Suryanarayanan, V. and Noel, M. (2009) A comparative evaluation on the anodic behavior of Cu and Ag electrodes in non-aqueous fluoride and fluoroborate media. Journal of Solid State Electrochemistry, 13 (12). pp. 1913-1923. ISSN 1432-8488

PDF Restricted to Registered users only Download (739Kb) | Request a copy

Abstract

The voltammetric responses of copper and silver had been extensively studied and compared in a variety of non-aqueous solvents such as acetonitrile (AN), propylene carbonate (PC) and sulfolane containing two different supporting electrolytes namely triethylaminetrishydrogen fluoride (TEA.3HF) and tetrabutylammonium tetrafluoroborate (TBABF4). The dissolution rate and surface transformation on the electrode surfaces as a result of anodic polarization was investigated using atomic absorption spectroscopy (AAS) and scanning electron microscopy (SEM), respectively. In solvent-free TEA.3HF medium, the copper electrode shows high charge recovery ratio (Qc/Qa), and the difference between the initial anodic and cathodic potentials, obtained at a current density of 2 mA cm−2, is around 0.11 V, suggesting that in this medium, Cu can certainly serve as reference electrode. On the other hand, on Ag electrode, substantial dissolution was observed leading to very high anodic (Qa) and cathodic (Qc) charges, and the surface morphology after the cyclic polarization results in roughened surface with large pores. The effects of incorporating AN and water as additives in TEA.3HF on the solubility and stability of these metal fluoride films are also reported. The dissolution pattern and film formation behavior of these two metals in the different solvents containing fluoride and fluoroborate ionic species have several qualitative similarities, as noted from cyclic voltammetry responses and SEM morphology. Anodic dissolution and precipitation process for both Cu and Ag depends significantly on the nature of supporting electrolytes as well as solvents. In AN containing 0.1 M TEA.3HF, the dissolution of Cu and Ag electrodes was very high. Fluoride salts of Cu show lesser solubility than Ag in those solvents, while fluoroborate salts exhibit the reverse trend. The AAS data suggest that for a particular salt, which may be either fluoride or fluoroborate of Cu and Ag, the relative solubility decreases in the order AN > PC > sulfolane.

Item Type:	Article
Uncontrolled Keywords:	Anodic behavior; Cu dissolution; Ag dissolution; Fluoride and fluoroborate anions
Subjects:	Electroorganic
Divisions:	UNSPECIFIED
Depositing User:	TTBD CECRI
Date Deposited:	02 Apr 2012 06:30
Last Modified:	02 Apr 2012 06:30
URI:	http://cecri.csircentral.net/id/eprint/663

Actions (login required)

View Item