Choudhury, N.A. and Prashant, S.K. and Pitchumani, S. and Sridhar, P. and Shukla, A.K. (2009) Poly (vinyl alcohol) hydrogel membrane as electrolyte for direct borohydride fuel cells. Journal of Chemical Sciences, 121 (5). pp. 647-654. ISSN 0974-3626

PDF Restricted to Registered users only Download (492Kb) | Request a copy

Abstract

A direct borohydride fuel cell (DBFC) employing a poly (vinyl alcohol) hydrogel membrane electrolyte (PHME) is reported. The DBFC employs an AB5 Misch metal alloy as anode and a goldplated stainless steel mesh as cathode in conjunction with aqueous alkaline solution of sodium borohydride as fuel and aqueous acidified solution of hydrogen peroxide as oxidant. Room temperature performances of the PHME-based DBFC in respect of peak power outputs; ex-situ cross-over of oxidant, fuel, anolyte and catholyte across the membrane electrolytes; utilization efficiencies of fuel and oxidant, as also cell performance durability are compared with a similar DBFC employing a Nafion®-117 membrane electrolyte (NME). Peak power densities of ~30 and ~40 mW cm–2 are observed for the DBFCs with PHME and NME, respectively. The crossover of NaBH4 across both the membranes has been found to be very low. The utilization efficiencies of NaBH4 and H2O2 are found to be ~24 and ~59%, respectively for the PHME-based DBFC; ~18 and ~62%, respectively for the NME-based DBFC. The PHME and NME–based DBFCs exhibit operational cell potentials of ~1⋅2 and ~1⋅4 V, respectively at a load current density of 10 mA cm–2 for ~100 h.

Item Type:	Article
Uncontrolled Keywords:	Poly (vinyl alcohol) hydrogel; Nafion®-117 membrane; cross over; utilization efficiency; direct borohydride fuel cell; sodium borohydride; hydrogen peroxide
Subjects:	Fuel Cells
Divisions:	UNSPECIFIED
Depositing User:	TTBD CECRI
Date Deposited:	20 Jan 2012 23:20
Last Modified:	20 Jan 2012 23:20
URI:	http://cecri.csircentral.net/id/eprint/423

Actions (login required)

View Item