A

Anandaraj, T. and Mohan, P.S. and Krishnan, S.M. and Raghavan, M. (2001) Interpenerating polymer networks for coatings - properties, characterisation, application and current status. Paint India, 51 (04). pp. 43-54.

Ananth, M.V. and Parthasarathy, N.V. (1998) Electron microscope observations on electrolytic Ni-Mo-Fe coatings. Transactions of the Institute of Metal Finishing, 76 (01). pp. 35-38. ISSN 0020-2967

Ananth, M.V. and Parthasarathy, N.V. (1990) Influence of plating variables on the electrocatalytic behavior of Ni-Mn electrocoated cathodes for alkaline water electrolysis. Bulletin of Electrochemistry, 06 (01). pp. 40-41.

Azim, S.S. and Guruviah, S. (1986) Organic coating by electropolymerization of 0-cresol. Bulletin of Electrochemistry , 2 (4). pp. 353-355. ISSN 0256-1654

B

Balaji, R. and Pushpavanam, M. (2003) Methanesulphonic acid in electroplating related metal finishing industries. Transactions of the Institute of Metal Finishing, 81 (05). pp. 154-158. ISSN 0020-2967

Balaji, R. and Pushpavanam, M. and Yogeshkumar, K. and Subramanian, K. (2006) Electrodeposition of Copper-Tin-Ptfe composite coatings. Indian Surface Finishing, 3 (3-4). pp. 381-391. ISSN 0972-9364

Balaji, R. and Pushpavanam, M. and Yogeshkumar, K. and Subramanian, K. (2006) Electrodeposition of bronze–PTFE composite coatings and study on their tribological characteristics. Surface & Coatings Technology, 201 (6). pp. 3205-3211. ISSN 0257-8972

Balasubramanian, A. and Srikumar, D.S. and Raja, G. and Saravanan, G. and Mohan, S. (2009) Effect of pulse parameter on pulsed electrodeposition of copper on stainless steel. Surface Engineering, 25 (5). pp. 389-392. ISSN 0267-0844

Byun, H.Y. and Vittal, R. and Kim, D.Y. and Kim, K.J. (2004) Beneficial Role of Cetyltrimethylammonium Bromide in the Enhancement of Photovoltaic Properties of Dye-Sensitized Rutile TiO2 Solar Cells. Langmuir, 20 (16). pp. 6853-6857. ISSN 0743-7463

C

Chandran, K. and Sriveeraraghavan, S. and Krishnan, R.M. and Natarajan, S.R. and Guruviah, S. (1986) Evaluation of. Performance of electroplated cu-ni-cr and double layer ni-cr coatings on mild steel. Bulletin of Electrochemistry , 2 (5). pp. 457-459. ISSN 0256-1654

Chandran, M. and Lekshmanasarma, R. and Krishnan, R.M. (1999) Zinc electrodeposition from bromide electrolytes effect of additives. Bulletin of Electrochemistry , 15 (7-8). pp. 242-247. ISSN 0256-1654

Chandran, M. and Sarma, R.L. and Krishnan, R.M. (2003) Characteristics of non-cyanide acid zinc plating baths and coatings. Transactions of the Institute of Metal Finishing, 81 (06). pp. 207-209. ISSN 0020-2967

Chandran, M. and Sharma, R.L. and Krishnan, R.M. (2001) Electrodeposition of zinc from bromide-based electrolytes. Plating and Surface Finishing, 88 (04). pp. 74-77. ISSN 0360-3164

Chandrasekar, M.S. and Pushpavanam, M. (2008) Pulse and pulse reverse plating—Conceptual,advantages and applications. Electrochimica Acta, 53 (8). pp. 3313-3322.

Chandrasekar, M.S. and Shanmugaigamani, S. and Malathy, P. (2010) Structural and textural study of electrodeposited zinc from alkaline non-cyanide electrolyte. Journal of Materials Science, 45. pp. 1160-1169. ISSN 0022-2461

Chandrasekar, M.S. and Shanmugasigamani, S. and Malathy, P. (2009) Morphology and texture of pulse plated zinc–cobalt alloy. Materials Chemistry and Physics, 115 (2-3). pp. 603-611. ISSN 0254-0584

Chandrasekar, M.S. and Shanmugasigamani, S. and Malathy, P. (2009) Properties of Zinc alloy electrodeposits produced from acid and alkaline electrolytes. Journal of Solid State Electrochemistry, 13 (5). pp. 781-789. ISSN 1432-8488

Chandrasekar, M.S. and Shanmugasigamani, S. and Pushpavanam, M. (2010) Synergetic effects of pulse constraints and additives in electrodeposition of nano-crystalline zinc:Corrosion,structural and textural characterization. Materials Chemistry and Physics, 124. pp. 516-528.

Chandrasekaran, P. and Subramanian, G. and Ananth, V. and Palraj, S. and Krishnan, R.M. and Guruviah, S. (1990) Performance of electrodeposited zinc on steel in biologically active environment. Bulletin of Electrochemistry, 06 (04). pp. 395-396. ISSN 0256-1654

D

Council of Scientific and Industrial Research (1966) Improvements in or Relating to sharpening of Razor Blades. 95419.

Council of Scientific and Industrial Research (1966) Improvements in and relating to device for the sharpening of razor blades. 98148.

Devaraj, G. and Rameshbapu, G.N.K. and Ayyapparaju, J. (1992) Electro deposited composites – a review on new technologies for aerospace and other field. Bulletin of Electrochemistry, 08 (08). pp. 390-392. ISSN 0256-1654

G

Gomathi Priya, P. and Basha, C.A. and Ramamurthi, V. and Nathira Begum, S. (2009) Recovery and reuse of Ni(II) from rinse water of electroplating industries. Journal of Hazardous Materials, 163 (2-3). pp. 899-909. ISSN 0304-3894

Gomathipriya, P. and Basha, C.A. and Ramamurthi, V. (2010) Removal of Ni(II) from electroplating rinse waters using cation-exchange resins: batch and column studies. International Journal Environmental Engineering, 2 (4). ISSN 1756-8463

Council of Scientific and Industrial Research (1969) Improvements in or relating to the electrochemical marking on metals. 111691.

Council of Scientific and Industrial Research (1970) Improvements in or relating to electrode holder for the electrochemical marking of metals. 118016.

Council of Scientific and Industrial Research (1970) Improvements in or relating to electrolytes for the electrochemical marking on metals. 118256.

Council of Scientific and Industrial Research (1975) The transfer of letters/number/design on to a metal by electrochemical techniques. 137859.

Council of Scientific and Industrial Research (1973) Improvements in or relating to the electrochemical marking on metals. 131636.

Council of Scientific and Industrial Research (1973) Electrodeposition of shellac from aqueous systems. 130472.

Council of Scientific and Industrial Research (1991) Improvements in or relating to the process for the preparation of anti-tarnishing lacquer for copper and its alloys. 168455.

H

Harikrishnan, K. and John, S. and Srinivasan, K.N. and Praveen, J. and Ganesan, M. and Kavimani, P.M. (2006) An Overall Aspect of Electroless Ni-P Depositions—A Review Article. Metallurgical and Materials Transactions A, 37 (6). pp. 1917-1926. ISSN 1073-5623

I

Ilayaraja, M. and Mohan, S. and Gnanamuthu, R.M. and Saravanan, G. (2009) Nanocrystalline zinc–nickel alloy deposition using pulse electrodeposition (PED) technique. Transactions of the Institute of Metal Finishing, 87 (3). pp. 145-148. ISSN 0020-2967

J

Jayakrishnan, S. and Dhayanand, K. and Krishnan, R.M. and Sekar, R. and Sriveeraraghavan, S. (1998) Metal distribution in electroplating of nickel and chromium. Transactions of the Institute of Metal Finishing, 76 (03). pp. 90-93. ISSN 0020-2967

Jayakrishnan, S. and Elizabeth, P. and Krishnan, R.M. and Sriveeraraghavan, S. and Natarajan, S.R. (1997) Zinc electrodeposits from sulfamate solutions and their chromating treatment. Metal Finishing, 95 (01). pp. 20-25. ISSN 0026-0576

Jayakumar, N.D. and Devaraj, G. and Rameshbapu, G.N.K. (1988) Electrodeposition of zinc-iron alloy. Bulletin of Electrochemistry , 04 (08). pp. 711-715. ISSN 0256-1654

Jeyasree, G. and Subramanian, A. and Vasudevan, T. and Mohan, S. and Venkatachalam, R. (2000) Electropolishing of stainless steel. Bulletin of Electrochemistry , 16 (9). pp. 338-391. ISSN 0256-1654

Jha, N.S. and Satyendra , M. and Mamidi, S. and Ashalatha, S. and Archita , M. and Jha, S.K. and Avadhesha , S. (2016) Targeting human telomeric G-quadruplex DNA with curcumin and its synthesized analogues under molecular crowding conditions. RSC Advances, 6. pp. 7474-7487. ISSN 2046-2069

John, S. (1997) Electrodeposition of nickel black solar absorber coatings. Metal Finishing, 95 (06). pp. 84-86. ISSN 0026-0576

John, S. (1998) Electroforming. Transactions of the Metal Finishers Association of India, 07 (02). pp. 131-140.

John, S. and Amusdurai, M.S. and Shanmugam, N.V. and Raghavan, M. and Vasu, K.I. (1990) Characteristics of low concentrated nickel sulphamate electrolyte for electroforming applications. Bulletin of Electrochemistry, 06 (02). p. 244. ISSN 0256-1654

John, S. and Ananth, V. and Vasudevan, T. (1999) Improving the deposit distribution during electroforming of complicated shapes. Bulletin of Electrochemistry , 15 (5-6). pp. 202-204. ISSN 0256-1654

John, S. and Balasubramanian, V. (1986) Integral colour anodising of aluminium using alternating current. Bulletin of Electrochemistry , 2 (5). pp. 461-463. ISSN 0256-1654

John, S. and Balasubramanian, V. and Shanmugam, N.V. and Selvam, M. and Srinivasan, K.N. and Shenoi, B.A. (1986) Blackening of aluminium-zinc (galvalume) coatings for solar energy utilization. Energy Conversion Management , 26 (3/4). pp. 317-320. ISSN 0196-8904

John, S. and Karuppiah, N. and Natarajan, S. and Sivan, V. (2002) Characterization of electrodeposited Nickel-Cobalt selective black coating using electron probe micro analysis. Bulletin of Electrochemistry , 18 (7). pp. 299-304. ISSN 0256-1654

John, S. and Pushpavanam, M. and Shenoi, B.A. (1985) Studies on post-treatment of gold plated silver. Bulletin of Electrochemistry , 01 (02). pp. 129-130. ISSN 0256-1654

John, S. and Selvam, M. Lead plating of aluminium connectors for batteries. In: Indian Lead Zinc Information Centre silver jubilee conference.

John, S. and Selvam, M. and Srinivasan, K.N. and Shanmugam, N.V. and Shenoi, B.A. (1984) Nickel-cadmium black coating for solar energy utilization. Metal Finishing (April). pp. 75-80. ISSN 0026-0576

John, S. and Shanmugam, N.V. and Srinivasan, K.N. and Selvam, M. (1989) Improving the metal distribution of nickel plating solutions. Bulletin of Electrochemistry, 05 (06). pp. 440-442. ISSN 0256-1654

John, S. and Shanmugam, N.V. and Srinivasan, K.N. and Selvam, M. (1985) A survey of selective coatings for solar collectors. Indian Chemical Engineer, 27 (4). 01-05. ISSN 0019-4506

John, S. and Shanmugam, N.V. and Srinivasan, K.N. and Selvam, M. and Shenoi, B.A. (1983) Blackening of electroless nickel deposits for solar energy applications. Surface Technology, 20 (04). pp. 331-338. ISSN 0376-4583

John, S. and Shanmugam, N.V. and Srinivasan, K.N. and Selvam, M. and Shenoi, B.A. (1982) Electroplated tin-nickel alloy as a mandrel surface for electroforming of copper foils. Journal of Electrochemical Society of India, 31 (01). pp. 32-34.

John, S. and Silaimani, S.M. and Anand, V. and Vasudevan, T. (2002) Zinc-Manganese alloy plating - a critical review. Bulletin of Electrochemistry , 18 (9). pp. 407-412. ISSN 0256-1654

John, S. and Srinivasan, K.N. and Kavimani, P.M. and Harikrishnan, K. and Praveen, J. and Ganesan, M. (2005) Electroless Ni-P-Ti0,-Based Com~osite coatings for surface finishing applications. Plating and Surface Finishing. pp. 62-66.

John, S. and Srinivasan, K.N. and Thangavelu, P.R. and Shanmugam, N.V. and Selvam, M. (2000) Galvanic cell for the production of solar absorber coatings. Transactions of the Metal Finishers Association of India, 09 (01). pp. 13-17.

John, S. and Thangavelu, P.R. and Shanmugam, N.V. and Guruviah, S. and Vasu, K.I. (1990) Deposition of zinc-cobalt alloy as an undercoat to selective black coatings for solar collectors. Bulletin of Electrochemistry, 06 (05). pp. 505-506. ISSN 0256-1654

John, S. and Thangavelu, P.R. and Shanmugam, N.V. and Vasu, K.I. (1990) Electrodeposition of chromium-nickel coating for photo thermal conversion of solar energy. Bulletin of Electrochemistry, 06 (02). p. 250. ISSN 0256-1654

John, S. and Thangavelu, P.R. and Shanmugam, N.V. and Veeramani, P. and Srinivasan, K.N. and Raghavan, M. (1998) Electrofabrication process for the manufacture of complex structures. Transactions of the Indian Institute of Metals, 51 (05). pp. 449-450. ISSN 0972-2815

Johnrathinam, A. and Rameshbapu, G.N.K. and Muralidharan, V.S. (2002) Effect of organic additives on electrodeposition and dissolution of zinc from zincate solutions. Transactions of the SAEST, 37 (03). pp. 149-151.

Josephkennedy, C. and Aruna, A. and Krishnan, R.M. and Sobha , J. and Sriveeraraghavan, S. and Natarajan, S.R. (1996) Influence of potassium iodate on chromium deposition. Bulletin of Electrochemistry, 12 (5-6). pp. 283-287. ISSN 0256-1654

Jung, K.H. and Hong, J.S. and Vittal, R. and Kim, K.J. (2002) Enhanced photocurrent of Dye-Sensitized Solar cells by modification of TiO2 with carbon nanotubes. Chemistry Letters. pp. 864-865. ISSN 0366-7022

K

Kaleesh Kumar, M. and Vishnu Prataap, R.K. and Mohan, S. and Jha, S.K. (2016) Preparation of electro-reduced graphene oxide supported walnut shape nickel nanostructures, and their application to selective detection of dopamine. Microchimica Acta, 183. pp. 1759-1768. ISSN 0026-3672

Kanagaraj, D. and Lakshminarasimhan, V. and Iyer, S.V.K. (1996) Anodising of aluminium in sulphamic acid electrolyte. Bulletin of Electrochemistry, 12 (05). pp. 288-290. ISSN 0256-1654

Kanagaraj, D. and Narasimhan, V.L. (1986) Electrolyte for aluminium electrolytic capacitor. Bulletin of Electrochemistry , 2 (3). pp. 281-282. ISSN 0256-1654

Kanagaraj, D. and Narasimhan, V.L. and Iyer, S.V. (1996) Anodising of aluminium in sulphamic acid electrolyte. Bulletin of Electrochemistry, 12 (5-6). pp. 288-290. ISSN 0256-1654

Kanagaraj, D. and Narasimhan, V.L. and Vincent, S. and Chandrasekaran, S. and Birlasekaran, S. (1986) Pulse anodising using microprocessor controlled pulse unit. Bulletin of Electrochemistry , 2 (6). pp. 597-600. ISSN 0256-1654

Kanagaraj, D. and Raj, V. and Vincent, S. and Prasannakumar, B. and Senthilkumar, A. and Iyer, S.V.K. (2001) Pulse anodizing on AA1100 aluminium alloy in oxalic acid electrolyte. Bulletin of Electrochemistry , 17 (6). pp. 285-288. ISSN 0256-1654

Kanakaraj, D. and Venkatachalam, R. and Narasimhan, V.L. and Subramanian, R. (1986) Plating on anodised aluminium. Bulletin of Electrochemistry , 2 (3). pp. 273-275. ISSN 0256-1654

Karthikeyan, S. and Jeeva, P.A. and Arivazhagan, N. and Umasankar, V. and Srinivasan, K.N. and Paramasivam, M. (2013) Wear, hardness and corrosion resistance characteristics of tungsten sulfide incorporated electroless Ni-P coatings. Procedia Engineering, 64. pp. 720-726.

Karthikeyan, S. and Srinivasan, K.N. and Vasudevan, T. and Gopalan, A. and Paruthimalkalaignan, G. and John, S. (2001) Characterization of electrolessly deposited nickel-phosphorous-silicon carbide composite coatings. Bulletin of Electrochemistry , 17 (3). pp. 127-130. ISSN 0256-1654

Karuppiah, N. and John, S. (2000) Characterization of electrodeposited nickel-cobalt based selective coatings for solar thermal energy conversion. Bulletin of Electrochemistry , 16 (2). pp. 71-74. ISSN 0256-1654

Karuppiah, N. and John, S. and Natarajan, S. and Sivan, V. (2002) Characterization of electrodeposited Nickel-Cobalt selective black coatings - scanning electron microscopic studies. Bulletin of Electrochemistry , 18 (7). pp. 295-298. ISSN 0256-1654

Karuppiah, N. and Srinivasan, K.N. and Selvam, M. (1996) Electroless Nickel Film Resistors for electronic industry. Bulletin of Electrochemistry, 12 (5-6). pp. 266-269. ISSN 0256-1654

Kennedy, C.J. and Aruna, A. and Krishnan, R.M. and Sobha , J. and Sriveeraraghavan, S. and Natarajan, S.R. (1996) Influence of potassium iodate on chromium deposition. Bulletin of Electrochemistry, 12 (05). pp. 283-287. ISSN 0256-1654

Kokila, P. and Lekshmanasarma, R. and Sriveeraraghavan, S. (2000) Hull cell studies on copper electrodeposition from sulphamate bath. Bulletin of Electrochemistry, 16 (08). pp. 363-366. ISSN 0256-1654

Krishnan, R.M. and Eleankovan, T. and Aruna, A. and Sriveeraraghavan, S. and Sobha , J. and Natarajan, S.R. (1996) Effect of organic acids in nickel plating. Bulletin of Electrochemistry, 12 (5-6). pp. 270-273. ISSN 0256-1654

Krishnan, R.M. and Eleankovan, T. and Aruna, A. and Sriveeraraghavan, S. and Sobha , J. and Natarajan, S.R. (1996) Effect of organic acids in nickel plating. Bulletin of Electrochemistry, 12 (05). pp. 270-273. ISSN 0256-1654

Krishnan, R.M. and Kala, C. (2001) Corrosion resistance behaviour of hard chromium coatings with Zinc undercoat. Bulletin of Electrochemistry , 17 (1). 06-09. ISSN 0256-1654

Krishnan, R.M. and Muralidharan, V.S. (1990) Cyclic voltammetric studies on zinc(II), NTA complexes on glassy carbon electrodes. Bulletin of Electrochemistry, 06 (01). pp. 160-162. ISSN 0256-1654

Krishnan, R.M. and Muralidharan, V.S. and Natarajan, S.R. (1996) A Non-cyanide brass plating bath. Bulletin of Electrochemistry, 12 (05). pp. 274-277. ISSN 0256-1654

Krishnan, R.M. and Muralidharan, V.S. and Natarajan, S.R. (1996) A non-cyanide brass plating bath. Bulletin of Electrochemistry, 12 (5-6). pp. 274-277. ISSN 0256-1654

Krishnan, R.M. and Muthumeenal, V. and Muralidharan, V.S. and Natarajan, S.R. (1990) A non-cyanide copper plating electrolyte for direct plating on mild steel. Bulletin of Electrochemistry, 06 (11). pp. 870-872. ISSN 0256-1654

Krishnan, R.M. and Parthasarathy, N.V. and Natarajan, S.R. (1986) Electrodeposition of black chromium from self regulating electrolytes. Bulletin of Electrochemistry , 2 (3). pp. 243-246. ISSN 0256-1654

Krishnan, R.M. and Ramakrishnan, A. and Sobha , J. and Sriveeraraghavan, S. and Kannan, N. and Natarajan, S.R. (1996) Studies of chromium plating from low concentration electrolytes. Bulletin of Electrochemistry, 12 (5-6). pp. 278-282. ISSN 0256-1654

Krishnan, R.M. and Ramakrishnan, A. and Sobha , J. and Sriveeraraghavan, S. and Kannan, N. and Natarajan, S.R. (1996) Studies of chromium plating from low concentration electrolytes. Bulletin of Electrochemistry, 12 (05). pp. 278-282. ISSN 0256-1654

Krishnan, R.M. and Sriveeraraghavan, S. and Deenadayalan, M. and Sobha , J. and Sekar, R. and Jayachandran, P. (2000) Electrodeposition of silver from low concentrated cyanide electrolytes. Bulletin of Electrochemistry , 16 (3). pp. 136-139. ISSN 0256-1654

Krishnan, R.M. and Sriveeraraghavan, S. and Natarajan, S.R. (1986) Thiosulphate baths for silver plating. Bulletin of Electrochemistry , 2 (3). pp. 257-260. ISSN 0256-1654

Krishnan, R.M. and Sriveeraraghavan, S. and Sobha , J. and Josephkennedy, C. and Sekar, R. and Baby, N. (1999) Effect of trivalent iron and trivalent chromium ions on chromium plating. Bulletin of Electrochemistry , 15 (5-6). pp. 195-198. ISSN 0256-1654

Krishnan, R.M. and Sriveeraraghavan, S. and Sobha , J. and Kennedy, C.J. and Sekar, R. and Mary, J.G. (1999) Effect of various sulphates on chromium plating. Bulletin of Electrochemistry , 15 (7-8). pp. 233-237. ISSN 0256-1654

L

Lehman, E.B. and Bonarski, K. and Swiatek, Z. and Rameshbapu, G.N.K. (1999) Textural aspects of electrodeposition processes. Bulletin of Electrochemistry , 15 (5-6). pp. 189-191. ISSN 0256-1654

M

Malathy, P. (2000) Critical review on alloy plating: A viable alternative to conventional plating. Bulletin of Electrochemistry , 16 (12). pp. 559-566. ISSN 0256-1654

Malathy, P. and Manikandan, H. and Ramanathan, K. (2007) Preparation and characterization of nickel–cobalt-diamond electro-composites by sediment co-deposition. Surface & Coatings Technology, 201. pp. 6372-6379. ISSN 0257-8972

Malathy, P. and Natarajan, S.R. (1991) Platinum plated titanium for industrial electrolyses. Bulletin of Electrochemistry, 7 (7). pp. 309-311. ISSN 0256-1654

Malathy, P. and Sobha , J. and Natarajan, S.R. (1991) Semibright nickel undercoats on the corrosion performance of bright nickel-iron-chromium deposits. Bulletin of Electrochemistry, 7 (6). pp. 266-268. ISSN 0256-1654

Malathy, P. and Vijayanthy, . (1999) Electrodeposition of Ni-Fe-P Alloy. Bulletin of Electrochemistry , 15 (5-6). pp. 211-214. ISSN 0256-1654

Manu, R. and Shoba, J. (2009) Influence of Additives and the Effect of Aging in Modifying Surface Topography of Electrodeposited Copper. Journal of the Electrochemical Society, 456 (7). pp. 215-221. ISSN 0013-4651

Mayelerinathan, B. and Rameshbapu, G.N.K. (2002) Effect of urea derivatives on alkaline zinc plating solutions. Transactions of the SAEST, 37 (03). pp. 119-122.

Meyyappan, R.M. and Ramachandran, P. and Venkateswaran, K.V. and Srinivasan, R. (1986) Catalytic anodes in electrowinning - inhibition of poisoning by manganese ions: Part II. Galvanic studies. Bulletin of Electrochemistry , 2 (6). pp. 643-645. ISSN 0256-1654

Michael, M.S. and Malathy, P. and Subramanian, G. and Balakrishnan, K. (1999) Corrosion resistance of electrodeposited zinc alloys: A marine exposure study. Bulletin of Electrochemistry, 15 (5-6). pp. 205-207.

Michael, M.S. and Pushpavanam, M. and Balakrishnan, K. (1996) Conversion coatings for zinc-cobalt alloy electrodeposits. Bulletin of Electrochemistry, 12 (01). pp. 80-82. ISSN 0256-1654

Mohan, S. and Kanagaraj, D. and Sindhuja, R. and Vijayalakshmi, S. and Renganathan, N.G. (2001) Electropolishing of stainless steel - a review. Transactions of the Institute of Metal Finishing, 79 (04). pp. 140-142. ISSN 0020-2967

Mohan, S. and Krishnan, R.M. and Renganathan, N.G. and Raman, S. and Ganeskesari, B. and Latha, H. (2003) Corrosion studies on pulsed and direct current chromium deposits. Transactions of the Institute of Metal Finishing, 81 (05). pp. 172-175. ISSN 0020-2967

Mohan, S. and Raj, V. (2005) A comparative study of DC and pulse gold electrodeposits. Transactions of the Institute of Metal Finishing, 83 (2). pp. 72-76. ISSN 0020-2967

Mohan, S. and Raj, V. (2005) The effect of additives on the pulsed electrodeposition of copper. Transactions of the Institute of Metal Finishing, 83 (4). pp. 194-198. ISSN 0020-2967

Mohan, S. and Rajasekaran, N. (2009) Pulse electrodeposition of tin from sulphate bath. Surface Engineering, 25 (8). pp. 634-638. ISSN 0267-0844

Mohan, S. and Ravindran, V. and Subramanian, B. and Saravanan, G. (2009) Electrodeposition of zinc–nickel alloy by pulse plating using non-cyanide bath. Transactions of the Institute of Metal Finishing, 87 (2). pp. 85-89. ISSN 0020-2967

Mohan, S. and Saravanan, G. and Bund, A. (2012) Role of magnetic forces in pulse electrochemical deposition of Ni nanoAl2O3 composites. Electrochimica Acta, 64. pp. 94-99. ISSN 0013-4686

Mohan, S. and Shriram, S. and Karthikeyan, S. (2002) Electrodeposition of nanocrystalline nickel. Bulletin of Electrochemistry , 18 (6). pp. 241-246. ISSN 0256-1654

Mohan, S. and Venkatachalam, R. (1998) Brush plating - present state of art. Bulletin of Electrochemistry , 14 (12). pp. 472-475. ISSN 0256-1654

Mohan, S. and Venkatachalam, R. (1998) A new batch for electropolishing of stainless steel. Transactions of the Metal Finishers Association of India, 07 (03). pp. 221-224.

Mohan, S. and Venkatachalam, R. and Srividhya, K. (1999) Studies on pulse plating of nickel with and without additives. Bulletin of Electrochemistry , 15 (7-8). pp. 257-261. ISSN 0256-1654

Mohan, S. and Vijayakumar, J. and Saravanan, G. (2009) Influence of CH3SO3H and AlCl3 in direct and pulse current electrodeposition of trivalent chromium. Surface Engineering, 25 (8). pp. 570-576. ISSN 0267-0844

Mukherjee, D. and Khan, A.A. and Kumar, M.R. and Mukherjee, S. and Alagappan, A.N. and Nagarajan, P. and Nesarajl, A.S. and Ghosh, S. and Muzhumathi, S. (2006) Metastable surface modification processes for corrosion and oxidation control. Surface Engineering, 22 (5). pp. 411-416. ISSN 0267-0844

Murali, K.R. and Austine, A. and Trivedi, D.C. (2005) Properties of ZnSe films brush plated on high temperature substrates. Materials Letters, 59 (21). pp. 2621-2624.

Murali, K.R. and Clara Dhanemozhi, A. and Rita, J. (2008) Brush plated ZnS films and their properties. Journal of Alloys and Compounds, 464 (1-2). pp. 383-386.

Muthumeenal, N. and Pushpavanam, M. and Krishnan, R.M. and Natarajan, S.R. (1992) Internal stress of electrodeposits of nickel on high strength high carbon steel. Bulletin of Electrochemistry, 08 (03). pp. 116-118. ISSN 0256-1654

Muthumeenal, V. and Malathy, P. and Krishnan, R.M. and Natarajan, S.R. (1991) Internal stress in electrodeposited chromium. Bulletin of Electrochemistry, 7 (3). pp. 124-127. ISSN 0256-1654

N

Narasimhan, K.C. (1972) Studies on the electrodeposition of lead dioxide. PhD thesis, Sri Venkateswara University.

Narasimham, K.C. and Silaimani, S.M. (1992) Electrochemical removal of iron and fluoride from water. Bulletin of Electrochemistry, 08 (07). pp. 331-333. ISSN 0256-1654

Council of Scientific and Industrial Research (1977) Improvements in or relating to etching of aluminium or its alloy for use as electrode in aluminium electrolytic capacitor. 141250.

Narasimhan, V.L. and Kanagaraj, D. and Venkatachalam, R. and Subramanian, R. (1986) Hard anodising of internal bore of cylindrical aluminium alloy for engineering applications. Bulletin of Electrochemistry , 2 (3). pp. 277-279. ISSN 0256-1654

Natarajan, S.R. (1985) Current efficiency and electrochemical equivalent in an electrolytic process. Bulletin of Electrochemistry , 01 (02). pp. 215-216. ISSN 0256-1654

Natarajan, S.R. and Krishnan, R.M. and Sreeveeraraghavan, S. (1986) Analysis of acidic solutions containing hexavalent chromium. Bulletin of Electrochemistry , 2 (2). pp. 135-136. ISSN 0256-1654

Council of Scientific and Industrial Research (1977) Improvements in or relating to electrolytic stripping of defective nickel electrodeposits from copper or brass substrates. 142628.

P

Parthasarathy, N.V. (1971) Studies on hydrogen co-deposition during electrode position of metals with particular reference to chromium. PhD thesis, Banaras Hindu University.

Parate, D.S. and Sabitha, R. and Malathy, P. and John, S. (1996) Studies on bipolar electrode for preferential deposit build up on intricate shaped article. Bulletin of Electrochemistry, 12 (5-6). pp. 294-296. ISSN 0256-1654

Parate, D.S. and Sabitha, R. and Pushpavanam, M. and John, S. (1996) Studies on bipolar electrode for preferential deposit build on intricate shaped article. Bulletin of Electrochemistry, 12 (05). pp. 294-296. ISSN 0256-1654

Park, Y.W. and Rameshbapu, G.N.K. and Lee, K.Y. (2007) Studies of tin coated brass contacts in fretting conditions under different normal loads and frequencies. Surface & Coatings Technology, 201. pp. 7939-7951.

Council of Scientific and Industrial Research (1970) Improvements in or relating to stripping of nickel deposits. 123289.

Council of Scientific and Industrial Research (1968) Improvements in or relating to electroplating of chromium from aqueous electrolytes. 112106.

Paul Raj, R. and Mohan, S. and Jha, S.K. (2016) Controlled reverse pulse electrosynthesized spikepiece-structured Ni/Ni(OH)2 interlayer nanoplates for electrochemical pseudocapacitor applications. Chemical Communications, 50. pp. 1930-1933. ISSN 1359-7345

Premlatha, S. and Ramesh Bapu, G.N.K. (2018) Fabrication of Co-Ni alloy nanostructures on copper foam for highly sensitive amperometric sensing of acetaminophen. Journal of Electroanalytical Chemistry, 822. pp. 33-42. ISSN 1572-6657

Pushpavanam, M. (1992) Electroless Ni-P-Al2O3 composites. Bulletin of Electrochemistry, 08 (08). pp. 399-401. ISSN 0256-1654

Pushpavanam, M. (1997) Nickel-diamond powder electrocomposites. Metal Finishing, 95 (11). pp. 22-23. ISSN 0026-0576

Pushpavanam, M. and Balakrishnan, K. (1985) Electrodeposited nickel composites for high temperature applications. Bulletin of Electrochemistry , 01 (03). pp. 251-255. ISSN 0256-1654

Pushpavanam, M. and John, S. and Shenoi, B.A. (1985) Chemical polishing of nickel-silver ornaments. Bulletin of Electrochemistry , 01 (04). pp. 381-383. ISSN 0256-1654

Pushpavanam, M. and Natarajan, S.R. (1992) Ni-ZrB2 electrocomposites. Bulletin of Electrochemistry, 08 (08). pp. 396-398. ISSN 0256-1654

Pushpavanam, M. and Natarajan, S.R. and Balakrishnan, K. (1997) Properties of Ni-WC electrocomposites. Plating and Surface Finishing, 84 (06). pp. 88-91. ISSN 0360-3164

Pushpavanam, M. and Natarajan, S.R. and Balakrishnan, K. and Sharma, L.R. (1990) Electrodeposition of palladium-nickel alloy. Bulletin of Electrochemistry, 06 (09). pp. 761-764. ISSN 0256-1654

Pushpavanam, M. and Siluvaimichael, M. (2004) Multilayered zinc-nickel and zinc-cobalt alloys- corrosion resistance under simulated conditions and field exposure. Transactions of the Institute of Metal Finishing, 82 (05). pp. 164-168. ISSN 0020-2967

Pushpavanam, S. and Mohan-, S. and Silaimani, S.M. and Viswanathan, R. and Narasimham, K.C. (1990) Electrolytic preparation of bromates using RuO2 based anodes. Bulletin of Electrochemistry, 06 (02). pp. 185-186. ISSN 0256-1654

R

Radhakrishnamurthy, P. (1999) Current efficiency of alloy plating and the electrochemical equivalent of an alloy. Bulletin of Electrochemistry , 15 (7-8). pp. 252-256. ISSN 0256-1654

Raj, V. and Rajaram, M.P. and Balasubramanian, G. and Vincent, S. and Kanagaraj, D. (2003) Pulse anodizing - an overview. Transactions of the Institute of Metal Finishing, 81 (04). pp. 114-121. ISSN 0020-2967

Council of Scientific and Industrial Research (1968) Improvements in or relating to prevention of tarnishing of copper and copper based alloys by electrolytic treatment. 107625.

Council of Scientific and Industrial Research (1980) Improved process for the production of stainless steel substrates with corrosion resistant black and shining coatings. 148034.

Rajasekaran, N. and Mohan, S. (2012) Giant Magnetoresistance in Electrodeposited Films: Current Status and the Influence of Parameters. Critical Reviews in Solid State and Materials Sciences, 37. pp. 158-180.

Rajasekaran, N. and Mohan, S. (2009) Structure, microstructure and corrosion properties of brush-plated Cu–Ni alloy. Journal of Applied Electrochemistry, 39 (10). pp. 1911-1916.

Ramasamy, M. and Sheela, G. and Malathy, P. (2000) Silver-Molybdenum Disulfide Electrocomposites. Transactions of the SAEST, 35 (3 & 4).

Ramesh, S. and Sethumadhavan, S. and Basha, C.A. (1996) Macrokinetic model of electrochemical parallel reaction. Bulletin of Electrochemistry, 12 (07). pp. 486-489. ISSN 0256-1654

Ramesh Bapu, G.N.K. and Ayyapparaju, J. and Devaraj, G. (1987) Electrodeposition of zinc-nickel alloy from fluoborate baths - as a substitute for electrogalvanising. Bulletin of Electrochemistry , 3 (2). pp. 139-141. ISSN 0256-1654

Ramesh Bapu, G.N.K. and Eagammai, C. and Jayakrishnan, S. (2008) Electrolytic recovery of silver from low concentrated silver cyanide spent plating solutions. Transactions of the Institute of Metal Finishing, 86 (1). pp. 66-72. ISSN 0020-2967

Rameshbapu, G.N.K. and Ayyapparaju, J. and Devaraj, G. (1999) Continuous copper plating of steel wires. Bulletin of Electrochemistry, 15 (7-8). pp. 248-251.

Rameshbapu, G.N.K. and Ayyapparaju, J. and Mahalingam, R. and Devaraj, G. and Guruviah, S. (1990) Composite plating of aluminium – a direct method. Bulletin of Electrochemistry, 06 (02). pp. 245-246. ISSN 0256-1654

Rameshbapu, G.N.K. and Devaraj, G. and Ayyapparaju, J. (1998) Studies on non-cyanide alkaline zinc electrolytes. Journal of Solid State Electrochemistry, 03 (01). pp. 48-51. ISSN 1432-8488

Rameshbapu, G.N.K. and Jayakrishnan, S. (2006) Oxidation characteristics of electrodeposited nickel–zirconia composites at high temperature. Materials Chemistry and Physics, 96 (2-3). pp. 321-325. ISSN 0254-0584

Rameshbapu, G.N.K. and Kumaresan, R. (1997) Additive characteristics in mixed chloride zinc electrolytes. Bulletin of Electrochemistry, 13 (04). pp. 166-169. ISSN 0256-1654

Rameshbapu, G.N.K. and Muralidharan, V.S. (1992) Corrosion of nickel-molybdenum disulphide electro composites. Bulletin of Electrochemistry, 08 (08). pp. 393-395. ISSN 0256-1654

Rameshbapu, G.N.K. and Ramesh, K. (1999) Electrodeposited tin-nickel alloy for decorative and protective applications. Bulletin of Electrochemistry, 15 (01). pp. 23-27. ISSN 0256-1654

Rameshbapu, G.N.K. and Thiruchelvam, T. (2001) Electrodeposited cobalt-boron nitride composites. Bulletin of Electrochemistry , 17 (12). pp. 529-534. ISSN 0256-1654

Rameshbapu, G.N.K. and Thiruchelvam, T. (2001) Validity of adsorption mechanism for electrodeposited zinc composites. Bulletin of Electrochemistry , 17 (9). pp. 405-408. ISSN 0256-1654

Rameshbapu, G.N.K. and Vasu, K.I. (1990) Electrodeposition of nickel-zirconia composites. Bulletin of Electrochemistry, 06 (01). pp. 37-39. ISSN 0256-1654

Rao, C.R.K. and MaIathy, P. (2000) Studies on the Deposition Behavior of Pt[(NH3)2(H20)2r2 Complex Bath. Transactions of the SAEST, 35 (3 & 4).

Rao, C.R.K. and Pushpavanam, M. (2006) Electrodeposition of platinum from platinum-ammine based baths. Transactions of the Institute of Metal Finishing, 84 (2). pp. 79-82. ISSN 0020-2967

Rao, R.K. and Malathy, P. (1999) Studies on new electroplating bath for platinum. Bulletin of Electrochemistry , 15 (5-6). pp. 183-185. ISSN 0256-1654

Ravindran, V. and Jayakrishnan, S. (2006) Investigations on recovery of heavy metals from plating effluents. Transactions of the Institute of Metal Finishing, 84 (4). pp. 202-205. ISSN 0020-2967

Ravindran, V. and Krishnan, R.M. and Muralidharan, V.S. (1998) Characteristics of an alkaline tartrate zinc plating bath. Metal Finishing, 96 (10). pp. 10-15. ISSN 0026-0576

Rekha, S. and Srinivasan, K.N. and John, S. (2010) Electroless deposition of copper from methane sulphonate complexed bath. Transactions of the Institute of Metal Finishing, 88 (4). ISSN 0020-2967

Renuka, R. and Ramamurthy, S. (1997) Electroplating of iron-phosphorous alloy part I – influence of reducing agents on the stability of the plating bath. Bulletin of Electrochemistry, 13 (12). pp. 456-460. ISSN 0256-1654

Renuka, R. and Ramamurthy, S. (2001) Gravimetric estimation of cyanide as silver chloride. Bulletin of Electrochemistry, 17 (6). pp. 253-254. ISSN 0256-1654

Rethinam, A.J. and Rameshbapu, G.N.K. and Muralidharan, V.S. (2003) Role of addition agents in zincate bath - a cyclic voltammetry study. Transactions of the Institute of Metal Finishing, 81 (04). pp. 136-140. ISSN 0020-2967

S

Srinivasan, K.N. (1988) Studies on the influence of addition agents in electroplating solutions with special reference to zinc plating baths. PhD thesis, Madurai-Kamaraj University.

Sankaranarayanan, K. and Basha, C.A. and Vijayavalli, R. (1985) Investigations on electrochemical reduction of hexavalent chromium in industrial effluents. Bulletin of Electrochemistry , 01 (05). pp. 517-519. ISSN 0256-1654

Saravanan, G. and Mohan, S. (2013) Nucleation of copper on mild steel in copper chloride (CuCl2�2H2O)–1-ethyl-3-methylimidazolium chloride [EMIM]Cl–ethylene glycol (EG) ionic liquid. New Journal of Chemistry, 37. pp. 2564-2567. ISSN 1144-0546

Saravanan, G. and Mohan, S. (2009) Pulsed electrodeposition of microcrystalline chromium from trivalent Cr-DMF bath. Journal of Applied Electrochemistry, 39 (8). pp. 1393-1397. ISSN 0021-891X

Saravanan, G. and Mohan, S. (2010) Structure, current efficiency, and corrosion properties of brush electrodeposited (BED) Cr from Cr(III)dimethyl formamide (DMF)-bath. Journal of Applied Electrochemistry, 40. pp. 1-6. ISSN 0021-891X

Saravanan, G. and Mohan, S. and Gnanamuthu, R.M. and Vijayakumar, J. (2008) Effect of AlCl3, CH3SO3H on thickness, current efficiency and corrosion properties of brush plated Cr(III) formate urea baths. Surface Engineering, 24 (6). pp. 458-463. ISSN 0267-0844

Sekar, R. and Eagammai, C. and Sobha , J. (2010) Effect of additives on electrodeposition of tin and its structural and corrosion behaviour. Journal of Applied Electrochemistry, 40. pp. 49-57. ISSN 0021-891X

Sekar, R. and Jagadesh, K.K. and Ramesh Bapu, G.N.K. (2015) Role of amino acids on electrodeposition and characterisation of zinc from alkaline zincate solutions. Transactions of the Institute of Materials Finishing. (In Press)

Sekar, R. and Selvi, T.C. and Eagammai, C. and Jayakrishnan, S. (2007) Chemical stripping of gold deposits from different substrates. Institute of Metal Finishing, 85 (3).

Sekar, R. and Sobha , J. (2006) Characteristics of zinc electrodeposits from acetate solutions. Journal of Applied Electrochemistry, 36 (5). pp. 591-597. ISSN 0021-891X

Sekar, R. and Sobha , J. (2012) Effect of sulphonic acids on electrodeposition of nickel and its structural and corrosion behaviour. Transactions of the Institute of Metal Finishing. ISSN 0020-2967 (In Press)

Sekar, R. and Sobha , J. (2005) Electrodeposition of Zinc from acetate baths. Plating and Surface Finishing, 92 (3). pp. 58-68.

Sekar, R. and Sobha , J. and Muralidharan, V.S. (2005) Electrochemical behaviour of zinc acetate complexes: a cyclic voltammetry study. Transactions of the Institute of the Metal Finishing, 83 (6). pp. 300-302.

Sekar, R. and Sriveeraraghavan, S. and Krishnan, R.M. (1999) Electrodeposition of zinc from acetate based electrolytes. Bulletin of Electrochemistry , 15 (5-6). pp. 219-222. ISSN 0256-1654

Selar, R. and Krishnan, R.M. and Muralidharan, V.S. and Sobha, J. (2005) Characteristics of acetate based zinc bath and deposits. Transactions of the Institute of Metal Finishing, 83 (2). pp. 104-108.

Selvam, M. (2010) Electroless silver deposition on ABS plastic using Co(II) as reducing agent. Transactions of the Institute of Metal Finishing, 88 (4). ISSN 0020-2967

Selvam, M. and Guruviah, S. (1989) Electrodeposition of zinc-manganese alloy from sulphate-citrate bath. Bulletin of Electrochemistry, 05 (05). pp. 352-358. ISSN 0256-1654

Selvam, M. and John, S. and Balasubramanian, V. and Shanmugam, N.V. and Srinivasan, K.N. (1986) Immersion blackening of galvalume coatings for photothermal conversion of solar energy. Bulletin of Electrochemistry , 2 (1). pp. 17-19. ISSN 0256-1654

Selvam, M. and John, S. and Shanmugam, N.V. and Srinivasan, K.N. and Shenoi, B.A. (1983) A Low current density black chrome electrolyte for photothermal conversion of solar energy. Metal Finishing, 81 (06). pp. 37-47. ISSN 0026-0576

Selvam, M. and Srinivasan, K.N. and Shanmugam, N.V. and John, S. and Shenoi, B.A. (1982) Black solar collector coatings from a trivalent chrome electrolyte. Metal Finishing, 80 (05). pp. 107-112. ISSN 0026-0576

Selvam, M. and Srinivasan, K.N. and Veeramani, P. and Raghavan, M. and John, S. (1989) Selective nickel-tin coatings for solar water heater. Bulletin of Electrochemistry, 05 (11). pp. 822-823. ISSN 0256-1654

Selvaraj, M. and Azim, S.S. and Chandran, K. and Guruviah, S. (1990) Electroless deposits of Ni-Mo-P alloy. Bulletin of Electrochemistry, 06 (04). pp. 416-417. ISSN 0256-1654

Senthilkumar, A. and Senthilrajapandiyan, C. and Ayyapparaju, J. and Rameshbapu, G.N.K. (2001) Effect of additives on electrodeposition of zinc. Bulletin of Electrochemistry , 17 (8). pp. 379-384. ISSN 0256-1654

Council of Scientific and Industrial Research (1966) Production of anodic coatings of black color on copper or copper rich alloys. 93681.

Sevugan, K. and Selvam, M. and Srinivasan, K.N. and Vasudevan, T. and Manisankar, P. (1993) Effect of agitation in electroless nickel deposition. Plating and Surface Finishing, 80 (03). pp. 56-58. ISSN 0360-3164

Shankar, C. and Pushpavanam, M. (2003) Composition distribution in Zn-Ni alloy plating. Transactions of the Metal Finishers' of India, 12 (03). pp. 220-223.

Shanmugam, N.V. and John, S. (2006) Electrodeposition of Chromium-Nickel-Iron alloy coatings from non-toxic electrolytes. Indian Surface Finishing , 3 (3-4). pp. 368-380. ISSN 0972-9364

Shanmugam, N.V. and John, S. and Selvam, M. and Srinivasan, K.N. and Shenoi, B.A. (1983) A Study of sealing anodised aluminium at room temperature. Know Your Product. pp. 63-65.

Shanmugam, N.V. and John, S. and Srinivasan, K.N. and Selvam, M. and Shenoi, B.A. A study on the characteristics of low concentration nickel plating electrolyte. In: Proceedings of the second international symposium on industrial and oriented basic electrochemistry, India.

Shanmugam, N.V. and John, S. and Veeramani, P. and Raghavan, M. and Guruviah, S. and Vasu, K.I. (1990) Electroforming of nickel moulds and dies for making glass reflectors. Bulletin of Electrochemistry, 06 (01). pp. 42-43. ISSN 0256-1654

Shanmugam, N.V. and Selvam, M. and Srinivasan, K.N. and John, S. and Shenoi, B.A. (1984) Black nickel-tin selective coatings for solar thermal energy conversion. Metal Finishing, 82 (10). pp. 91-95. ISSN 0026-0576

Shanmugam, N.V. and Srinivasan, K.N. and John, S. and Selvam, M. and Subramanian, R. (1986) A comparative study of nickel undercoats for solar collectors operating at high temperatures. Bulletin of Electrochemistry , 2 (6). pp. 545-546. ISSN 0256-1654

Shanmugasigamani, S. and Pushpavanam, M. (2006) Bright zinc-cobalt alloy deposits from an alkaline non-cyanide bath. Transactions of the Institute of Metal Finishing, 84 (6). pp. 326-331. ISSN 0020-2967

Shanmugasigamani, S. and Pushpavanam, M. (2008) Bright zinc–nickel alloy deposition from alkaline non-cyanide bath. Transactions of the Institute of Metal Finishing, 86 (2). pp. 122-128. ISSN 0020-2967

Shanmugasigamani, S. and Pushpavanam, M. (2006) Role of additives in bright zinc deposition from cyanide free alkaline baths. Journal of Applied Electrochemistry, 36 (3). pp. 315-322. ISSN 0021-891X

Shanmugasigamani, S. and Pushpavanam, M. (2006) A noncyanide alkaline bath for Zinc-Nickel alloy deposition. Indian Surface Finishing, 3 (3-4). pp. 345-358. ISSN 0972-9364

Shanmugasigamani, S. and Selvam, M. (2013) Surface Morphology and Microstructure of Zinc Deposit From Imidazole with Zinc Chloride Low Temperature Molten Salt Electrolyte in The Presence of Aluminium Chloride. International Journal of Engineering Research, 2 (3). pp. 187-193. ISSN 2319-6890

Shanmugasigamani, S. and Thangavelu, P.R. and Srinivasan, K.N. and Selvam, M. (2013) Alternate Zinc - Nickel alloy coating for hazardous Cadmium. International Journal of Advanced Research, 1 (10). pp. 495-509. ISSN 2320 5407

Shanmugasigamani, S. and Thangavelu , PR. and Srinivasan, K.N. and Selvam, M. (2014) Electrodeposition of Zinc from Low Temperature Molten Salt Electrolyte: Part II - Imidazole – Alcl3/Zinc Chloride LTMS. International Journal of Engineering Research & Technology (IJERT), 3 (2). pp. 757-761. ISSN ISSN: 2278-0181

Shanmugasigamani, S. and Thangavelu , PR. and Srinivasan, K.N. and Selvam, M. (2013) Electrodeposition of Zinc From Low Temperature Molten Salt Electrolyte:Part I-Imidazole And Zinc-Chloride Electrolyte. International Journal of Scientific Engineering and Technology, 2 (9). pp. 811-816. ISSN ISSN : 2277-1581

Shanmugasigamani , S. and Thangavelu, P.R. and Srinivasan, K.N. and Selvam, M. (2013) Zn-Ni Alloy Deposit for Cadmium Replacement Applications. INTERNATIONAL JOURNAL OF ENGINEERING SCIENCES & RESEARCH TECHNOLOGY, 2 (10). pp. 3041-3046. ISSN ISSN: 2277-9655

Shanthi, C. and Barathan, S. and Jaiswal, R. and Arunachalam, R.M. and Mohan, S. (2008) The effect of pulse parameters in electro deposition of silver alloy. Materials Letters, 62 (30). pp. 4519-4521. ISSN 0167-577X

Sheela, G. and Malathy, P. and Pushpavanam, S. (1999) Electrodeposition of iridium. Bulletin of Electrochemistry , 15 (5-6). pp. 208-210. ISSN 0256-1654

Sheela, G. and Malathy, P. and Pushpavanam, S. (2005) A bromide electrolyte for the electrodeposition of platinum and platinum–iridium alloy. Transactions of the Institute of Metal Finishing, 83 (2). pp. 77-81. ISSN 0020-2967

Sheela, G. and Pushpavanam, M. (2006) Corrosion behaviour of electrochemically joined aluminium and titanium. Indian surface finishing, 3 (3-4). pp. 333-344. ISSN 0972-9364

Sheela, G. and Pushpavanam, M. (2002) Diamond-dispersed electroless Nickel coatings. Metal Finishing, 100 (1). pp. 45-47. ISSN 0026-0576

Sheela, G. and Pushpavanam, M. (2002) Zirconium oxide deposition on titanium. Transactions of the SAEST, 37 (03). pp. 123-125.

Sheela, G. and Pushpavanam, M. and Pushpavanam, S. (2000) A Modified process for iridium electrodeposition. Transactions of the Institute of Metal Finishing, 78 (05). pp. 191-193. ISSN 0020-2967

Sheela, G. and Ramasamy, M. and Rao, C.R.K. and Pushpavanam, M. (2001) Electrochemical assessment on corrosion behaviour of electrochemically joined dissimilar metal joints. Bulletin of Electrochemistry , 17 (8). pp. 347-350. ISSN 0256-1654

Sheela, G. and Rao, C.H.R. and Azim, S.S. and Kumar, K. and Pushpavanam, M. (2004) Joining of passive dissimilar metals - Ti, SS and Al: An emerging application of electrodeposition. Transactions of the Institute of Metal Finishing, 82 (1). pp. 24-28. ISSN 0020-2967

Sheela, G. and Rao, C.H.R. and Azim, S.S. and Kumar, K. and Pushpavanam, M. (2004) Joining of passive dissimilar metals - Ti, SS and Al: an emerging application of electrodeposition. Transactions of the Institute of Metal Finishing, 82 (01). pp. 24-28. ISSN 0020-2967

Council of Scientific and Industrial Research (1975) Improvements in or relating to methods of plating of aluminium. 134121.

Council of Scientific and Industrial Research (1975) Improvements in or relating to powderless etching of aluminium and its alloys for photo engraving and block making. 137589.

Council of Scientific and Industrial Research (1977) Improvements in or relating to production of copper foils suitable for printed circuits. 141105.

Council of Scientific and Industrial Research (1979) An electrochemical process for preparation of lithographic printing trimbtallic plates. 146615.

Council of Scientific and Industrial Research (1982) An electrolytic process for the production of anodised aluminium plates with a desired pattern in colour. 150242.

Council of Scientific and Industrial Research (1975) A process for the production of a new aluminium alloy for electrical conductor having high ductility. 136487.

Council of Scientific and Industrial Research (1977) Improvements in or relating to anodising aluminium and its alloys using alternating current in sulphuric acid electrolyte. 142695.

Council of Scientific and Industrial Research (1977) Improvements in or relating to decorative anodising of aluminium and its alkaline electrolytes using A.C. 143404.

Council of Scientific and Industrial Research (1978) Improvements in or relating to the process of hard anodising of aluminium and its alloys in sulphuric acid electrolyte using alternating current. 143977.

Council of Scientific and Industrial Research (1984) Process for direct nickel chromium plating of substrates of aluminium and its alloys for solar collector applications. 153303.

Council of Scientific and Industrial Research (1975) Improvements in or relating to lithographic aluminium plates. 132894.

Council of Scientific and Industrial Research (1974) Improvements in or relating to lithographic printing plates. 133260.

Council of Scientific and Industrial Research (1969) Improvements in or relating to electrodeposition of iron-chromium alloy deposits. 114868.

Council of Scientific and Industrial Research (1969) Improvements in or relating to electrodeposition of iron-chromium-nickel alloy deposits. 114867.

Council of Scientific and Industrial Research (1967) Improvements in or Relating to the Chemical Polishing of Copper and its Alloys. 101925.

Council of Scientific and Industrial Research (1966) Improvements in or relating to the electrodeposition of black chromium plating. 97005.

Council of Scientific and Industrial Research (1974) Improvements in or relating to the spangle finish on tinned steel. 133404.

Council of Scientific and Industrial Research (1966) Improvements in or relating to etching and decorative anodising of aluminium and its alloys. 96662.

Council of Scientific and Industrial Research (1978) Improved process for the manufacture of lithographics printing plates and more particularly multilayer printing plates. 146435.

Council of Scientific and Industrial Research (1978) Improvements in or relating to anodising of aluminium and its alloys. 145154.

Council of Scientific and Industrial Research (1977) Method of producing and sealing coloured aluminium powders. 141458.

Council of Scientific and Industrial Research (1988) Improved process for the sealing of anodised aluminium and its alloy substrates. 150403.

Council of Scientific and Industrial Research (1982) An improved process for chemical colouring of aluminium and its alloys substrates. 150164.

Council of Scientific and Industrial Research (1982) An improved process for the production of nickel electroforms. 154930.

Council of Scientific and Industrial Research (1974) Improvements in or relating to electrodeposition of alumina over metals and non-metals (suitably made conductive) for decorative finishes. 132895.

Council of Scientific and Industrial Research (1976) Improvements in or relating to colouring of aluminium powder. 139484.

Council of Scientific and Industrial Research (1974) Improvements in or relating to electrolytic bath composition for electropolishing of aluminium and its alloys. 131960.

Council of Scientific and Industrial Research (1974) Invention relating to a new method of etching of super purity aluminium for use as electrodes in aluminium electrolytic capacitor. 132846.

Council of Scientific and Industrial Research (1975) Improvements in or relating to the electrodeposition of high speed bright hard silver. 137366.

Council of Scientific and Industrial Research (1975) Development of a brightener for electrodeposition of zinc from cyanide bath. 137207.

Council of Scientific and Industrial Research (1976) Improvements in or relating to the process of electrodeposition of bright zinc from acid baths. 138579.

Counsil of Scientific and Industrial Research (1972) Improvements in or relating to electrolytic bath composition for colour anodising of aluminium and its alloys. 127270.

Council of Scientific and Industrial Research (1976) Improvements in or relating to electrolytic coloring of aluminium and its alloys for decorative and architectural uses. 140537.

Council of Scientific and Industrial Research (1967) Improvements in or relating to etching of tantalum for use in electrolytic capacitors. 103971.

Council of Scientific and Industrial Research (1969) Improvements in or relating to electrolyte for tantalum electrolytic capacitors. 115204.

Council of Scientific and Industrial Research (1974) Improvements in or relating to heat treatment of etched aluminium and its alloy for use as electrodes in aluminium electrolytic capacitors. 131900.

Council of Scientific and Industrial Research (1980) Improved process for the production of dielectric oxide film coated etched aluminium foil for use as anode in high voltage electrolytic capacitor. 148226.

Council of Scientific and Industrial Research (1980) An improved for the removal of chloride ions from an etched aluminium foil for use in aluminium electrolytic capacitor. 148080.

Council of Scientific and Industrial Research (1981) An improved device for electrolytic etching of aluminium foil using direct current. 148324.

Council of Scientific and Industrial Research (1976) Improvements in or relating to etching of aluminium or its alloy for use as electrodes in aluminium electrolytic capacitors. 139702.

Council of Scientific and Industrial Research (1966) Improvements in or Relating to Etching Tantalum. 95423.

Council of Scientific and Industrial Research (1966) Improvements in or Relating to Etching of Foils of Aluminium or Aluminium alloys for Capacitors. 100313.

Council of Scientific and Industrial Research (1976) Improvements in or relating to fabrication of solid foil type aluminium electrolytic capacitors. 140220.

Council of Scientific and Industrial Research (1974) Improvements in or relating to electrolytic bath composition for integral colour anodising of aluminium and its alloys. 132423.

Council of Scientific and Industrial Research (1974) Improvements in or relating to electropolishing of mild steel. 135147.

Council of Scientific and Industrial Research (1975) Improvements in or relating to electroless copper plating bath control over acrylonitrile butadiene styrene. 134186.

Council of Scientific and Industrial Research (1982) An improved process for the electrodeposition of bright zinc coatings on substrates. 149602.

Council of Scientific and Industrial Research (1984) A process for the production of improved corrosion resistant zinc coatings on steel substrates by electrodeposition. 152856.

Council of Scientific and Industrial Research (1980) Improved process for the electrodeposition of iron-nickel alloys coatings on metal substrates. 148110.

Council of Scientific and Industrial Research (1984) Improved process for the electrodeposition of nickel-iron alloy coatings on metal substrates. 153515.

Council of Scientific and Industrial Research (1976) Improvements in or relating to drive arrangements for foil materials through continous processing equipment with special reference to the maintanance of constant linear speed. 139258.

Council of Scientific and Industrial Research (1980) Process for the production of electroformed copper foil. 148078.

Council of Scientific and Industrial Research (1979) Improved process for pre-treatment of stainless steel materials used in electroforming of copper foils. 150472.

Council of Scientific and Industrial Research (1975) Improvements in or relating to black chrome plating. 137389.

Council of Scientific and Industrial Research (1967) Improvements in or relating to nickel electrodeposition. 101930.

Council of Scientific and Industrial Research (1975) Improvements in and relating to uniform current distribution in electrolytic cells for electrofinishing processes. 138189.

Council of Scientific and Industrial Research (1966) Improvements in or Relating to Bright Nickel Plating. 95421.

Council of Scientific and Industrial Research (1966) Improvements in or relating to direct plating of copper on aluminium and aluminium alloys. 96690.

Council of Scientific and Industrial Research (1966) Improvements in or relating to preparation of lithographic aluminium plates. 96606.

Council of Scientific and Industrial Research (1972) Improvements in or relating to preparation of lithographic aluminium plates. 129037.

Council of Scientific and Industrial Research (1982) The continuous process for the surface graining of aluminium foil for aluminium offset lithographic plates used in duplicating machine. 150486.

Council of Scientific and Industrial Research (1967) Improvements in or relating to direct plating of copper on aluminium. 103970.

Council of Scientific and Industrial Research (1978) Improvements in or relating to colouring of nickel chrome stainless steel. 144331.

Council of Scientific and Industrial Research (1976) Improvements in or relating to the immersion deposition of nickel on mild steel for subsequent deposition with copper. 138564.

Council of Scientific and Industrial Research (1977) Improvements in or relating to electroplating of copper on stainless steel. 143286.

Council of Scientific and Industrial Research (1975) Improvements in or relating to decorative finish on copper and its alloys. 137870.

Shibli, S.M.A. and Manu, R. and Beegum, S. (2008) Studies on the influence of metal oxides on the galvanic characteristics of hot-dip zinc coating. Surface and Coatings Technology, 202 (9). pp. 1733-1737. ISSN 0257-8972

Silaimani, S.M. and John, S. (2001) Review on recent advances in electroforming during the last decade. Bulletin of Electrochemistry , 17 (12). pp. 553-560. ISSN 0256-1654

Silaimani, S.M. and John, S. and Muralidharan, V.S. (2001) Role of Zirconium on the dissolution and deposition of copper from sulphuric acid solutions. Bulletin of Electrochemistry , 17 (1). pp. 10-12. ISSN 0256-1654

Silaimani, S.M. and Pushpavanam, M. and Narasimham, K.C. (2001) Electrochemical preparation of Tin fluoborate for Tin plating. Bulletin of Electrochemistry , 17 (9). pp. 409-414. ISSN 0256-1654

Silaimani, S.M. and Thangavelu, P.R. and John, S. (2000) Nickel-copper alloy electroforming from the citrate-sulphamate niixed bath. Bulletin of Electrochemistry , 16 (7). pp. 326-328. ISSN 0256-1654

Silaimani, S.M. and Thangavelu, P.R. and John, S. (1998) Universal cell for evaluating plating baths. Bulletin of Electrochemistry , 14 (4-5). pp. 157-159. ISSN 0256-1654

Siluvaimichael, M. and Malathy, P. and Balakrishnan, K. (1996) Conversion coatings for zinc-cobalt alloy electrodeposits. Bulletin of Electrochemistry, 12 (1-2). pp. 80-82. ISSN 0256-1654

Sobha, J. and Vasu, K.I. (1999) Electroplating OF Silver-Cadmium alloys. Bulletin of Electrochemistry , 15 (5-6). pp. 228-232. ISSN 0256-1654

Sobha , J. (2000) Electrodeposition of silver-cadmium alloys from cyanide electrolytes. Transactions of the Institute of Metal Finishing, 78 (03). pp. 124-128. ISSN 0020-2967

Sobha , J. (2002) A voltammetric study on the electrodeposition and dissolution of cadmium in plating solutions. Bulletin of Electrochemistry , 18 (1). pp. 19-24. ISSN 0256-1654

Sobha , J. and Kiruba, D. and Sriveeraraghavan, S. and Krishnan, R.M. (1999) Electropolishing of electroplated silver. Bulletin of Electrochemistry , 15 (5-6). pp. 223-227. ISSN 0256-1654

Sobha , J. and Krishna, N. and Sujatha, K.P. and Sriveeraraghavan, S. and Krishnan, R.M. and Natarajan, S.R. (1996) Electroplating of Nickel-Copper alloys. Bulletin of Electrochemistry, 12 (5-6). pp. 259-265. ISSN 0256-1654

Sobha , J. and Krishna, N. and Sujatha, K.P. and Sriveeraraghavan, S. and Krishnan, R.M. and Natarajan, S.R. (1996) Electroplating of nickel-copper alloys. Bulletin of Electrochemistry, 12 (05). pp. 259-265. ISSN 0256-1654

Sobha , J. and Malathy, P. and Natarajan, S.R. and Subramanian, R. (1986) Copper undercoats on the corrosion resistance of bright nickel-chromium and of nickel-iron-chromium electrodeposits on steel substrates. Bulletin of Electrochemistry , 2 (3). pp. 251-255. ISSN 0256-1654

Sobha , J. and Natarajan, S.R. and John, S. (1988) Palladium plating for electronic applications. Bulletin of Electrochemistry , 04 (09). pp. 793-796. ISSN 0256-1654

Sobha , J. and Sumathi, B.S. and Tamilarasi, K.R. and Krishnan, R.M. and Sriveeraraghavan, S. and Sekhar , R. and Visalakshi, R. (1999) Porosity testing of silver electroplates. Bulletin of Electrochemistry , 15 (5-6). pp. 192-194. ISSN 0256-1654

Srinivasan, K.N. and Iyer, S.V.K. (1990) The absorption of addition agents in acid zinc plating. Bulletin of Electrochemistry, 06 (01). pp. 35-36. ISSN 0256-1654

Srinivasan, K.N. and John, S. (2009) Electroless nickel deposition from methane sulfonate bath. Journal of Alloys and Compounds, 486 (1-2). pp. 447-450. ISSN 0925-8388

Srinivasan, K.N. and John, S. (2005) Studies on electroless nickel–PTFE composite coatings. Surface Engineering, 21 (2). pp. 156-160. ISSN 0267-0844

Srinivasan, K.N. and John, S. and Karthikeyan, S. and Muthumeenal, A. and Vasudevan, T. (2001) Studies on electroless nickel-molybdenum-phosphorus deposition. Bulletin of Electrochemistry , 17 (2). pp. 91-93. ISSN 0256-1654

Srinivasan, K.N. and John, S. and Karthikeyan, S. and Vasudevan, T. (2003) Studies on electroless nickel-phosphorous molybdenum sulphide composite coatings. Transactions of the Metal Finishers of India, 12 (03). pp. 143-147.

Srinivasan, K.N. and Meenakshi, R. and Santhi, A. and Thangavelu, P.R. and John, S. (2010) Studies on development of electroless Ni–B bath for corrosion resistance and wear resistance applications. Surface Engineering, 26 (3). ISSN 0267-0844

Srinivasan, K.N. and Selvam, M. and Guruviah, S. and Vasu, K.I. (1989) Electroless nickel plating on beryllium. Transactions of the SAEST, 24 (01). pp. 45-50.

Srinivasan, K.N. and Selvam, M. and Iyer, S.V.K. (1993) Hydrogen permeation during zinc-manganese alloy plating. Journal of Applied Electrochemistry, 23 (04). pp. 358-363. ISSN 0021-891X

Srinivasan, K.N. and Shanmugam, N.V. and Selvam, M. (1988) Immersion copper coating of steel. Bulletin of Electrochemistry , 04 (04). pp. 315-317. ISSN 0256-1654

Srinivasan, K.N. and Shanmugam, N.V. and Selvam, M. and John, S. (1987) Chemical oxidation of aluminium for producing brilliant colours. Bulletin of Electrochemistry , 3 (5). pp. 419-421. ISSN 0256-1654

Srinivasan, K.N. and Shanmugam, N.V. and Selvam, M. and John, S. and Shenoi, B.A. (1985) Electrolytic stain proofing of copper foils for printed circuit applications. Surface Technology, 26 (1). pp. 17-21. ISSN 0376-4583

Srinivasan, K.N. and Shanmugam, N.V. and Selvam, M. and John, S. and Shenoi, B.A. (1984) Nickel-black solar absorber coatings. Energy Conversion Management, 24 (04). pp. 255-258.

Srinivasan, K.N. and Subramanian, R. and Kapali, V. and Venkatakrishnaiyer, S. (1986) Studies on potential for ionisation of diffused hydrogen at palladium/alkali interface. Bulletin of Electrochemistry , 2 (6). pp. 547-552. ISSN 0256-1654

Srinivasan, K.N. and Thangavelu, P.R. (2012) Electroless deposition of composite coatings containing kaolin nanoparticles. Transactions of the Institute of Metal Finishing, 90 (2). pp. 105-112. ISSN 0020-2967

Srinivasan, K.N. and Veeramani, P. and Thangavelu, P.R. and Shanmugam, N.V. and Raghavan, M. and John, S. (1998) Electroforming of thin channel heat exchangers. Transactions of the Metal Finishers Association of India, 07 (02). pp. 119-121.

Sriveeraraghavan, S. and Krishnan, R.M. and Natarajan, S.R. and Balakrishnan, K. (1998) Preliminary testing of perchlorate cadmium plating solutions. Plating and Surface Finishing, 84 (04). pp. 66-73. ISSN 0360-3164

Sriveeraraghavan, S. and Krishnan, R.M. and Sobha, J. and Natarajan, S.R. and Murugadoss, K. and Ramanan, C.V. (2001) Performance characteristics of different forms of anodes in copper electroplating. Bulletin of Electrochemistry , 17 (3). pp. 137-140. ISSN 0256-1654

Sriveeraraghavan, S. and Silvester, P. and Krishnan, R.M. and Sobha, J. and Natarajan, S.R. and Balakrishnan, K. (1998) Copper deposition from perchlorate based electrolytes. Bulletin of Electrochemistry, 14 (10). pp. 320-325.

Subramanian, A. and Mohan, S. and Vasudevan, T. (2002) Corrosion resistance of electropolished stainless steels. Bulletin of Electrochemistry , 18 (3). pp. 97-98. ISSN 0256-1654

Subramanian, A. and Srinivasan, K.N. and John, S. and Vasudevan, T. (2001) Recovery of activated nickel from residues for electroforming applications. Journal of Applied Electrochemistry, 31 (1). pp. 35-40. ISSN 0021-891X

Subramanian, B. and Jayachandran, M. and Jayakrishnan, S. (2006) Surface characterisation studies of nickel-chromium PVD: EB evaporated low carbon steel samples. Surface Engineering, 22 (6). pp. 447-451. ISSN 0267-0844

Subramanian, B. and Jayakumar, S. and Jayachandran, M. and Sobha , J. (2005) Studies on nickel electrodeposits on dc magnetron sputtered copper substrates. Surface Engineering, 21 (2). pp. 151-155. ISSN 0267-0844

Subramanian, B. and Mohan, S. and Sobha, J. (2006) Structural, microstructural and corrosion properties of brush plated copper–tin alloy coatings. Surface & Coatings Technology, 201 (3-4). pp. 1145-1151. ISSN 0257-8972

Subramanian, B. and Mohan, S. and Sobha , J. (2007) Selective area deposition of Tin–Nickel alloy coating – an alternative for decorative chromium plating. Journal of Applied Electrochemistry, 37. pp. 219-224.

Subramanian, K. and Periasamy, V.M. and Malathy, P. and Ramasamy, K. (2009) Predictive modeling of deposition rate in electro-deposition of copper–tin using regression and artificial neural network. Journal of Electroanalytical Chemistry, 636 (1-2). pp. 30-35.

Subramanian, K. and Periasamy, V.M. and Pushpavanam, M. and Ramasamy, K. (2009) Predictive Modeling of Copper in Electro-deposition of Bronze Using Regression and Neural Networks. Portugaliae Electrochimica Acta, 27 (1). pp. 47-55. ISSN 0872-1904

Subramanian, M. and Dhanikaivelu, N. and Ramaprabha, R. (2007) Pulsed electrodeposition of cobalt and nickel alloy. Institute of Metal Finishing, 85 (5).

Council of Scientific and Industrial Research (1969) Improvements in or relating to copper electroplating on stainless steels. 113473.

T

Thangavelu, P.R. and Silaimani, S.M. and John, S. (1999) Electroforming of Nickel-Tin-Zinc alloy. Bulletin of Electrochemistry , 15 (5-6). pp. 186-188. ISSN 0256-1654

Thangavelu, P.R. and Silaimani, S.M. and Shanmugam, N.V. and Veeramani, P. and John, S. and Thomas, M. (1998) Hard nickel electroforming for producing holograms. Bulletin of Electrochemistry , 14 (3). pp. 115-118. ISSN 0256-1654

Thangavelu, P.R. and Veeramani, P. and Srinivasan, K.N. and Shanmugam, N.V. and Malathy, P. and Raghavan, M. and John, S. (2000) Copper electroforming of cryogentic upper stage main engine. Bulletin of Electrochemistry , 16 (11). pp. 493-496. ISSN 0256-1654

U

Council of Scientific and Industrial Research (1973) Improvements in or relating to the electrolytic preparation of lead dioxide powder. 131959.

V

Vairamuthu, R. and Subramaniam, M. (2007) Effect of a-picoline and quinoline on dc and pulse plating of nickel directly on aluminium. Institute of Metal Finishing, 85 (3).

Vasantha, V.S. and Malathy, P. and Muralidharan, S. (1999) Corrosion resistant tin electrodeposit. Bulletin of Electrochemistry, 15 (5-6). pp. 215-218.

Vasantha, V.S. and Silaimani, S.M. and Ganeshkumar, A. and Josephkennedy, C. and Akila, G. and Sobha , J. and Sriveeraraghavan, S. and Pushpavanam, M. and Krishnan, R.M. and Guruviah, S. and Natarajan, S.R. (1990) Characteristics of fluoborate solutions with titanium for cadmium electrodeposition. Bulletin of Electrochemistry, 06 (01). pp. 44-45. ISSN 0256-1654

Vasudevan, S. and Mohan , S. (2006) Electrochemical Preparation of Barium Chlorate from Barium Chloride. Industrial and Engineering Chemistry Research, 45 (9). pp. 2923-2928. ISSN 0888-5885

Veeramani, P. and Silaimani, S.M. and John, S. (2006) Electroforming of Nickel-Tungsten alloy for high temperature applications. Indian Surface Finishing, 3 (3-4). pp. 359-367. ISSN 0972-9364

Veeramani, P. and Thangavelu, P.R. and Silaimani, S.M. and Raghavan, M. and John, S. (2001) Integrated solar still system for rinse water from zinc plating industries. Bulletin of Electrochemistry , 17 (1). pp. 24-26. ISSN 0256-1654

Veeramani, P. and Thangavelu, P.R. and Silaimani, S.M. and Raghavan, M. and John, S. (2000) Treatment of wash water of chromium plating using solar still. Transactions of the Metal Finishers Association of India, 09 (03). pp. 137-140.

Venkatachalam, R. and Kanagaraj, D. and Narasimhan, V.L. and Subramanian, R. (1986) Chemical blackening of stainless steel. Bulletin of Electrochemistry , 2 (4). pp. 383-385. ISSN 0256-1654

Venkatachalam, R. and Kanakaraj, D. and Narasimhan, V.L. and Subramanian, R. (1986) Lead-tin-copper alloy deposition from fluoborate solutions. Bulletin of Electrochemistry , 2 (3). pp. 261-263. ISSN 0256-1654

Venkatachalam, R. and Rameshbapu, G.N.K. and Guruviah, S. and Shanmugam, N.V. (1988) Cathodic treatment of coloured stainless steel. Bulletin of Electrochemistry , 04 (05). pp. 433-435. ISSN 0256-1654

Council of Scientific and Industrial Research (1984) A process for the production of solid iron conductor articles such as tubes diaphrams and the like and articles obtained thereby. 152476.

Vidyasagaran, E. and John, S. and Raghavan, M. and Vasu, K.I. (1990) Solar pond – a nonpolluting energy reservoir for heating plating solutions. Bulletin of Electrochemistry, 06 (05). pp. 507-508. ISSN 0256-1654

Vijayakumar, J. and Mohan, S. (2013) Effect of benzyl alcohol and thiourea on electrodeposition of cadmium: electrochemical impedance spectroscopy study. Transactions of the Institute of Metal Finishing, 91 (3). pp. 165-168. ISSN 0020-2967

Vijayakumar, J. and Mohan, S. and Yadav, S.S. (2011) Effects of primary dicarboxylic acids on microstructure and mechanical properties of sub-microcrystalline Ni–Co alloys. Journal of Alloys and Compounds, 509 (040). pp. 9692-9695. ISSN 0925-8388

Visalakshi, R. and Sriveeraraghavan, S. and Sekar, R. and Sobha , J. and Krishnan, R.M. (1999) A simple method for the preparation of ruthenium plating solution. Bulletin of Electrochemistry , 15 (7-8). pp. 238-241. ISSN 0256-1654