Number of items: 70. AAugustin, C.O. and Kalaiselvan, R. (2003) Combustion synthesis of ABO3 and AB2O4 compounds - an overview. Bulletin of Electrochemistry, 19 (07). pp. 319-334. ISSN 0256-1654 BBalaji, R. and Pushpavanam, M. (2003) Methanesulphonic acid in electroplating related metal finishing industries. Transactions of the Institute of Metal Finishing, 81 (05). pp. 154-158. ISSN 0020-2967 CChandran, M. and Sarma, R.L. and Krishnan, R.M. (2003) Characteristics of non-cyanide acid zinc plating baths and coatings. Transactions of the Institute of Metal Finishing, 81 (06). pp. 207-209. ISSN 0020-2967 Chitra, R. and Renuka, R. (2003) Electroreduction of oxygen on mercury in the presence of titanium silicalite, TS-1. Journal of Applied Electrochemistry, 33. pp. 443-446. ISSN 0021-891X DDaroukh, M.A.L and Vashook, V.V. and Ullmann, H. and Tietz, F. and Arulraj, I. (2003) Oxides of the AMO3 and A2MO4-type: structural stability, electrical conductivity and thermal expansion. Solid State Ionics, 158. pp. 141-150. ISSN 0167-2738 Deepa, L.C. and Sathiyanarayanan, S. and Marikkannu, C. and Mukherjee, D. (2003) Effect of divalent cations in low zinc ambient temperature phosphating bath. Anti-Corrosion Methods and Materials , 50 (04). pp. 286-290. ISSN 0003-5599 Delphine, S.M. and Jayachandran, M. and Sanjeeviraja, C. (2003) Pulsed electrodeposition and characterisation of tungsten diselenide thin films. Materials Chemistry and Physics, 81. pp. 78-83. ISSN 0254-0584 Devadasan, J.J. and Sanjeeviraja, C. and Jayachandran, M. (2003) Electrosynthesis and characterisation of n-WSe2 thin films. Materials Chemistry and Physics, 77. pp. 397-401. ISSN 0254-0584 Devadoss, V. and Noel, M. and Jayaraman, K. and Basha, C.A. (2003) Electrochemical behaviour of Mn3+/Mn2+, Co3+/Co2+ and Ce4+/Ce4+ redox mediators in methanesulfonic acid. Journal of Applied Electrochemistry, 33. pp. 319-323. ISSN 0021-891X Dhanaraj, J. and Jagannathan, R. and Trivedi, D.C. (2003) Y2O2S : Eu31 nanocrystals—synthesis and luminescent properties. Journal of Materials Chemistry, 13. pp. 1778-1782. ISSN 0959-9428 Dolli, H. and Muralidharan, V.S. and Rengaswamy, N.S. (2003) Reliability evaluation of embeddable reference electrodes for use in reinforced cement concrete. Bulletin of Electrochemistry, 19 (01). 01-07. ISSN 0256-1654 FFey, G.T.K. and Lee, D.C. and Lin, Y.Y. and Premkumar, T. (2003) High-capacity disordered carbons derived from peanut shells as lithium-intercalating anode materials. Synthetic Metals, 139. pp. 71-80. Fey, G.T.K. and Lu, C.Z. and Premkumar, T. (2003) Preparation and electrochemical properties of high-voltage cathode materials, LiMyNi0.5yMn1.5O4 (M ¼ Fe, Cu, Al, Mg; y ¼ 0:0–0.4). Journal of Power Sources, 115. pp. 332-345. ISSN 0378-7753 Fey, G.T.K. and Lu, C.Z. and Premkumar, T. (2003) Solid-state synthesis and electrochemical characterization of LiMyCr0.5−yMn1.5O4 (M = Fe or Al; 0.0 < y < 0.4) spinels. Materials Chemistry and Physics, 80. pp. 309-318. ISSN 0254-0584 Fey, G.T.K. and Shiu, R.F. and Premkumar, T. and Chen, C.L. (2003) Preparation and characterization of lithium nickel cobalt oxide powders via a wet chemistry processing. Materials Science and Engineering , b100. pp. 234-243. Fey, G.T.K. and Weng, Z.X. and Chen, J.G. and Premkumar, T. (2003) Electroanalytical studies on sol–gel derived LiNi0.8Co0.2O2. Materials Chemistry and Physics, 82. pp. 5-15. ISSN 0254-0584 Fey, G.T.K. and Yang, H.Z. and Premkumar, T. (2003) Structural, Thermal and Electrochemical Properties of Chromium-Substituted LiNi0.sCo0.zO 2. Ionics, 9. pp. 182-188. ISSN 0947-7047 GGeetha, S. and Trivedi, D.C. (2003) Properties and applications of chloroaluminate as room temperature ionic liquid. Bulletin of Electrochemistry, 19 (01). pp. 37-48. ISSN 0256-1654 Gomathi, H. and Jayalakshmi, M. and Joseph, J. and Vittal, R. (2003) Electrochemistry in electrochromism-manifestation by transition metal oxides. Bulletin of Electrochemistry, 19 (01). 09-16. ISSN 0256-1654 Gopukumar, S. and Jeong, Y. and Kim, K.B. (2003) Synthesis and electrochemical performance of tetravalent doped LiCoO2 in lithium rechargeable cells. Solid State Ionics, 159. pp. 223-232. Gurunathan, K. and Amalnerkar, D.P. and Trivedi, D.C. (2003) Synthesis and characterization of conducting polymer composite (PAn/TiO2) for cathode material in rechargeable battery. Materials Letters, 57. pp. 1642-1648. ISSN 0167-577X JJayaraman, K. and Velayutham, D. and Srinivasan, R.K. and Chidambaram, S. (2003) Isolation of ethylenediamine from industrial solution of ethylenediamine hydrochloride by electrodialysis. Journal of Chemical Technology and Biotechnology, 78. pp. 628-631. KKahol, P.K. and Perera, R.P. and Satheesh Kumar, K.K. and Geetha, S. and Trivedi, D.C. (2003) Electron localization length in polyaniline. Solid State Communications, 125. pp. 369-372. Kahol, P.K. and Satheesh Kumar, K.K. and Geetha, S. and Trivedi, D.C. (2003) Effect of dopants on electron localization length in polyaniline. Synthetic Metals, 139. pp. 191-200. Kalaiselvan, R. and Augustin, C.O. and Berchmans, L.J. and Saraswathi, R. (2003) Combustion synthesis of CuFe2O4. Materials Research Bulletin, 38 (01). pp. 41-54. ISSN 0025-5408 Kalyani, P. and Kalaiselvi, N. and Muniyandi, N. (2003) On the Effects of Simultaneous Substitution of Al3¿ and B3¿ in LiNiO2 Cathodes. Journal of the Electrochemical Society, 150 (6). A759-A764. ISSN 0013-4651 Kalyani, P. and Kalaiselvi, N. and Muniyandi, N. (2003) An innovative soft-chemistry approach to synthesize LiNiVO4. Materials Chemistry and Physics, 77. pp. 662-668. ISSN 0254-0584 Kalyani, P. and Kalaiselvi, N. and Renganathan, N.G. (2003) Microwave-assisted synthesis of LiNiO2—a preliminary investigation. Journal of Power Sources, 123. pp. 53-60. ISSN 0378-7753 Karthik, R. and Raja, R.J. and Ramasamy, M. and Sheela, G. and Madhu, S. and Kennedy, S. and Rao, C.R.K. and Pushpavanam, M. (2003) Effect of addition agents on the electrodeposition of INVAR alloys. Transactions of the Institute of Metal Finishing, 81 (02). pp. 68-72. ISSN 0020-2967 Kennedy, C.J. and Rethinam, A.J. (2003) Thermally coated Ti/TiO2 as cathode material for the synthesis of succinic and dihydrophthalic acids. Journal of Applied Electrochemistry, 33. pp. 831-834. ISSN 0021-891X Kim, Y.T. and Gopukumar, S. and Kim, K.B. and Cho, B.W. (2003) Performance of electrostatic spray-deposited vanadium pentoxide in lithium secondary cells. Journal of Power Sources, 117. pp. 110-117. ISSN 0378-7753 Kokila, P. and Sarma, R.L. and Sreeveeraraghavan, S. (2003) Corrosion resistance of copper deposits produced from different electrolytes. Transactions of the Institute of Metal Finishing, 81 (03). pp. 89-92. ISSN 0020-2967 LLee, Y.H. and Pan, K.C. and Lin, Y.Y. and Premkumar, T. and Fey, G.T.K. (2003) Lithium intercalation in graphites precipitated from pig iron melts. Materials Chemistry and Physics, 82. pp. 750-757. ISSN 0254-0584 Lee, Y.H. and Pan, K.C. and Lin, Y.Y. and Subramanian, V. and Premkumar, T. and Fey, G.T.K. (2003) Graphite with fullerene and filamentous carbon structures formed from iron melt as a lithium-intercalating anode. Materials Letters, 57. pp. 1113-1119. ISSN 0167-577X MMani, N. and Iyer, S.V.K. and Lalbahadur, . (2003) Influence of anions on the inhibition of corrosion of zinc in acidic solutions by n-heterocyclics. Bulletin of Electrochemistry, 19 (02). pp. 53-60. ISSN 0256-1654 Manuelstephan, A. and Teeters, D. (2003) Characterization of PVdF-HFP polymer membranes prepared by phase inversion techniques I. Morphology and charge/discharge studies. Electrochimica Acta, 48. pp. 2143-2148. ISSN 0013-4686 Maruthamuthu, S. and Ponmariappan, S. and Mohanan, S. and Palaniswamy, N. and Palaniappan, R. and Rengaswamy, N.S. (2003) Control of metallic corrosion through microbiological route. Indian Journal of Experimental Biology, 41 (09). pp. 1023-1029. ISSN 0019-5189 Mohan, S. and Krishnan, R.M. and Renganathan, N.G. and Raman, S. and Ganeskesari, B. and Latha, H. (2003) Corrosion studies on pulsed and direct current chromium deposits. Transactions of the Institute of Metal Finishing, 81 (05). pp. 172-175. ISSN 0020-2967 Mohandas, K.S. and Sanil, N. and Noel, M. and Rodriguez, P. (2003) Electrochemical intercalation of aluminium chloride in graphite in the molten sodium chloroaluminate medium. Carbon, 41. pp. 927-932. Murali, K.R. (2003) Structural, optical and photoelectrochemical properties of brush plated CdSex Te1−x thin films. Journal of Materials Science, 38. 3845 -3849. ISSN 0022-2461 Muthukumar, N. and Mohanan, S. and Maruthamuthu, S. and Subramanian, P. and Palaniswamy, N. and Raghavan, M. (2003) Role of Brucella sp. and Gallionella sp. in oil degradation and corrosion. Electrochemistry Communications, 5. pp. 421-425. ISSN 1388-2481 Muthukumar, N. and Rajasekar, A. and Ponmariappan, S. and Mohanan, S. and Maruthamuthu, S. and Muralidharan, S. and Subramanian, P. and Palaniswamy, N. and Raghavan, M. (2003) Microbiologically influenced corrosion in petroleum product pipelines - a review. Indian Journal of Experimental Biology, 41 (09). pp. 1012-1022. ISSN 0019-5189 NNakamura, T. and Takeyama, T. and Takahashi, N. and Jagannathan, R. and Karthikeyani, A. and Smith, G.M. and Riedi, P.C. (2003) High-frequency EPR investigation of X-ray storage SrBPO5:Eu phosphor. Journal of Luminescence. pp. 369-372. Nawazkhan, F. and Jayakumar, R. and Pillai, C.N. (2003) Electrocatalytic oxidative cleavage by electrogenerated periodate. Journal of Molecular Catalysis. pp. 139-145. ISSN 1381-1169 PPalraj, S. and Jayakrishnan, P. and Raghavan, M. (2003) Effect of conversion coatings on the performance of chlorinated rubber primer on aluminium. Surface Coatings International Part B: Coatings Transactions, 86 (01). pp. 71-74. ISSN 1476-4865 Pandiyan, D.P. and Marikani, A. and Murali, K.R. (2003) Influence of thickness and substrate temperature on electrical and photoelectrical properties of vacuum-deposited CdSe thin films. Materials Chemistry and Physics, 78. pp. 51-58. ISSN 0254-0584 Paramasivam, M. and Jayachandran, M. and Iyer, S.V.K. (2003) Influence of alloying additives on the performance of commercial grade aluminium as galvanic anode in alkaline zincate solution for use in primary alkaline batteries. Journal of Applied Electrochemistry, 33. pp. 303-309. ISSN 0021-891X Park, I.S. and Jang, S.R. and Hong, J.S. and Vittal, R. and Kim, K.J. (2003) Preparation of Composite Anatase TiO2 Nanostructure by Precipitation from Hydrolyzed TiCl4 Solution Using Anodic Alumina Membrane. Chemistry of Materials, 15 (24). pp. 4633-4636. ISSN 0897-4756 RRaj, V. and Kanagaraj, D. and Mohan, S. (2003) Effect of sealing agents on the corrosion behaviour of sulphamic acid anodized alumina films. Transactions of the Institute of Metal Finishing, 81 (03). pp. 83-88. ISSN 0020-2967 Raj, V. and Rajaram, M.P. and Balasubramanian, G. and Vincent, S. and Kanagaraj, D. (2003) Pulse anodizing - an overview. Transactions of the Institute of Metal Finishing, 81 (04). pp. 114-121. ISSN 0020-2967 Rajendran, S. and Vaibhavi, S. and Anthony, N. and Trivedi, D.C. (2003) Transport of inhibitors and corrosion inhibition efficiency. Corrosion, 59 (06). pp. 529-534. Ramamoorthy, K. and Sanjeeviraja, C. and Jayachandran, M. and Sankaranarayanan, K. and Misra, P. and Kukreja, L.M. (2003) Epi-n-ZnO//100S Si, GaAs and InP by L-MBE: A novel approach for III–V devices. Materials Science in Semiconductor Processing, 6. pp. 219-224. Ramesh, S. and Rajeswari, S. and Maruthamuthu, S. (2003) Effect of inhibitors and biocide on corrosion control of mild steel in natural aqueous environment. Materials Letters, 57. pp. 4547-4554. ISSN 0167-577X Ravindran, V. and Muralidharan, V.S. (2003) Electrodeposition of zinc-nickel alloy. Journal of Scientific and Industrial Research, 62 (07). pp. 718-722. ISSN 0022-4456 Rethinam, A.J. and Rameshbapu, G.N.K. and Muralidharan, V.S. (2003) Role of addition agents in zincate bath - a cyclic voltammetry study. Transactions of the Institute of Metal Finishing, 81 (04). pp. 136-140. ISSN 0020-2967 SSaito, Y. and Stephan, A.M. and Kataoka, H. (2003) Ionic conduction mechanisms of lithium gel polymer electrolytes investigated by the conductivity and diffusion coefficient. Solid State Ionics, 160. pp. 149-153. Saraswathy, V. and Muralidharan, S. and Thangavel, K. and Srinivasan, S. (2003) Influence of activated fly ash on corrosion-resistance and strength of concrete. Cement & Concrete Composites, 25. pp. 673-680. ISSN 0958-9465 Shankar, C. and Pushpavanam, M. (2003) Composition distribution in Zn-Ni alloy plating. Transactions of the Metal Finishers' of India, 12 (03). pp. 220-223. Sheela, B. and Sathyajith, R. and Yegnaraman, V. (2003) Layer-by-layer assembly of 1,4-diaminoanthraquinone and glucose oxidase. Materials Chemistry and Physics, 77. pp. 390-396. ISSN 0254-0584 Shu, D. and Gopukumar, S. and Kim, K.B. and Ryu, K.S. and Chang, S.H. (2003) Surface modification of LiMn2O4 thin films at elevated temperature. Solid State Ionics, 160. pp. 227-233. Srinivasan, G.N. and Iyer, S.V.K. (2003) Electrolytic dissolution of sphalerite concentrate in hydrochloric acid. Bulletin of Electrochemistry, 19 (02). pp. 61-66. ISSN 0256-1654 Srinivasan, K.N. and John, S. and Karthikeyan, S. and Vasudevan, T. (2003) Studies on electroless nickel-phosphorous molybdenum sulphide composite coatings. Transactions of the Metal Finishers of India, 12 (03). pp. 143-147. Stephan, A.M. and Teeters, D. (2003) Charge–discharge studies on a lithium cell composed of PVdF-HFP polymer membranes prepared by phase inversion technique with a nanocomposite cathode. Journal of Power Sources. pp. 460-464. ISSN 0378-7753 Subbiah, A. and Chellammal, S. and Basha, C.A. and Raghavan, M. (2003) Electrochemical treatment of xylenol orange dye wastewater at RuO2/Ti anode. Bulletin of Electrochemistry, 19 (03). pp. 127-132. ISSN 0256-1654 Subramanian, B. and Sanjeeviraja, C. and Jayachandran, M. (2003) Materials properties of electrodeposited SnS0.5Se0.5 films and characterization of photoelectrochemical solar cells. Materials Research Bulletin, 38. pp. 899-908. ISSN 0025-5408 Subramanian, B. and Sanjeeviraja, C. and Jayachandran, M. (2003) Photoelectrochemical characteristics of brush plated tin sulfide thin films. Solar Energy Materials and Solar Cells, 79. pp. 57-65. ISSN 0927-0248 TTrivedi, D.C. (2003) Conducting polymer coatings - recent advances. Transactions of the Metal Finishers of India, 12 (03). pp. 175-183. VVedalakshmi, R. and Sundararaj, A. and Srinivasan, S. and Ganeshbabu, K. (2003) Quantification of hydrated cement products of blended cements in low and medium strength concrete using TG and DTA technique. Thermochimica Acta, 407. pp. 49-60. ISSN 0040-6031 Vijayalakshmi, R. and Jayachandran, M. and Sanjeeviraja, C. (2003) Structural, electrochromic and FT-IR studies on electrodeposited tungsten trioxide films. Current Applied Physics, 3. pp. 171-175. ISSN 1567-1739 ZZou, M. and Yoshio, M. and Gopukumar, S. and Yamaki, J.I. (2003) Synthesis of High-Voltage (4.5 V) Cycling Doped LiCoO2 for Use in Lithium Rechargeable Cells. Chemistry of Materials, 15 (25). ISSN 0897-4756 |