Murali, K.R. and Thirumoorthy, P. and Kannan, C. and Sengodan, V. (2009) Pulse plated CdSxTe1-x films and their properties. Solar Energy, 83 (1). pp. 14-20. ISSN 0038-092X

PDF Restricted to Registered users only Download (537Kb) | Request a copy

Abstract

CdSxTe1-x films were deposited on titanium and conducting glass substrates at room temperature using 0.25 M cadmium sulphate, the concentration of sodium thiosulphate and TeO2 dissolved in sodium hydroxide was varied in the range of 0.01–0.05 M. The as deposited films exhibited hexagonal structure irrespective of the composition. The FWHM maximum of the x-ray diffraction peaks were found to decrease with increase of duty cycle. The optical energy gap values are in the range of 1.54–2.32 eV for films of different composition, it is observed that the band gap shifts towards CdS side as the concentration of CdS in the films increase. XPS studies indicated the formation of CdSTe solid solution. The grain size increases from 11.54 to 99.40 nm as the value of x increases from 0.2 to 0.8. The surface roughness is found to increase from 0.22 to 2.50 nm as the value of ‘x’ increases from 0.2 to 0.8. The resistivity is found to vary from 53 to 8 ohm cm as the ‘x’ value decreases from 1 to 0.

Item Type:	Article
Uncontrolled Keywords:	Thin films; Semiconductors; Brush plating; Electrodeposition
Subjects:	Electrochemical Materials Science
Divisions:	UNSPECIFIED
Depositing User:	ttbdu cecri
Date Deposited:	02 Apr 2012 05:35
Last Modified:	02 Apr 2012 05:35
URI:	http://cecri.csircentral.net/id/eprint/1194

Actions (login required)

View Item