) Removal of hydroquinone from water by electrocoagulation using flow cell and optimization by response surface methodology. Journal of Environmental Science and Health - Part A, 45. pp. 400-412. Prakash, A.S. and Manikandan, P. and Ramesha, K. and Sathiya, M. and Tarascon, J.M. and Shukla, A.K. (2010) Solution-Combustion Synthesized Nanocrystalline Li4Ti5O12 As High-Rate Performance Li-Ion Battery Anode. Chemistry of Materials, 22. pp. 2857-2863. ISSN 0897-4756 Premkumar, P. and Kannan, K. and Natesan, M. (2010) Effect of menthol coated craft paper on corrosion of copper in HCl environment. Bulletin of Materials Science, 33 (3). pp. 307-311. RRadhakrishnan, S. and Ganesan, M. and Renganathan, N.G. (2010) NMR studies on the composition of PVdF-HFP membrane for Li batteries. Ionics, 16. pp. 717-722. Raj, J.A. and Mathiyarasu, J. and Vedhi, C. and Manisankar, P. (2010) Electrochemical synthesis of nanosize polyaniline from aqueous surfactant solutions. Materials Letters, 64. pp. 895-897. ISSN 0167-577X Rajakumar, S. and Thirunakaran, R. and Sivashanmugam, A. and Gopukumar, S. (2010) Synthesis, Characterization, and Electrochemical Properties of LiCrxNiyMn2−x−yO4 Spinels as Cathode Material for 5 V Lithium Battery. Journal of the Electrochemical Society, 157 (3). A333-A339. ISSN 0013-4651 Rajasekar, A. and Anandkumar, B. and Maruthamuthu, S. and Ting, Y.P. and Rahman, P.K.S.M. (2010) Characterization of corrosive bacterial consortia isolated from petroleum-product-transporting pipelines. Applied Microbiology and Biotechnology, 85. pp. 1175-1188. ISSN 0175-7598 Ramaiyan, K. and Pradnya, P. A. and Thangavelu, P. and Sreekumar , K. and Ulhas, K.K. and Vijayamohanan, K.Pillai (2010) Artificially Designed Membranes Using Phosphonated Multiwall Carbon Nanotube-Polybenzimidazole Composites for Polymer Electrolyte Fuel Cells. Journal of Physics Chemistry Letters. pp. 2009-2013. ISSN 1948-7185 Rameshbabu, B. and Seenimeera, K. and Venkatesan, P. and Sunandha, D. (2010) Removal of Fatty Acids from Palm Oil Effluent by Combined Electro-Fenton and Biological Oxidation Process. Water Air Soil Pollution, 211. Council of Scientific and Industrial Research (2010) A Process for the removal of corrosion products on tin and tin alloy surfaces by electrolytic cleaning using natural seawater. 243892. Rekha, S. and Srinivasan, K.N. and John, S. (2010) Electroless deposition of copper from methane sulphonate complexed bath. Transactions of the Institute of Metal Finishing, 88 (4). ISSN 0020-2967 Council of Scientific and Industrial Research (2010) A process for the preparation of highly pure manganse sulphate electrolyte useful for electrodeposition of highly pure electrolytic manganese dioxide(HPEMD"). 243686. SSamir, O.M. and Madhu, S. and Somashekar, R. (2010) X-ray Diffraction Analysis of Yemeni Cotton Fibers. Fibers and Polymers, 11 (3). pp. 413-421. ISSN 1229-9197 Samsonnesaraj, A. and Arulraj, I. and Pattabiraman, R. (2010) Preparation and Characterization of Ceria-Based Electrolytes for Intermediate Temperature Solid Oxide Fuel Cells (IT-SOFC). Journal of Iranian Chemical Society, 7 (3). 564-584.. Saravanan, G. and Mohan, S. (2010) Structure, current efficiency, and corrosion properties of brush electrodeposited (BED) Cr from Cr(III)dimethyl formamide (DMF)-bath. Journal of Applied Electrochemistry, 40. pp. 1-6. ISSN 0021-891X Sathiyanarayanan, S. and Karpakam, V. and Kamaraj, K. and Muthukrishnan, S. and Venkatachari, G. (2010) Sulphonate doped polyaniline containing coatings for corrosion protection of iron. Surface & Coatings Technology, 204. pp. 1426-1431. ISSN 0257-8972 Sekar, R. and Eagammai, C. and Sobha , J. (2010) Effect of additives on electrodeposition of tin and its structural and corrosion behaviour. Journal of Applied Electrochemistry, 40. pp. 49-57. ISSN 0021-891X Sekhar De, H. and Sailaja, K. and Pal, S. (2010) Understanding the Reactivity Properties of Aun (6 e n e 13) Clusters Using Density Functional Theory Based Reactivity Descriptors. Journal of Physical Chemistry B, 114. pp. 6690-6703. ISSN 1520-6106 Selvakumar, K.V. and Basha, C.A. and Prabhu, H.J. and Kalaichelvi, P. and Nelliyan, S. (2010) The potential of free cells of Pseudomonas aeruginosa on textile dye degradation. Bioresource Technology, 101. pp. 2678-2684. ISSN 0960-8524 Selvakumar, K.V. and Basha, C.A. and Prabhu, H.J. and Narayanan, A. and Nagarajan, J. (2010) Electro Oxidation and Biodegradation of Textile Dye Effluent Containing Procion Blue 2G Using Fungal Strain Phanerochate Chrysosporium MTCC 787. International Journal of Chemical Reactor Engineering, 8 (A147). ISSN 1542-6580 Selvakumar, M. and Pitchumani, S. (2010) Hybrid supercapacitor based on poly(aniline-co-m-anilicacid) and activated carbon in non-aqueous electrolyte. Korean Journal of Chemical Engineering, 27 (3). pp. 977-982. Selvam, M. (2010) Electroless silver deposition on ABS plastic using Co(II) as reducing agent. Transactions of the Institute of Metal Finishing, 88 (4). ISSN 0020-2967 Selvaraj, M. and Maruthan, K. and Palraj, S. and Venkatachari, G. (2010) Preparation and characterization of thermally stable epoxy-titanate coatings. Progress in Organic Coatings, 67. pp. 339-347. ISSN 0021-8995 Selvaraj, M. and Palraj, S. and Maruthan, K. and Rajagopal, G. and Venkatachari, G. (2010) Synthesis and Characterization of Polypyrrole Composites for Corrosion Protection of Steel. Journal of Applied Polymer Science, 116. pp. 1524-1537. ISSN 0021-8995 Senthil Kumar, R. and Kulangiappar, K. and Anbukulandainathan, M. (2010) Convenient electrochemical method for the synthesis of a-bromo alkyl aryl ketones. Synthetic Communications, 40. pp. 1736-1742. ISSN 0039-7911 Senthilkumar, V. and Vickraman, P. and Jayachandran, M. and Sanjeeviraja, C. (2010) Structural and electrical studies of nano structured Sn12x SbxO2(x 5 0.0, 1, 2.5, 4.5 and 7 at%) prepared by co-precipitation method. Journal of Materials Science: Materials in Electronics, 21. pp. 343-348. ISSN 0957-4522 Senthilkumar, V. and Vickraman, P. and Joseph Prince, J. and Jayachandran, M. and Sanjeeviraja, C. (2010) Effects of annealing temperature on structural, optical, and electrical properties of antimony-doped tin oxide thin films. Philosophical Magazine Letters, 90 (5). pp. 337-347. ISSN 0950-0839 Senthilkumar, V. and Vickraman, P. and Ravikumar, R. (2010) Synthesis of fluorine doped tin oxide nanoparticles by sol–gel technique and their characterization. Journal of Sol-Jel Science Technology, 53. pp. 316-321. ISSN 0928-0707 Sivaramamoorthy, K. and Bahadur, S.A. and Kottaisamy, M. and Murali, K.R. (2010) Structural, optical and photoconductive properties of electron beam evaporated CdSxSe1-x films. Crystal Research and Technology, 45 (4). 414 -420. ISSN 0232-1300 Sreekuttan, M.U. and Vishal, M.D. and Vijayamohanan, K.Pillai and Sreekumar, K. (2010) High Pt Utilization Electrodes for Polymer Electrolyte Membrane Fuel Cells by Dispersing Pt Particles Formed by a Preprecipitation Method on carbon “Polished” with Polypyrrole. Journal of Physical Chemistry C, 114 (34). pp. 14654-14661. ISSN 1932-7447 Sridevikumari, T. and Premkumar, T. (2010) Synthesis of macroporous LiMn2O4 with avian egg membrane as a template. Ionics, 16. pp. 61-66. ISSN 0947-7047 Srinivasan, K.N. and Meenakshi, R. and Santhi, A. and Thangavelu, P.R. and John, S. (2010) Studies on development of electroless Ni–B bath for corrosion resistance and wear resistance applications. Surface Engineering, 26 (3). ISSN 0267-0844 Suryanarayanan, V. and Noel, M. (2010) A comparative evaluation on the voltammetric behavior of boron-doped diamond (BDD) and glassy carbon (GC) electrodes in different electrolyte media. Journal of Electroanalytical Chemistry, 642. pp. 69-74. Suryanarayanan, V. and Wu, C.T. and Ho, K.C. (2010) Molecularly Imprinted Electrochemical Sensors. Electroanalysis, 22 (16). pp. 1795-1811. ISSN 1040-0397 Syedabuthahir, K.A.Z. and Jagannathan, R. (2010) Reverse-loop impedance profile in Bi2S3 quantum dots. Materials Chemistry and Physics, 121. pp. 184-192. ISSN 0254-0584 Syedbasheerahamed, M.S. and Balu, A.R. and Nagarethinam, V.S. and Thayumanavan, A. and Murali, K.R. and Sanjeeviraja, C. and Jayachandran, M. (2010) Structural, optical, and electrical properties of electron beam evaporated CdSe thin films. Crystal Research and Technology, 45 (4). 387 -392. ISSN 0232-1300 TThangavel, K. and Muralidharan, S. and Saraswathy, V. and Ann, K.Y. and Balamurugan, L. (2010) Relationship between Alumina and Chloride content on their physical and corrosion resistance properties of concrete. The Arabian Journal for Science and Engineering, 35 (2B). ISSN 1319-8025 Tintula, K.K. and Pitchumani, S. and Sridhar, P. and Shukla, A.K. (2010) PEDOT–PSSA as an alternative support for Pt electrodes in PEFCs. Bulletin of Materials Science, 33 (2). pp. 157-163. ISSN 0250-4707 Tintula, K.K. and Pitchumani, S. and Sridhar, P. and Shukla, A.K. (2010) A solid-polymer-electrolyte direct methanol fuel cell (DMFC) with Pt–Ru nanoparticles supported onto poly(3,4-ethylenedioxythiophene) and polystyrene sulphonic acid polymer composite as anode. Journal of Chemistry and Science, 122 (3). pp. 381-389. Tintula, K.K. and Sahu, A.K. and Shahid, A. and Pitchumani, S. and Sridhar, P. and Shukla, A.K. (2010) Mesoporous Carbon and Poly(3,4-ethylenedioxythiophene) Composite as Catalyst Support for Polymer Electrolyte Fuel Cells. Journal of the Electrochemical Society, 157 (11). B1679-B1685. ISSN 0013-4651 VVasudevan, D. (2010) The effect of cathode materials on the electrochemical reduction of nitric acid. Polish Journal of Chemical Technology, 12 (1). pp. 35-37. Vasudevan, S. and Epron, F. and Lakshmi, J. and Ravichandran, S. and Mohan-, S. and Sozhan, G. (2010) Removal of NO3– from Drinking Water by Electrocoagulation – An Alternate Approach. Clean – Soil, Air, Water, 38 (3). pp. 225-229. ISSN 1863-0650 Vasudevan, S. and Lakshmi, J. and Sozhan, G. (2010) Studies Relating to Removal of Arsenate by Electrochemical Coagulation: Optimization, Kinetics, Coagulant Characterization. Separation Science and Technology, 45. pp. 1313-1325. ISSN 0149-6395 Vasudevan, S. and Lakshmi, J. and Sozhan, G. (2010) Studies on the Removal of Arsenate by Electrochemical Coagulation Using Aluminum Alloy Anode. Clean – Soil, Air, Water, 38 (5-6). pp. 506-515. ISSN 1863-0650 Vasudevan, S. and Lakshmi, J. and Vanathi, R. (2010) Electrochemical Coagulation for Chromium Removal: Process Optimization, Kinetics, Isotherms and Sludge Characterization. Clean, 38 (1). 9 -16. Vasudevan, S. and Sheela, S.M. and Lakshmi, J. and Sozhan, G. (2010) Optimization of the process parameters for the removal of boron from drinking water by electrocoagulation – a clean technology. Journal of Chemical Technology and Biotechnology, 85. pp. 926-933. ISSN 0268-2575 Vedalakshmi, R. and Balamurugan, L. and Saraswathy, V. and Kim, S.H. and Ann, K.Y. (2010) Reliability of Galvanostatic Pulse Technique in Assessing the Corrosion Rate of Rebar in Concrete Structures: Laboratory vs Field Studies. Korean Society of Chemical Engineering Journal of Civil Engineering, 14 (6). pp. 867-877. Vedalakshmi, R. and Palaniswamy, N. (2010) Analysis of the electrochemical phenomenon at the rebar–concrete interface using the electrochemical impedance spectroscopic technique. Magazine of Concrete Research, 62 (3). pp. 177-189. ISSN 0024-9831 Vijayabarathi, T. and Vijayarani, K. and Noel, M. (2010) Evaluation of Porous Nickel Hydroxide Electrode for the Oxidation of aliphatic and aromatic primary alchohols. Indian Journal of Chemical Technology, 17. pp. 411-418. Vijayalakshmi, A. and Karthikeyan, R. and Sheela, B. (2010) Nonenzymatic Reduction of Hydrogen Peroxide Produced during the Bioelectrocatalysis of Glucose Oxidase on Urchin-like Nanofibrillar Structures of Cu on Au Substrates. Journal of Physics and Chemistry, 114. pp. 22159-22164. Vinod Selvaganesh, S. and Selvarani, G. and Sridhar, P. and Pitchumani, S. and Shukla, A.K. (2010) A Durable PEFC with Carbon-Supported Pt–TiO2 Cathode: A Cause and Effect Study. Journal of the Electrochemical Society, 157 (7). B1000-B1007. ISSN 0013-4651 |